On Wednesday 07 October 2009 10:20:56 am Anand Avati wrote: > Benjamin, > Are the clients and servers all running the same version of > GlusterFS? Can you check by running glusterfs --version on all the > nodes involved? > > Avati > Yes. In fact they are all built from the same source packages for debian I made. You can find them at: http://www.bipolardevelopment.com/packages/ They are all 2.0.7 -- Benjamin Long > On Tue, Oct 6, 2009 at 3:36 AM, Benjamin Long > > <Benjamin.Long at longbros.com> wrote: > > Greetings All, > > > > I've been fighting with a very strange problem after following the > > instructions at: > > http://www.gluster.com/community/documentation/index.php/High- > > availability_storage_using_server-side_AFR > > > > I'm using Gluster 2.0.7 on Debian Lenny servers, and Kubuntu Karmic > > guest. Here are the symptoms: > > Start Server1 > > Start Server2 > > Mount on client at /export > > * Server1 says: > > [server-protocol.c:7065:mop_setvolume] server: accepted client from > > 10.10.3.33:1023 > > * Server2 says: > > [server-protocol.c:7065:mop_setvolume] server: accepted client from > > 10.10.3.33:1021 > > > > cd to /export > > run 'ls' > > * Server 1 says: > > [2009-10-05 17:54:54] E [server-protocol.c:5020:server_releasedir] > > server: fd - 0: unresolved fd > > * Server 2 says nothing. > > > > run 'touch testfile' > > errors with: > > touch: closing `testfile': Invalid argument > > * Client log says: > > W [fuse-bridge.c:882:fuse_err_cbk] glusterfs-fuse: 87: FLUSH() ERR => -1 > > (Invalid argument) > > W [fuse-bridge.c:882:fuse_err_cbk] glusterfs-fuse: 89: FLUSH() ERR => -1 > > (Invalid argument) > > * Server 1 says: > > E [server-protocol.c:4119:server_flush] afr: invalid argument: state->fd > > E [server-protocol.c:4119:server_flush] afr: invalid argument: state->fd > > * Server 2 says nothing > > > > > > Now, the strange thing is, I can restart EITHER server and this problem > > goes away. Note that is a restart, not a stop. The server comes back up > > and replicates as I expect it to. I do not have this issue with client > > side replication, but it's much slower. > > > > I've posted my complete config and more log details at: > > http://pastebin.ca/1595892 > > > > -- > > Benjamin Long > > _______________________________________________ > > Gluster-users mailing list > > Gluster-users at gluster.org > > http://gluster.org/cgi-bin/mailman/listinfo/gluster-users >
