On Sun, Jun 01, 2014 at 03:51:58AM +0000, Franco Broi wrote: > Doesn't work for me either on Centos 5, have to modprobe fuse. > > On 1 Jun 2014 10:46, Gene Liverman <gliverma@xxxxxxxxxx> wrote: > Just setup my first Gluster share (replicated on 3 nodes) and it works > fine on RHEL 6 but when trying to mount it on RHEL 5.8 I get the > following in my logs: > > [2014-06-01 02:01:29.580163] I [glusterfsd.c:1959:main] 0-/usr/sbin/glusterfs: Started running /usr/sbin/glusterfs version 3.5.0 (/usr/sbin/glusterfs --volfile-server=eapps-gluster01 --volfile-id=/gv0 /eapps/shared) > [2014-06-01 02:01:29.581147] E [mount.c:267:gf_fuse_mount] 0-glusterfs-fuse: cannot open /dev/fuse (No such file or directory) > [2014-06-01 02:01:29.581207] E [xlator.c:403:xlator_init] 0-fuse: Initialization of volume 'fuse' failed, review your volfile again > > I installed glusterfs and glusterfs-fuse from http://download.gluster.org/pub/gluster/glusterfs/LATEST/RHEL/glusterfs-epel.repo.el5 and got have the following currently: > # rpm -qa |grep -i gluster > glusterfs-libs-3.5.0-2.el5 > glusterfs-3.5.0-2.el5 > glusterfs-fuse-3.5.0-2.el5 > > Everything I have read online says that I should not have to manually > install fuse or manually run modprobe or manually make /dev/fuse so > I am lost as to why this is not working. Any tips on what to do next? Indeed, that should not be needed. I guess you installed the gluster-fuse package after a basic installation and the system did not reboot yet with glusterfs-fuse installed. On EL5, udev (I think) does not automatically load the fuse module if /dev/fuse is accessed. The glusterfs-fuse package contains a script that loads the module when the system boots (/etc/sysconfig/modules/glusterfs-fuse.modules). I am not sure if it would be better to load the module immediately when glusterfs-fuse gets installed. Niels _______________________________________________ Gluster-users mailing list Gluster-users@xxxxxxxxxxx http://supercolony.gluster.org/mailman/listinfo/gluster-users
