cluster/afr not mirroring 100%?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello Jason,

This behavior is normal since with AFR files are transfered on the other nodes 
only when they are requested from them.
So in order to have the files replicated you should do find . in /home/export 
on all remote nodes.

For more information please read this article:
http://www.gluster.org/docs/index.php/Understanding_AFR_Translator

Regards
Marian

On Friday 10 October 2008 11:57:01 Jason Haar wrote:
> Hi there
>
> I've just read about Glusterfs and was impressed enough to give it a go
> - but have hit a hurdle already.
>
> I've installed glusterfs-1.3.12 on a FC9 and CentOS5 server, and am
> using it to mount bricks on each via cluster/afr.
>
> Once the clients were mounted, I started copying a directory into the
> mount point, and sure enough, it started showing up under /home/export
> on both servers (as expected). However, I then Ctrl-C'ed the "cp"
> command I was running and I did a "du /home/export" on both servers -
> and they don't match! Same fs (ext3) on both. Obviously a lot of the
> files are the same, but there are some files on one that aren't on the
> other. How could that happen?
>
> The following line showed up in /var/log/glusterfs/glusterfs.log on ONE
> of the two servers when I did the Ctr-C
>
> 2008-10-10 21:32:30 W [fuse-bridge.c:411:fuse_entry_cbk] glusterfs-fuse:
> 4176: (34) /xxxxxxx => 40111986 Rehashing because st_nlink less than
> dentry maps
>
> Any ideas? Thanks





[Index of Archives]     [Gluster Development]     [Linux Filesytems Development]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux