Thanks for the feedback, Jonathan! I believe I've incorporated all of your suggested fixes in this version - the most notable of which is to recreate the test repo setup in each test instead of deleting branches. To save CPU cycles in setting up the test, the test suite writes the clean test setup to a directory, then copies the setup to the right location for each test. In my informal testing, this is even faster than deleting the unused branches. The range-diff for patches 3-4 have some irrelevant noise because this version is based off 'js/branch-track-inherit', but (due to a mistake when applying the 'js/branch-track-inherit' patches), v6 is based off a different 'master' commit. = Description This series implements "git branch --recurse-submodules", which is part of the submodule branching RFC (see "See also"). "git branch" (and some other features in that RFC) are incompatible with existing "--recurse-submodules" commands; patch 5 describes this incompatibility in more detail and how we plan to introduce this new functionality in a manner. This series is based off js/branch-track-inherit. Patches 1-4 are preparation for the implementation of "branch --recurse-submodules" in patch 5. Patch 6 cleans up a memory leak that I encountered on js/branch-track-inherit as I was moving code around; it isn't neeeded by "branch --recurse-submodules". See the previous cover letter (https://lore.kernel.org/git/20211220233459.45739-1-chooglen@xxxxxxxxxx) for discussions of future work. = See also Submodule branching RFC: https://lore.kernel.org/git/kl6lv912uvjv.fsf@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx/ Original Submodule UX RFC/Discussion: https://lore.kernel.org/git/YHofmWcIAidkvJiD@xxxxxxxxxx/ Contributor Summit submodules Notes: https://lore.kernel.org/git/nycvar.QRO.7.76.6.2110211148060.56@xxxxxxxxxxxxxxxxx/ Submodule UX overhaul updates: https://lore.kernel.org/git/?q=Submodule+UX+overhaul+update = Changes Changes since v6: * Move memory leak fix into its own patch (patch 6) * Eliminate unnecessary rewrapping and small style fixes * In branch --recurse-submodules tests, setup test repo anew instead of deleting the unused branches * Numerous commit message wording changes Changes since v5: * Rebase onto v7 of js/branch-track-inherit (https://lore.kernel.org/git/cover.1639717481.git.steadmon@xxxxxxxxxx) Changes since v4: * Rebase correctly onto 'gitster/seen^{/^Merge branch .js/branch-track-inherit.}' (see base-commit) as suggested in [1] (thanks Junio!) * These patches were also verified on top of 'next'. Changes since v3: * Split up the old patch 1. Patch 1 had a big diff because it used to move lines, remove dead code and introduce repo_* functions (thanks Jonathan!) ** repo_* functions have been dropped; they added noise and are not necessary for correctness. * Use a new, harder-to-misuse function in --set-upstream-to, dwim_and_setup_tracking(). Now, setup_tracking() never does DWIM and dwim_and_setup_tracking() always does DWIM. * Move create_branch() dry_run to its own patch. * Fix an oversight where submodules in subtrees were ignored. This was because submodules_of_tree() and tree_entry() didn't recurse into subtrees. Test this accordingly (thanks Jonathan!). * cmd_branch() possible actions are more consistently ordered. * Documentation fixes (thanks Philippe!). * Additional comments and explanation. * Drop patch 5 (optional cleanup). * Rebase onto js/branch-track-inherit v6. Changes since v2: * Rebase onto js/branch-track-inherit. This series should continue to be the case going forward. * Patch 1 has a smaller diff because the introduction of validate_branch_start() no longer changes the function order thanks to a forward declaration. This artificial forward declaration is removed in a patch 2 (which can just be squashed into patch 1). * Optional cleanup: fix questionable exit codes in patch 5. Changes since v1: * Move the functionality of "git branch --dry-run" into "git submodule-helper create-branch --dry-run" * Add more fields to the submodules_of_tree() struct to reduce the number of allocations made by the caller. Move this functionality to patch 3 (formerly patch 4) and drop patch 1. * Make submodules_of_tree() ignore inactive submodules * Structure the output of the submodules a bit better by adding prefixes to the child process' output (instead of inconsistently indenting the output). ** I wasn't able to find a good way to interleave stdout/stderr correctly, so a less-than-desirable workaround was to route the child process output to stdout/stderr depending on the exit code. ** Eventually, I would like to structure the output of submodules in a report, as Ævar suggested. But at this stage, I think that it's better to spend time