On 11/17/2015 09:08 AM, Surya K Ghatty wrote: > Hi: > > I am running into the following error when trying to enable ganesha on > my system. This seems to be the same message as the one here: > https://bugzilla.redhat.com/show_bug.cgi?id=1004332. > > [root@conv-gls002 ~]# gluster volume set gvol0 ganesha.enable on > volume set: failed: Staging failed on gluster1. Error: One or more > connected clients cannot support the feature being set. These clients > need to be upgraded or disconnected before running this command again Some "client" — client usually means a gluster fuse client mount, or a gfapi client like the nfs-ganesha server — isn't using 3.7.x. Based on what I think your setup is that seems really unlikely. But see my comment/question at the end. > > However, I can execute some of the other gluster vol set commands. > > Here is the log: > [2015-11-17 13:51:48.629507] E [MSGID: 106289] > [glusterd-syncop.c:1871:gd_sync_task_begin] 0-management: Failed to > build payload for operation 'Volume Set' > [2015-11-17 13:51:56.698145] E [MSGID: 106022] > [glusterd-utils.c:10154:glusterd_check_client_op_version_support] > 0-management: One or more clients don't support the required op-version > [2015-11-17 13:51:56.698193] E [MSGID: 106301] > [glusterd-syncop.c:1274:gd_stage_op_phase] 0-management: Staging of > operation 'Volume Set' failed on localhost : One or more connected > clients cannot support the feature being set. These clients need to be > upgraded or disconnected before running this command again > [2015-11-17 13:54:32.759969] E [MSGID: 106022] > [glusterd-utils.c:10154:glusterd_check_client_op_version_support] > 0-management: One or more clients don't support the required op-version > [2015-11-17 13:54:32.760017] E [MSGID: 106301] > [glusterd-syncop.c:1274:gd_stage_op_phase] 0-management: Staging of > operation 'Volume Set' failed on localhost : One or more connected > clients cannot support the feature being set. These clients need to be > upgraded or disconnected before running this command again > [2015-11-17 13:55:15.930722] E [MSGID: 106022] > [glusterd-utils.c:10154:glusterd_check_client_op_version_support] > 0-management: One or more clients don't support the required op-version > [2015-11-17 13:55:15.930733] E [MSGID: 106301] > [glusterd-syncop.c:1274:gd_stage_op_phase] 0-management: Staging of > operation 'Volume Set' failed on localhost : One or more connected > clients cannot support the feature being set. These clients need to be > upgraded or disconnected before running this command again > > > The work around seems to upgrade the "clients" to a certain level or > disconnect them. What client is this message referring to? I am running > in a HA mode, and have two glusterfs nodes. Both have gluster at the > same level. (3.7.6). There are no lingering mounts, as far as I can tell. > > [root@conv-gls001 glusterfs]# gluster --version > glusterfs 3.7.6 built on Nov 9 2015 15:20:26 > ... > [root@conv-gls001 ~]# gluster --version > glusterfs 3.7.6 built on Nov 9 2015 15:20:26 These look like the same machine, i.e. conv-gls001. Is that really correct? Let's'see the output from the _other_ machine. -- Kaleb _______________________________________________ Gluster-users mailing list Gluster-users@xxxxxxxxxxx http://www.gluster.org/mailman/listinfo/gluster-users
