-mode (which is not supported in 3.1.x). Hence please use --direct-io-mode = and let us know whether the issue still persists. regards, ----- Original Message ----- From: "Kakaletris Kostas" <kkakas at yahoo.gr> To: "Raghavendra G" <raghavendra at gluster.com> Cc: gluster-users at gluster.org Sent: Wednesday, December 1, 2010 3:34:10 PM Subject: Re: glusterfs 3.1.0 disable-io-mode Hello, I remember that i tried that to with mount -t glusterfs and i was=20 getting error that glustrerfs don't understand --disable-direct-io-mode=20 (wasn't writing disable but probably was translating the command to that) . We removed gluster 3.1 and install gluster 3.0.5 from the centos rpms=20 where the parameter gave no error but we continue having problems with=20 xen and paravirtualized with tap "disks" . We installed the patched fuse=20 and didn't solved our problem. We get to the conclusion that maybe=20 problem was that the kernel on these machines was 2.6.18-194.el5xen=20 (centos 5.5). On debian machines that xen kernel was 2.6.26 was working=20 with tap, but the machines we wanted to use are dell that debian is not=20 installing. We gonna have a look for testing with other clustered file=20 system on these machines and check again with glusterfs when we are=20 going to install centos6 and make use of new glusterfs version. Thanks for your replies Kostas =CE=A3=CF=84=CE=B9=CF=82 1/12/2010 8:23 =CF=80=CE=BC, =CE=BF/=CE=B7 Raghave= ndra G =CE=AD=CE=B3=CF=81=CE=B1=CF=88=CE=B5: > Hi Kostas, > > Is --direct-io-mode=3Doff not working for you? > > regards, > Raghavendra. > ----- Original Message ----- > From: "Kakaletris Kostas"<kkakas at yahoo.gr> > To: gluster-users at gluster.org > Sent: Tuesday, November 23, 2010 3:27:39 PM > Subject: glusterfs 3.1.0 disable-io-mode > > Hello, > > I'm trying gluster 3.1.0 in conjunction with XEN on centos 5.5. > I have problem installing a vm cause installation hangs. Searched the > net and found that for xen to work in previous gluster versions thay had > to disable direct io mode. > glusterfs says that don't recognize --disable-direct-io-mode. I tried > several syntax with --diasble-direct-io-mode , direct-io-mode=3Ddisable, > direct-io-mode=3Doff , and in different positions of the mount command > (mount -t glusterfs -o<opt> ...... , mount -o<xxx> -t glusterfs > xxxx:/xxx /xxx , etc) > > Thanks in advance > Kostas > _______________________________________________ > Gluster-users mailing list > Gluster-users at gluster.org > http://gluster.org/cgi-bin/mailman/listinfo/gluster-users >