getting user feedback on the submodules branching UX and it'll be easier to standardize the output when we've implemented more of the UX :) [1] https://lore.kernel.org/git/xmqqlf0lz6os.fsf@gitster.g Glen Choo (6): branch: move --set-upstream-to behavior to dwim_and_setup_tracking() branch: make create_branch() always create a branch branch: add a dry_run parameter to create_branch() builtin/branch: consolidate action-picking logic in cmd_branch() branch: add --recurse-submodules option for branch creation branch.c: use 'goto cleanup' in setup_tracking() to fix memory leaks Documentation/config/advice.txt | 3 + Documentation/config/submodule.txt | 37 ++-- Documentation/git-branch.txt | 11 +- advice.c | 1 + advice.h | 1 + branch.c | 271 ++++++++++++++++++++++----- branch.h | 53 +++++- builtin/branch.c | 70 +++++-- builtin/checkout.c | 3 +- builtin/submodule--helper.c | 38 ++++ submodule-config.c | 60 ++++++ submodule-config.h | 34 ++++ submodule.c | 11 +- submodule.h | 3 + t/t3200-branch.sh | 17 ++ t/t3207-branch-submodule.sh | 282 +++++++++++++++++++++++++++++ 16 files changed, 815 insertions(+), 80 deletions(-) create mode 100755 t/t3207-branch-submodule.sh Range-diff against v6: 1: 29669c57b4 ! 1: 206175cfb3 branch: move --set-upstream-to behavior to dwim_and_setup_tracking() @@ Metadata ## Commit message ## branch: move --set-upstream-to behavior to dwim_and_setup_tracking() - This refactor is motivated by a desire to add a "dry_run" parameter to - create_branch() that will validate whether or not a branch can be - created without actually creating it - this behavior will be used in a - subsequent commit that adds `git branch --recurse-submodules topic`. + This commit is preparation for a future commit that will simplify + create_branch() so that it always creates a branch. This will allow + create_branch() to accept a dry_run parameter (which is needed for "git + branch --recurse-submodules"). - Adding "dry_run" is not obvious because create_branch() is also used to - set tracking information without creating a branch, i.e. when using - --set-upstream-to. This appears to be a leftover from 4fc5006676 (Add - branch --set-upstream, 2010-01-18), when --set-upstream would sometimes - create a branch and sometimes update tracking information without - creating a branch. However, we no longer support --set-upstream, so it - makes more sense to set tracking information with another function and - use create_branch() only to create branches. In a later commit, we will - remove the now-unnecessary logic from create_branch() so that "dry_run" - becomes trivial to implement. + create_branch() used to always create a branch, but 4fc5006676 (Add + branch --set-upstream, 2010-01-18) changed it to also be able to set + tracking information without creating a branch. - Introduce dwim_and_setup_tracking(), which replaces create_branch() - in `git branch --set-upstream-to`. Ensure correctness by moving the DWIM - and branch validation logic from create_branch() into a helper function, - dwim_branch_start(), so that the logic is shared by both functions. + Refactor the code that sets tracking information into its own functions + dwim_branch_start() and dwim_and_setup_tracking(). Also change an + invocation of create_branch() in cmd_branch() in builtin/branch.c to use + dwim_and_setup_tracking(), since that invocation is only for setting + tracking information (in "git branch --set-upstream-to"). + As of this commit, create_branch() is no longer invoked in a way that + does not create branches. + + Helped-by: Jonathan Tan <jonathantanmy@xxxxxxxxxx> Signed-off-by: Glen Choo <chooglen@xxxxxxxxxx> ## branch.c ## @@ branch.c: static int inherit_tracking(struct tracking *tracking, const char *ori */ static void setup_tracking(const char *new_ref, const char *orig_ref, enum branch_track track, int quiet) -@@ branch.c: static void setup_tracking(const char *new_ref, const char *orig_ref, - case BRANCH_TRACK_INHERIT: - break; - default: -- return; -+ goto cleanup; - } - - if (tracking.matches > 1) -@@ branch.c: static void setup_tracking(const char *new_ref, const char *orig_ref, - tracking.remote, tracking.srcs) < 0) - exit(-1); - -+cleanup: - string_list_clear(tracking.srcs, 0); - } - @@ branch.c: N_("\n" "will track its remote counterpart, you may want to use\n" "\"git push -u\" to set the upstream config as you push."); @@ branch.c: void create_branch(struct repository *r, if ((commit = lookup_commit_reference(r, &oid)) == NULL) die(_("Not a valid branch point: '%s'."), start_name); - oidcpy(&oid, &commit->object.oid); -+ if (out_real_ref) -+ *out_real_ref = real_ref ? xstrdup(real_ref) : NULL; ++ if (out_real_ref) { ++ *out_real_ref = real_ref; ++ real_ref = NULL; ++ } + if (out_oid) + oidcpy(out_oid, &commit->object.oid); + + FREE_AND_NULL(real_ref); +} + -+void create_branch(struct repository *r, const char *name, -+ const char *start_name, int force, int clobber_head_ok, -+ int reflog, int quiet, enum branch_track track) ++void create_branch(struct repository *r, ++ const char *name, const char *start_name, ++ int force, int clobber_head_ok, int reflog, ++ int quiet, enum branch_track track) +{ + struct object_id oid; + char *real_ref; 2: ac2532a953 ! 2: 2e02885eb3 branch: make create_branch() always create a branch @@ Metadata ## Commit message ## branch: make create_branch() always create a branch - create_branch() was formerly used to set tracking without creating a - branch. Since the previous commit replaces this use case with - dwim_and_setup_tracking(), we can simplify create_branch() so that it - always creates a branch. + With the previous commit, there are no more invocations of + create_branch() that do not create a branch because: - Do this simplification, in particular: + * BRANCH_TRACK_OVERRIDE is no longer passed + * clobber_head_ok = true and force = false is never passed - * remove the special handling of BRANCH_TRACK_OVERRIDE because it is no - longer used - * assert that clobber_head_ok can only be provided with force - * check that we're handling clobber_head_ok and force correctly by - introducing tests for `git branch --force` + Assert these situations, delete dead code and ensure that we're handling + clobber_head_ok and force correctly by introducing tests for `git branch + --force`. As a result, create_branch() now always creates a branch. + Helped-by: Jonathan Tan <jonathantanmy@xxxxxxxxxx> Signed-off-by: Glen Choo <chooglen@xxxxxxxxxx> ## branch.c ## -@@ branch.c: void create_branch(struct repository *r, const char *name, +@@ branch.c: void create_branch(struct repository *r, char *real_ref; struct strbuf ref = STRBUF_INIT; int forcing = 0; @@ branch.c: void create_branch(struct repository *r, const char *name, + struct strbuf err = STRBUF_INIT; + char *msg; + ++ if (track == BRANCH_TRACK_OVERRIDE) ++ BUG("'track' cannot be BRANCH_TRACK_OVERRIDE. Did you mean to call dwim_and_setup_tracking()?"); + if (clobber_head_ok && !force) + BUG("'clobber_head_ok' can only be used with 'force'"); + @@ branch.c: void create_branch(struct repository *r, const char *name, } dwim_branch_start(r, start_name, track, &real_ref, &oid); -@@ branch.c: void create_branch(struct repository *r, const char *name, +@@ branch.c: void create_branch(struct repository *r, if (reflog) log_all_ref_updates = LOG_REFS_NORMAL; 3: a0ed3fa438 ! 3: cd43a9aaaa branch: add a dry_run parameter to create_branch() @@ Commit message ## branch.c ## @@ branch.c: static void dwim_branch_start(struct repository *r, const char *start_name, - - void create_branch(struct repository *r, const char *name, - const char *start_name, int force, int clobber_head_ok, -- int reflog, int quiet, enum branch_track track) -+ int reflog, int quiet, enum branch_track track, int dry_run) + void create_branch(struct repository *r, + const char *name, const char *start_name, + int force, int clobber_head_ok, int reflog, +- int quiet, enum branch_track track) ++ int quiet, enum branch_track track, int dry_run) { struct object_id oid; char *real_ref; -@@ branch.c: void create_branch(struct repository *r, const char *name, +@@ branch.c: void create_branch(struct repository *r, } dwim_branch_start(r, start_name, track, &real_ref, &oid); @@ branch.c: void create_branch(struct repository *r, const char *name, if (reflog) log_all_ref_updates = LOG_REFS_NORMAL; -@@ branch.c: void create_branch(struct repository *r, const char *name, +@@ branch.c: void create_branch(struct repository *r, if (real_ref && track) setup_tracking(ref.buf + 11, real_ref, track, quiet); @@ branch.h: void dwim_and_setup_tracking(struct repository *r, const char *new_ref + * - dry_run causes the branch to be validated but not created. + * */ --void create_branch(struct repository *r, -- const char *name, const char *start_name, -- int force, int clobber_head_ok, + void create_branch(struct repository *r, + const char *name, const char *start_name, + int force, int clobber_head_ok, - int reflog, int quiet, enum branch_track track); -+void create_branch(struct repository *r, const char *name, -+ const char *start_name, int force, int clobber_head_ok, -+ int reflog, int quiet, enum branch_track track, int dry_run); ++ int reflog, int quiet, enum branch_track track, ++ int dry_run); /* * Check if 'name' can be a valid name for a branch; die otherwise. @@ builtin/checkout.c: static void update_refs_for_switch(const struct checkout_opt - opts->track); + opts->track, + 0); - free(new_branch_info->name); - free(new_branch_info->refname); - new_branch_info->name = xstrdup(opts->new_branch); + new_branch_info->name = opts->new_branch; + setup_branch_path(new_branch_info); + } 4: ebded31c96 ! 