Hi there I've just read about Glusterfs and was impressed enough to give it a go - but have hit a hurdle already. I've installed glusterfs-1.3.12 on a FC9 and CentOS5 server, and am using it to mount bricks on each via cluster/afr. Once the clients were mounted, I started copying a directory into the mount point, and sure enough, it started showing up under /home/export on both servers (as expected). However, I then Ctrl-C'ed the "cp" command I was running and I did a "du /home/export" on both servers - and they don't match! Same fs (ext3) on both. Obviously a lot of the files are the same, but there are some files on one that aren't on the other. How could that happen? The following line showed up in /var/log/glusterfs/glusterfs.log on ONE of the two servers when I did the Ctr-C 2008-10-10 21:32:30 W [fuse-bridge.c:411:fuse_entry_cbk] glusterfs-fuse: 4176: (34) /xxxxxxx => 40111986 Rehashing because st_nlink less than dentry maps Any ideas? Thanks -- Cheers Jason Haar Information Security Manager, Trimble Navigation Ltd. Phone: +64 3 9635 377 Fax: +64 3 9635 417 PGP Fingerprint: 7A2E 0407 C9A6 CAF6 2B9F 8422 C063 5EBB FE1D 66D1
