Abhishek, when sometime its working fine means 2nd board network connection is reachable to first node. you can conform this by executing same #gluster peer status command. Thanks, Gaurav ----- Original Message ----- From: "ABHISHEK PALIWAL" <abhishpaliwal@xxxxxxxxx> To: "Gaurav Garg" <ggarg@xxxxxxxxxx> Cc: gluster-users@xxxxxxxxxxx Sent: Friday, February 19, 2016 3:12:22 PM Subject: Re: Issue in Adding/Removing the gluster node Hi Gaurav, Yes, you are right actually I am force fully detaching the node from the slave and when we removed the board it disconnected from the another board. but my question is I am doing this process multiple time some time it works fine but some time it gave these errors. you can see the following logs from cmd_history.log file [2016-02-18 10:03:34.497996] : volume set c_glusterfs nfs.disable on : SUCCESS [2016-02-18 10:03:34.915036] : volume start c_glusterfs force : SUCCESS [2016-02-18 10:03:40.250326] : volume status : SUCCESS [2016-02-18 10:03:40.273275] : volume status : SUCCESS [2016-02-18 10:03:40.601472] : volume remove-brick c_glusterfs replica 1 10.32.1.144:/opt/lvmdir/c2/brick force : SUCCESS [2016-02-18 10:03:40.885973] : peer detach 10.32.1.144 : SUCCESS [2016-02-18 10:03:42.065038] : peer probe 10.32.1.144 : SUCCESS [2016-02-18 10:03:44.563546] : volume add-brick c_glusterfs replica 2 10.32.1.144:/opt/lvmdir/c2/brick force : SUCCESS [2016-02-18 10:30:53.297415] : volume status : SUCCESS [2016-02-18 10:30:53.313096] : volume status : SUCCESS [2016-02-18 10:37:02.748714] : volume status : SUCCESS [2016-02-18 10:37:02.762091] : volume status : SUCCESS [2016-02-18 10:37:02.816089] : volume remove-brick c_glusterfs replica 1 10.32.1.144:/opt/lvmdir/c2/brick force : FAILED : Incorrect brick 10.32.1.144:/opt/lvmdir/c2/brick for volume c_glusterfs On Fri, Feb 19, 2016 at 3:05 PM, Gaurav Garg <ggarg@xxxxxxxxxx> wrote: > Hi Abhishek, > > Seems your peer 10.32.1.144 have disconnected while doing remove brick. > see the below logs in glusterd: > > [2016-02-18 10:37:02.816009] E [MSGID: 106256] > [glusterd-brick-ops.c:1047:__glusterd_handle_remove_brick] 0-management: > Incorrect brick 10.32.1.144:/opt/lvmdir/c2/brick for volume c_glusterfs > [Invalid argument] > [2016-02-18 10:37:02.816061] E [MSGID: 106265] > [glusterd-brick-ops.c:1088:__glusterd_handle_remove_brick] 0-management: > Incorrect brick 10.32.1.144:/opt/lvmdir/c2/brick for volume c_glusterfs > The message "I [MSGID: 106004] > [glusterd-handler.c:5065:__glusterd_peer_rpc_notify] 0-management: Peer > <10.32.1.144> (<6adf57dc-c619-4e56-ae40-90e6aef75fe9>), in state <Peer in > Cluster>, has disconnected from glusterd." repeated 25 times between > [2016-02-18 10:35:43.131945] and [2016-02-18 10:36:58.160458] > > > > If you are facing the same issue now, could you paste your # gluster peer > status command output here. > > Thanks, > ~Gaurav > > ----- Original Message ----- > From: "ABHISHEK PALIWAL" <abhishpaliwal@xxxxxxxxx> > To: gluster-users@xxxxxxxxxxx > Sent: Friday, February 19, 2016 2:46:35 PM > Subject: Issue in Adding/Removing the gluster node > > Hi, > > > I am working on two board setup connecting to each other. Gluster version > 3.7.6 is running and added two bricks in replica 2 mode but when I manually > removed (detach) the one board from the setup I am getting the following > error. > > volume remove-brick c_glusterfs replica 1 10.32.1.144:/opt/lvmdir/c2/brick > force : FAILED : Incorrect brick 10.32.1.144:/opt/lvmdir/c2/brick for > volume c_glusterfs > > Please find the logs file as an attachment. > > > Regards, > Abhishek > > > _______________________________________________ > Gluster-users mailing list > Gluster-users@xxxxxxxxxxx > http://www.gluster.org/mailman/listinfo/gluster-users > -- Regards Abhishek Paliwal _______________________________________________ Gluster-users mailing list Gluster-users@xxxxxxxxxxx http://www.gluster.org/mailman/listinfo/gluster-users