It's CentOS 5.4 (the Rocks variant, technically). I have only tried installing the client software on one node so far, figuring that once I had it working and knew how I got to that state I could then install onto the rest. I did install all three of glusterfs-core, -rdma, -fuse RPMs on that node. .. Lana (lana.deere at gmail.com) On Tue, Oct 19, 2010 at 3:37 PM, Craig Carl <craig at gluster.com> wrote: > Lana - > ?? I wanted to make sure you had installed the glusterfs-core, rdma, and > fuse rpms if you are on CentOS, Fedora or RHEL on every client? > > Thanks. > > -- > Craig Carl > Gluster, Inc. > Cell - (408) 829-9953 (California, USA) > Gtalk - craig.carl at gmail.com > > > ________________________________ > From: "Lana Deere" <lana.deere at gmail.com> > To: gluster-users at gluster.org > Sent: Tuesday, October 19, 2010 8:59:32 AM > Subject: hanging "df" (3.1, infiniband) > > I tried to install 3.1 on some machines but I have run into trouble. > > I have 4 nodes I'm using for storage in a distributed configuration. > ?? ?# gluster volume info > > ?? ?Volume Name: RaidData > ?? ?Type: Distribute > ?? ?Status: Started > ?? ?Number of Bricks: 4 > ?? ?Transport-type: rdma > ?? ?Bricks: > ?? ?Brick1: storage0:/data > ?? ?Brick2: storage1:/data > ?? ?Brick3: storage2:/data > ?? ?Brick4: storage3:/data > > When I try to mount the volume on another machine, > ??A. If I forget to modprobe fuse first, the mount command reports no errors > ?? ? but no volume is listed in the mount table. ?(I.e., "mount -t..." seems > ?? ? to work, but "mount" doesn't show any volumes.) > ??B. If I remember to modprobe fuse first, again the mount command reports > ?? ? no errors and this time I can see the volume in the mount table. > ?? ? ? ?# mount > ?? ? ? ?/dev/sda1 on / type ext3 (rw) > ?? ? ? ?[...] > ?? ? ? ?glusterfs#storage0:/RaidData on /mnt/RaidData type fuse > (rw,allow_other,default_permissions,max_read=131072) > ?? ?However, if I do a "df" or try to "cd" to that volume, the command > hangs without > ?? ?printing any messages. > > ?? ?I wasn't sure if I needed to specify "-o transport=rdma" on the > mount command > ?? ?so I tried it both ways, but with no apparent difference. > > Anyone have suggestions for things to try? ?Do I need to have IPoIB > running on all the nodes? > > Thanks! > > > .. Lana (lana.deere at gmail.com) > _______________________________________________ > Gluster-users mailing list > Gluster-users at gluster.org > http://gluster.org/cgi-bin/mailman/listinfo/gluster-users >
