Hi, I have installed Gluster 3.6.8 on our cluster and have created a gluster volume with bricks from several unused disk chunks from different nodes which run Suse 11 (SLES 11SP3 x86_64). I ran some test and everything seems to work fine on the cluster, ie. could read from and write to the gluster volume. However when I tried to install gluster on different workstations, all runing OpenSuse 12.3, I have failed completely. I tried different gluster versions (3.7, 3.6, 3.5,…), trying to satisfy the required dependencies in every case, but, despite the installation process seemed to complete without problems in many cases, gluster did not work on the workstations. Depending on the version installed, I got a segmentation fault when running the command “gluster”, or I got the gluster prompt but then it was inoperative (it did not do anything with any command other than “help”). In some cases I found that the gluster daemond could not start or, more probably, that it started and stopped right away. For example with the most recent version (gluster 3.7.6), when I ran the command /usr/local/sbin/gluterd –l gluster.log these were the contents of gluster.log: [2016-01-15 16:23:24.663512] I [MSGID: 100030] [glusterfsd.c:2318:main] 0-/usr/local/sbin/glusterd: Started running /usr/local/sbin/glusterd version 3.7.6 (args: /usr/local/sbin/glusterd -l gluster.log) [2016-01-15 16:23:24.666710] I [MSGID: 106478] [glusterd.c:1350:init] 0-management: Maximum allowed open file descriptors set to 65536 [2016-01-15 16:23:24.666761] I [MSGID: 106479] [glusterd.c:1399:init] 0-management: Using /var/lib/glusterd as working directory [2016-01-15 16:23:24.670374] E [socket.c:769:__socket_server_bind] 0-socket.management: binding to failed: Address is already in use [2016-01-15 16:23:24.670388] E [socket.c:772:__socket_server_bind] 0-socket.management: Port is already in use [2016-01-15 16:23:24.670399] W [rpcsvc.c:1604:rpcsvc_transport_create] 0-rpc-service: listening on transport failed [2016-01-15 16:23:24.670408] E [MSGID: 106243] [glusterd.c:1616:init] 0-management: creation of listener failed [2016-01-15 16:23:24.670416] E [MSGID: 101019] [xlator.c:428:xlator_init] 0-management: Initialization of volume 'management' failed, review your volfile again [2016-01-15 16:23:24.670422] E [graph.c:322:glusterfs_graph_init] 0-management: initializing translator failed [2016-01-15 16:23:24.670427] E [graph.c:661:glusterfs_graph_activate] 0-graph: init failed [2016-01-15 16:23:24.670586] W [glusterfsd.c:1236:cleanup_and_exit] (-->/usr/local/sbin/glusterd(glusterfs_volumes_init+0xc2) [0x409242] -->/usr/local/sbin/glusterd(glusterfs_process_volfp+0x116) [0x409136] -->/usr/local/sbin/glusterd(cleanup_and_exit+0x65) [0x408805] ) 0-: received signum (0), shutting down If there is anybody who has been able to install gluster on OpenSuse 12.3 and make it work, I would appreciate any suggestions. Regards, Jordi -------------------------------------------------------------------------------------- Jordi Bujons, PhD Dept. of Biological Chemistry and Molecular Modeling (QBMM) Institute of Advanced Chemistry of Catalonia (IQAC) National Research Council of Spain (CSIC) Address: Jordi Girona 18-26, 08034 Barcelona, Spain Phone: +34 934006100 ext. 1291 FAX: +34 932045904 --------------------------------------------------------------------------------------
|
_______________________________________________ Gluster-users mailing list Gluster-users@xxxxxxxxxxx http://www.gluster.org/mailman/listinfo/gluster-users
