ACL issue with 3.4.0 GA + XFS + native client?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Even with the volume stopped, I was unable to unset stat-prefetch.
Anything else I should look at?

On 07/23/2013 02:55 PM, Nicholas Majeran wrote:
> FWIW, I tried to disable the parameter on a stopped volume, which was 
> successful.  I then started the volume and I could get/set the ACLs 
> normally.
>
> I'm going to try the same procedure on the gv0 volume that threw the 
> error previously.
> Thanks.
>
> On 07/23/2013 02:29 PM, Nicholas Majeran wrote:
>> When I tried to disable that parameter, I receive the following:
>>
>> gluster> volume set gv0 stat-prefetch off
>> volume set: failed: One or more connected clients cannot support the 
>> feature being set. These clients need to be upgraded or disconnected 
>> before running this command again
>>
>> AFAICT, all the nodes are at the same version, but I did this this in 
>> the logs I after I ran the command:
>>
>> [2013-07-23 19:26:02.673304] E 
>> [glusterd-op-sm.c:370:glusterd_check_client_op_version_support] 
>> 0-management: One or more clients don't support the required op-version
>> [2013-07-23 19:26:02.673325] E 
>> [glusterd-syncop.c:767:gd_stage_op_phase] 0-management: Staging of 
>> operation 'Volume Set' failed on localhost : One or more connected 
>> clients cannot support the feature being set. These clients need to 
>> be upgraded or disconnected before running this command again
>> [2013-07-23 19:26:03.590547] E [socket.c:2788:socket_connect] 
>> 0-management: connection attempt failed (Connection refused)
>> [2013-07-23 19:26:06.591224] E [socket.c:2788:socket_connect] 
>> 0-management: connection attempt failed (Connection refused)
>> [2013-07-23 19:26:09.591912] E [socket.c:2788:socket_connect] 
>> 0-management: connection attempt failed (Connection refused)
>> [2013-07-23 19:26:12.592601] E [socket.c:2788:socket_connect] 
>> 0-management: connection attempt failed (Connection refused)
>> [2013-07-23 19:26:15.593282] E [socket.c:2788:socket_connect] 
>> 0-management: connection attempt failed (Connection refused)
>> [2013-07-23 19:26:18.593946] E [socket.c:2788:socket_connect] 
>> 0-management: connection attempt failed (Connection refused)
>>
>>
>> On 07/23/2013 01:45 PM, Vijay Bellur wrote:
>>> On 07/23/2013 09:28 PM, Nicholas Majeran wrote:
>>>> A little more detail... on files, I still can't get this to work, but
>>>> when I run ls and {get,set}facl on . it seems to work:
>>>>
>>>> [root at s1 tmp]# pwd
>>>> /mnt/glusterfs/tmp
>>>> [root at s1 tmp]# ls -ld .
>>>> drwxrwxr-x+ 4 nmajeran root 4422 Jul 22 15:29 .
>>>> [root at suncosmbgw1 tmp]# ls -ld ../tmp
>>>> drwxrwxr-x 4 nmajeran root 4422 Jul 22 15:29 ../tmp
>>>> [root at s1 tmp]# getfacl .
>>>> # file: .
>>>> # owner: nmajeran
>>>> # group: root
>>>> user::rwx
>>>> user:root:rwx
>>>> user:user1:rwx
>>>> group::r-x
>>>> group:g1:rwx
>>>> group:g2:r-x
>>>> group:g3:r-x
>>>> mask::rwx
>>>> other::r-x
>>>>
>>>> [root at s1 tmp]# getfacl ../tmp
>>>> # file: ../tmp
>>>> # owner: nmajeran
>>>> # group: root
>>>> user::rwx
>>>> group::rwx
>>>> other::r-x
>>>>
>>>
>>>
>>> Does disabling stat-prefetch address the problem permanently? You 
>>> can disable stat-prefetch via:
>>>
>>> gluster volume set <volname> stat-prefetch off
>>>
>>> -Vijay
>>>
>>
>> _______________________________________________
>> Gluster-users mailing list
>> Gluster-users at gluster.org
>> http://supercolony.gluster.org/mailman/listinfo/gluster-users
>

-- 
Nick Majeran
Sun Trading LLC
312-229-9608



[Index of Archives]     [Gluster Development]     [Linux Filesytems Development]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux