Le jeudi 21 avril 2016 à 14:21 +0200, Michael Scherer a écrit : > Le jeudi 21 avril 2016 à 15:01 +0530, Kaushal M a écrit : > > On Thu, Apr 21, 2016 at 2:58 PM, Michael Scherer <misc@xxxxxxxxxx> wrote: > > > Le jeudi 21 avril 2016 à 14:29 +0530, Kaushal M a écrit : > > >> On Thu, Apr 21, 2016 at 1:14 PM, Michael Scherer <misc@xxxxxxxxxx> wrote: > > >> > Le jeudi 21 avril 2016 à 12:47 +0530, Kaushal M a écrit : > > >> >> I restarted Gerrit that should have fixed it for now. > > >> >> > > >> >> As this has happened several times since the migration, I thought > > >> >> something wasn't done correctly. > > >> >> Turns out the gerrit VM is a really-(really)-low end VM with just 1 > > >> >> CPU core and 2GBs of RAM!! > > >> >> > > >> >> Michael, was this intentional or did you some how overlook this? > > >> > > > >> > I likely overlooked. I reused the same type of VM than the one for > > >> > > > >> >> IIRC, > > >> >> before the migration the VM was running with a dual-core CPU at least > > >> >> and more RAM. > > >> > > > >> > 4G of ram and 2 cpus. So I propose to go to 6G and still 2 cpu for now ? > > >> > > >> Fine with me. We always have room to grow if required. > > >> > > >> > > > >> >> The hypervisor has more than enough resources to run a beefier VM. I > > >> >> was thinking of bumping the VM to a 4 Cores and 8 GB of RAM (or more). > > >> >> I'll do this if there are no objections. > > >> > > > >> > This requires a reboot however, is this ok ? > > >> > > >> Doing this shouldn't take longer that ~5minutes. We could do it any time. > > >> It would have been so much easier if libvirt allowed hot-plugging cpu > > >> and ram like disks. > > > > > > Seems to be supported in openstack, and in version we use on RHEL 7. > > > > > > And virsh has a command setvcpus with a --live switch, and the same for > > > the ram. > > > > TIL! I've been trying to do this all the time by editing the VM xml > > config. I believe virt-manager does the same as well, because it fails > > to add cpus live as well. > > so Kaushal tested and this requires a specific setup for that before. > > > > > > > Shall I try later today ? > > > (worst case, it crash and we reboot) > > > > Sure. > > So i am gonna shutdown the VM and increase ressources now. So 5 minutes > of downtime. Of course, things didn't work as planned, since the VM was for some reason still starting on the xen kernel (likely a kernel upgrade). So I did wiped all trace of xen, increased the ram, the cpu, planned for future memory/cpu upgrade if required, and things seems to go well. Until i found that gerrit was not started at boot correctly. So to be fixed later, but for now, this is working fine it seems. -- Michael Scherer Sysadmin, Community Infrastructure and Platform, OSAS
Attachment:
signature.asc
Description: This is a digitally signed message part
_______________________________________________ Gluster-devel mailing list Gluster-devel@xxxxxxxxxxx http://www.gluster.org/mailman/listinfo/gluster-devel
