----- Original Message ----- > From: "wodel youchi" <wodel.youchi@xxxxxxxxx> > To: "gluster-users" <gluster-users@xxxxxxxxxxx> > Sent: Thursday, March 12, 2015 6:15:20 PM > Subject: Need advice: GlusterFS replicated on arrays with different speed!!! > > Hi, > > Please I need some advice. > > We have two iSCSI disk arrays, the first with 16 (2.5") disks, 600Go SAS 10K > each, the second 5 (3.5") disks, 4To SATA 7200 each. > > is it wise to configure GlusterFS replicated volumes upon arrays with > different speed? I would try to match similar speed drives in replicated pairs. When you create the volume do something like: gluster v create testvol transport tcp replica 2 node1:/fast node2:/fast node3:/slow node4:/slow I can't think of anything functionally that would cause a problem, you would only write as fast as your slowest brick in the pair though. I see something similar when a disk in my RAID goes bad and starts running in degraded mode. Things work you are just limited to the speed of the slowest brick in the replicated pair. -b > Thanks in advance. > > _______________________________________________ > Gluster-users mailing list > Gluster-users@xxxxxxxxxxx > http://www.gluster.org/mailman/listinfo/gluster-users _______________________________________________ Gluster-users mailing list Gluster-users@xxxxxxxxxxx http://www.gluster.org/mailman/listinfo/gluster-users
