Hi Alessandro,
Response inline.
On 06/17/2015 08:07 PM, Alessandro De Salvo wrote:
Hi,
I do not seem to be able to find an option to automatically add the gluster volume restrictions I can put with auth.allow into a ganesha export.
As far as I have understood this can be done by using a default Access_type = None in the export and then adding one or more CLIENT block for the specific hosts. However, setting ganesha.enable to a gluster volume, does create an export with default Access_type = RW and no client block, and as a result the export is world Readable and Writable. Is there anything I’m missing or is the feature not yet supported?
The same holds for the Posix ACLs, the automatically created export file has them disabled, and I did not find any option to enable them from the gluster CLI.
you are right. CLI exports the volume with only certain default export
parameters. For any change in those export options, do the following
step 1) Edit the export_file for that volume in the path
"/etc/ganesha/exports/"
step 2) use 'refresh_config' option of the ganesha-ha.sh script
available at '/usr/libexec/ganesha/' (which is under development at
present). Meanwhile , use dbus-commands to unexport and re-export the
volumes.
dbus-send --print-reply --system --dest=org.ganesha.nfsd
/org/ganesha/nfsd/ExportMgr org.ganesha.nfsd.exportmgr.RemoveExport
uint16:<export_id_of_the_volume>
dbus-send --print-reply --system --dest=org.ganesha.nfsd
/org/ganesha/nfsd/ExportMgr org.ganesha.nfsd.exportmgr.AddExport
string:/<path-to-export-file> string:"EXPORT(Path=/<volname>)"
Thanks,
Soumya
Thanks,
Alessandro
_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
http://www.gluster.org/mailman/listinfo/gluster-users
_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
http://www.gluster.org/mailman/listinfo/gluster-users
