On Sun, Jun 01, 2014 at 09:30:53AM -0400, Gene Liverman wrote: > Ahh, so should I just run that script manually and be done with it? Does > that mean that when we eventually do reboot that it will automatically load > itself from then on? Thanks! Yes, you can run the script manually (it only does 'modprobe fuse'). After a reboot the fuse module should be loaded very early during the boot process. There should be no issues related to fuse when mounting is done afterwards. Cheers, Niels > > -- > Gene Liverman > Systems Administrator > Information Technology Services > University of West Georgia > gliverma@xxxxxxxxxx > > ITS: Making Technology Work for You! > > This e-mail and any attachments may contain confidential and privileged > information. If you are not the intended recipient, please notify the > sender immediately by return mail, delete this message, and destroy any > copies. Any dissemination or use of this information by a person other than > the intended recipient is unauthorized and may be illegal or actionable by > law. > > On Jun 1, 2014 3:47 AM, "Niels de Vos" <ndevos@xxxxxxxxxx> wrote: > > > On Sun, Jun 01, 2014 at 03:51:58AM +0000, Franco Broi wrote: > > > Doesn't work for me either on Centos 5, have to modprobe fuse. > > > > > > On 1 Jun 2014 10:46, Gene Liverman <gliverma@xxxxxxxxxx> wrote: > > > Just setup my first Gluster share (replicated on 3 nodes) and it works > > > fine on RHEL 6 but when trying to mount it on RHEL 5.8 I get the > > > following in my logs: > > > > > > [2014-06-01 02:01:29.580163] I [glusterfsd.c:1959:main] > > 0-/usr/sbin/glusterfs: Started running /usr/sbin/glusterfs version 3.5.0 > > (/usr/sbin/glusterfs --volfile-server=eapps-gluster01 --volfile-id=/gv0 > > /eapps/shared) > > > [2014-06-01 02:01:29.581147] E [mount.c:267:gf_fuse_mount] > > 0-glusterfs-fuse: cannot open /dev/fuse (No such file or directory) > > > [2014-06-01 02:01:29.581207] E [xlator.c:403:xlator_init] 0-fuse: > > Initialization of volume 'fuse' failed, review your volfile again > > > > > > I installed glusterfs and glusterfs-fuse from > > http://download.gluster.org/pub/gluster/glusterfs/LATEST/RHEL/glusterfs-epel.repo.el5 > > and got have the following currently: > > > # rpm -qa |grep -i gluster > > > glusterfs-libs-3.5.0-2.el5 > > > glusterfs-3.5.0-2.el5 > > > glusterfs-fuse-3.5.0-2.el5 > > > > > > Everything I have read online says that I should not have to manually > > > install fuse or manually run modprobe or manually make /dev/fuse so > > > I am lost as to why this is not working. Any tips on what to do next? > > > > Indeed, that should not be needed. I guess you installed the > > gluster-fuse package after a basic installation and the system did not > > reboot yet with glusterfs-fuse installed. On EL5, udev (I think) does > > not automatically load the fuse module if /dev/fuse is accessed. The > > glusterfs-fuse package contains a script that loads the module when the > > system boots (/etc/sysconfig/modules/glusterfs-fuse.modules). > > > > I am not sure if it would be better to load the module immediately when > > glusterfs-fuse gets installed. > > > > Niels > > _______________________________________________ Gluster-users mailing list Gluster-users@xxxxxxxxxxx http://supercolony.gluster.org/mailman/listinfo/gluster-users
