Hi:
I am running into the following error when trying to enable ganesha on my system. This seems to be the same message as the one here: https://bugzilla.redhat.com/show_bug.cgi?id=1004332.
[root@conv-gls002 ~]# gluster volume set gvol0 ganesha.enable on
volume set: failed: Staging failed on gluster1. Error: One or more connected clients cannot support the feature being set. These clients need to be upgraded or disconnected before running this command again
However, I can execute some of the other gluster vol set commands.
Here is the log:
[2015-11-17 13:51:48.629507] E [MSGID: 106289] [glusterd-syncop.c:1871:gd_sync_task_begin] 0-management: Failed to build payload for operation 'Volume Set'
[2015-11-17 13:51:56.698145] E [MSGID: 106022] [glusterd-utils.c:10154:glusterd_check_client_op_version_support] 0-management: One or more clients don't support the required op-version
[2015-11-17 13:51:56.698193] E [MSGID: 106301] [glusterd-syncop.c:1274:gd_stage_op_phase] 0-management: Staging of operation 'Volume Set' failed on localhost : One or more connected clients cannot support the feature being set. These clients need to be upgraded or disconnected before running this command again
[2015-11-17 13:54:32.759969] E [MSGID: 106022] [glusterd-utils.c:10154:glusterd_check_client_op_version_support] 0-management: One or more clients don't support the required op-version
[2015-11-17 13:54:32.760017] E [MSGID: 106301] [glusterd-syncop.c:1274:gd_stage_op_phase] 0-management: Staging of operation 'Volume Set' failed on localhost : One or more connected clients cannot support the feature being set. These clients need to be upgraded or disconnected before running this command again
[2015-11-17 13:55:15.930722] E [MSGID: 106022] [glusterd-utils.c:10154:glusterd_check_client_op_version_support] 0-management: One or more clients don't support the required op-version
[2015-11-17 13:55:15.930733] E [MSGID: 106301] [glusterd-syncop.c:1274:gd_stage_op_phase] 0-management: Staging of operation 'Volume Set' failed on localhost : One or more connected clients cannot support the feature being set. These clients need to be upgraded or disconnected before running this command again
The work around seems to upgrade the "clients" to a certain level or disconnect them. What client is this message referring to? I am running in a HA mode, and have two glusterfs nodes. Both have gluster at the same level. (3.7.6). There are no lingering mounts, as far as I can tell.
[root@conv-gls001 glusterfs]# gluster --version
glusterfs 3.7.6 built on Nov 9 2015 15:20:26
Repository revision: git://git.gluster.com/glusterfs.git
Copyright (c) 2006-2011 Gluster Inc. <http://www.gluster.com>
GlusterFS comes with ABSOLUTELY NO WARRANTY.
You may redistribute copies of GlusterFS under the terms of the GNU General Public License.
[root@conv-gls001 ~]# gluster --version
glusterfs 3.7.6 built on Nov 9 2015 15:20:26
Repository revision: git://git.gluster.com/glusterfs.git
Copyright (c) 2006-2011 Gluster Inc. <http://www.gluster.com>
GlusterFS comes with ABSOLUTELY NO WARRANTY.
You may redistribute copies of GlusterFS under the terms of the GNU General Public License.
I would appreciate any help! Thanks!
Regards,
Surya Ghatty
"This too shall pass"
________________________________________________________________________________________________________
Surya Ghatty | Software Engineer | IBM Cloud Infrastructure Services Development | tel: (507) 316-0559 | ghatty@xxxxxxxxxx
_______________________________________________ Gluster-users mailing list Gluster-users@xxxxxxxxxxx http://www.gluster.org/mailman/listinfo/gluster-users
