Trying now, will ping you soon, thanks! -----Original Message----- From: Vijay Bellur [mailto:vbellur@xxxxxxxxxx] Sent: Friday, October 23, 2015 2:27 PM To: Mayzel, Eugene; gluster-users@xxxxxxxxxxx Subject: Re: building bricks in AWS off an EBS snapshot On Friday 23 October 2015 11:40 PM, Mayzel, Eugene wrote: > Yes, this is what I do, since otherwise I get the famous "already part of a volume " error. > After extensive googling I found that the following needs to be done to clean up any past gluster traces from a brick: > > setfattr -x trusted.glusterfs.volume-id <brick-path> setfattr -x > trusted.gfid <brick-path> Only these two steps should be sufficient. Can you try it over and check if the results are any different? Regards, Vijay ----- No virus found in this message. Checked by AVG - www.avg.com Version: 2015.0.6172 / Virus Database: 4450/10875 - Release Date: 10/23/15 The information contained in this communication is intended for the use of the designated recipients named above. If the reader of this communication is not the intended recipient, you are hereby notified that you have received this communication in error, and that any review, dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify The Associated Press immediately by telephone at +1-212-621-1898 and delete this email. Thank you. [IP_US_DISC] msk dccc60c6d2c3a6438f0cf467d9a4938 _______________________________________________ Gluster-users mailing list Gluster-users@xxxxxxxxxxx http://www.gluster.org/mailman/listinfo/gluster-users
