Greetings All, I've been fighting with a very strange problem after following the instructions at: http://www.gluster.com/community/documentation/index.php/High- availability_storage_using_server-side_AFR I'm using Gluster 2.0.7 on Debian Lenny servers, and Kubuntu Karmic guest. Here are the symptoms: Start Server1 Start Server2 Mount on client at /export * Server1 says: [server-protocol.c:7065:mop_setvolume] server: accepted client from 10.10.3.33:1023 * Server2 says: [server-protocol.c:7065:mop_setvolume] server: accepted client from 10.10.3.33:1021 cd to /export run 'ls' * Server 1 says: [2009-10-05 17:54:54] E [server-protocol.c:5020:server_releasedir] server: fd - 0: unresolved fd * Server 2 says nothing. run 'touch testfile' errors with: touch: closing `testfile': Invalid argument * Client log says: W [fuse-bridge.c:882:fuse_err_cbk] glusterfs-fuse: 87: FLUSH() ERR => -1 (Invalid argument) W [fuse-bridge.c:882:fuse_err_cbk] glusterfs-fuse: 89: FLUSH() ERR => -1 (Invalid argument) * Server 1 says: E [server-protocol.c:4119:server_flush] afr: invalid argument: state->fd E [server-protocol.c:4119:server_flush] afr: invalid argument: state->fd * Server 2 says nothing Now, the strange thing is, I can restart EITHER server and this problem goes away. Note that is a restart, not a stop. The server comes back up and replicates as I expect it to. I do not have this issue with client side replication, but it's much slower. I've posted my complete config and more log details at: http://pastebin.ca/1595892 -- Benjamin Long
