On 05/10/2015 08:29 PM, Mathieu Chateau
wrote:
Hello,
Short way: Is there any way to define a preferred Gluster
server ?
Long way:
I have the following setup (version 3.6.3) :
Gluster A <==> VPN <==> Gluster B
Volume is replicated between A and B.
They are in same datacenter, using a 1Gb/s connection,
low latency (0.5ms)
I have gluster clients in lan A & B.
When doing a "ls" on big folder (~60k files), both
gluster node are used, and so it need 9mn instead on 1mn if
only the local gluster is reachable.
Lookups (and writes of course) from clients are sent to both bricks
because AFR uses the result of the lookup to select which brick to
read from if there is a pending heal etc.
If the file is clean on both A and B, then reads are always served
from the local brick. i.e. reads on clients mounted on A will be
served from the brick in A (and likewise for B).
Hope that helps,
Ravi
It's HA setup, application is present on both side. I
would like a master/master setup, but using only local node
as possible.
_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
http://www.gluster.org/mailman/listinfo/gluster-users
|
_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
http://www.gluster.org/mailman/listinfo/gluster-users
