Thanks, Brian, for the hint.
I've changed /etc/hosts with respect to your comment, but it didn't help
either.
The problem (from my perspective) in smth else, e.g. why, when I try to do
the following, I see the blank response in tcpdump:
[root at host1 ~]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast
state DOWN qlen 1000
link/ether 00:25:90:30:34:42 brd ff:ff:ff:ff:ff:ff
inet 46.../27 brd 46.182.25.159 scope global eth0
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state
UP qlen 1000
link/ether 00:25:90:30:34:43 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.192/24 brd 192.168.1.255 scope global eth1
[root at host1 ~]# tcpdump -i eth1 'port 27004'
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on eth1, link-type EN10MB (Ethernet), capture size 65535 bytes
^Z
[2]+ Stopped tcpdump -i eth1 'port 27004'
[root at host1 ~]# bg
[2]+ tcpdump -i eth1 'port 27004' &
[root at host1 ~]# gluster peer probe host2
Probe on localhost not needed
[root at host1 ~]# fg
tcpdump -i eth1 'port 27004'
^C
0 packets captured
117 packets received by filter
52 packets dropped by kernel
So (by whatever reason) Gluster doesn't send a packet to anywhere through
ethernet.
Guys, any ideas?
Thanks,
BR,
vy
On Mon, Jul 2, 2012 at 6:06 PM, Brian Candler <B.Candler at pobox.com> wrote:
> On Mon, Jul 02, 2012 at 05:54:46PM +0400, Vladimir Yakovlev wrote:
> > I tried different configurations, the latest follows:
> > [root at host1 ~]# cat /etc/hosts
> > 127.0.0.1 localhost localhost.localdomain localhost4
> > localhost4.localdomain4
> > 127.0.0.1 host1 host1.fqdn
> > 192.168.1.193 host2 host2.fqdn
> > [root at host2 ~]# cat /etc/hosts
> > 127.0.0.1 localhost localhost.localdomain localhost4
> > localhost4.localdomain4
> > 127.0.0.1 host2 host2.fqdn
> > 192.168.1.192 host1 host1.fqdn
>
> Be consistent. Both machines should have:
>
> 127.0.0.1 localhost localhost.localdomain
> 192.168.1.192 host1.fqdn host1
> 192.168.1.193 host2.fqdn host2
>
> On host1 you should have "host1.fqdn" in /etc/hostname, and the command
> "hostname" should show it. (Ditto for host2, but with "host2.fqdn" of
> course)
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://gluster.org/pipermail/gluster-users/attachments/20120702/8a2abb5b/attachment.htm>
