When I tried to disable that parameter, I receive the following:
gluster> volume set gv0 stat-prefetch off
volume set: failed: One or more connected clients cannot support the
feature being set. These clients need to be upgraded or disconnected
before running this command again
AFAICT, all the nodes are at the same version, but I did this this in
the logs I after I ran the command:
[2013-07-23 19:26:02.673304] E
[glusterd-op-sm.c:370:glusterd_check_client_op_version_support]
0-management: One or more clients don't support the required op-version
[2013-07-23 19:26:02.673325] E [glusterd-syncop.c:767:gd_stage_op_phase]
0-management: Staging of operation 'Volume Set' failed on localhost :
One or more connected clients cannot support the feature being set.
These clients need to be upgraded or disconnected before running this
command again
[2013-07-23 19:26:03.590547] E [socket.c:2788:socket_connect]
0-management: connection attempt failed (Connection refused)
[2013-07-23 19:26:06.591224] E [socket.c:2788:socket_connect]
0-management: connection attempt failed (Connection refused)
[2013-07-23 19:26:09.591912] E [socket.c:2788:socket_connect]
0-management: connection attempt failed (Connection refused)
[2013-07-23 19:26:12.592601] E [socket.c:2788:socket_connect]
0-management: connection attempt failed (Connection refused)
[2013-07-23 19:26:15.593282] E [socket.c:2788:socket_connect]
0-management: connection attempt failed (Connection refused)
[2013-07-23 19:26:18.593946] E [socket.c:2788:socket_connect]
0-management: connection attempt failed (Connection refused)
On 07/23/2013 01:45 PM, Vijay Bellur wrote:
> On 07/23/2013 09:28 PM, Nicholas Majeran wrote:
>> A little more detail... on files, I still can't get this to work, but
>> when I run ls and {get,set}facl on . it seems to work:
>>
>> [root at s1 tmp]# pwd
>> /mnt/glusterfs/tmp
>> [root at s1 tmp]# ls -ld .
>> drwxrwxr-x+ 4 nmajeran root 4422 Jul 22 15:29 .
>> [root at suncosmbgw1 tmp]# ls -ld ../tmp
>> drwxrwxr-x 4 nmajeran root 4422 Jul 22 15:29 ../tmp
>> [root at s1 tmp]# getfacl .
>> # file: .
>> # owner: nmajeran
>> # group: root
>> user::rwx
>> user:root:rwx
>> user:user1:rwx
>> group::r-x
>> group:g1:rwx
>> group:g2:r-x
>> group:g3:r-x
>> mask::rwx
>> other::r-x
>>
>> [root at s1 tmp]# getfacl ../tmp
>> # file: ../tmp
>> # owner: nmajeran
>> # group: root
>> user::rwx
>> group::rwx
>> other::r-x
>>
>
>
> Does disabling stat-prefetch address the problem permanently? You can
> disable stat-prefetch via:
>
> gluster volume set <volname> stat-prefetch off
>
> -Vijay
>
