Lana - I wanted to make sure you had installed the glusterfs-core, rdma, and fuse rpms if you are on CentOS, Fedora or RHEL on every client? Thanks. -- Craig Carl Gluster, Inc. Cell - (408) 829-9953 (California, USA) Gtalk - craig.carl at gmail.com From: "Lana Deere" <lana.deere at gmail.com> To: gluster-users at gluster.org Sent: Tuesday, October 19, 2010 8:59:32 AM Subject: hanging "df" (3.1, infiniband) I tried to install 3.1 on some machines but I have run into trouble. I have 4 nodes I'm using for storage in a distributed configuration. # gluster volume info Volume Name: RaidData Type: Distribute Status: Started Number of Bricks: 4 Transport-type: rdma Bricks: Brick1: storage0:/data Brick2: storage1:/data Brick3: storage2:/data Brick4: storage3:/data When I try to mount the volume on another machine, A. If I forget to modprobe fuse first, the mount command reports no errors but no volume is listed in the mount table. (I.e., "mount -t..." seems to work, but "mount" doesn't show any volumes.) B. If I remember to modprobe fuse first, again the mount command reports no errors and this time I can see the volume in the mount table. # mount /dev/sda1 on / type ext3 (rw) [...] glusterfs#storage0:/RaidData on /mnt/RaidData type fuse (rw,allow_other,default_permissions,max_read=131072) However, if I do a "df" or try to "cd" to that volume, the command hangs without printing any messages. I wasn't sure if I needed to specify "-o transport=rdma" on the mount command so I tried it both ways, but with no apparent difference. Anyone have suggestions for things to try? Do I need to have IPoIB running on all the nodes? Thanks! .. Lana (lana.deere at gmail.com) _______________________________________________ Gluster-users mailing list Gluster-users at gluster.org http://gluster.org/cgi-bin/mailman/listinfo/gluster-users