4: 8e5f750162 builtin/branch: clean up action-picking logic in cmd_branch() @@ Metadata Author: Glen Choo <chooglen@xxxxxxxxxx> ## Commit message ## - builtin/branch: clean up action-picking logic in cmd_branch() + builtin/branch: consolidate action-picking logic in cmd_branch() - Add a variable to cmd_branch() that will tell us whether or not - cmd_branch() will default to creating a branch (instead of performing - another action). Besides making the function more explicit, this allows - us to validate options that can only be used when creating a branch. - Such an option does not exist yet, but one will be introduced in a - subsequent commit. + Consolidate the logic for deciding when to create a new branch in + cmd_branch(), and save the result for reuse. Besides making the function + more explicit, this allows us to validate options that can only be used + when creating a branch. Such an option does not exist yet, but one will + be introduced in a subsequent commit. + Helped-by: Jonathan Tan <jonathantanmy@xxxxxxxxxx> Signed-off-by: Glen Choo <chooglen@xxxxxxxxxx> ## builtin/branch.c ## @@ builtin/branch.c: static int edit_branch_description(const char *branch_name) enum branch_track track; struct ref_filter filter; - int icase = 0; - static struct ref_sorting *sorting; - struct string_list sorting_options = STRING_LIST_INIT_DUP; + static struct ref_sorting *sorting = NULL, **sorting_tail = &sorting; struct ref_format format = REF_FORMAT_INIT; + @@ builtin/branch.c: int cmd_branch(int argc, const char **argv, const char *prefix) filter.reachable_from || filter.unreachable_from || filter.points_at.nr) list = 1; 5: 0a7ec6ee75 ! 5: c59de1fd9c branch: add --recurse-submodules option for branch creation @@ Commit message branch: add --recurse-submodules option for branch creation To improve the submodules UX, we would like to teach Git to handle - branches in submodules. Start this process by teaching `git branch` the - --recurse-submodules option so that `git branch --recurse-submodules - topic` will create the "topic" branch in the superproject and its + branches in submodules. Start this process by teaching "git branch" the + --recurse-submodules option so that "git branch --recurse-submodules + topic" will create the `topic` branch in the superproject and its submodules. Although this commit does not introduce breaking changes, it is - incompatible with existing --recurse-submodules semantics e.g. `git - checkout` does not recursively checkout the expected branches created by - `git branch` yet. To ensure that the correct set of semantics is used, - this commit introduces a new configuration value, - `submodule.propagateBranches`, which enables submodule branching when - true (defaults to false). + incompatible with existing --recurse-submodules commands because "git + branch --recurse-submodules" writes to the submodule ref store, but most + commands only consider the superproject gitlink and ignore the submodule + ref store. For example, "git checkout --recurse-submodules" will check + out the commits in the superproject gitlinks (and put the submodules in + detached HEAD) instead of checking out the submodule branches. - This commit includes changes that allow Git to work with submodules - that are in trees (and not just the index): + Because of this, this commit introduces a new configuration value, + `submodule.propagateBranches`. The plan is for Git commands to + prioritize submodule ref store information over superproject gitlinks if + this value is true. Because "git branch --recurse-submodules" writes to + submodule ref stores, for the sake of clarity, it will not function + unless this configuration value is set. + + This commit also includes changes that support working with submodules + from a superproject commit because "branch --recurse-submodules" (and + future commands) need to read .gitmodules and gitlinks from the + superproject commit, but submodules are typically read from the + filesystem's .gitmodules and the index's gitlinks. These changes are: * add a submodules_of_tree() helper that gives the relevant information of an in-tree submodule (e.g. path and oid) and @@ Commit message incorrect since its inception, a8dfd5eac4 (Make builtin-branch.c use parse_options., 2007-10-07). + Helped-by: Jonathan Tan <jonathantanmy@xxxxxxxxxx> Signed-off-by: Glen Choo <chooglen@xxxxxxxxxx> ## Documentation/config/advice.txt ## @@ Documentation/config/submodule.txt: submodule.active:: - Applies to all commands that support this option - (`checkout`, `fetch`, `grep`, `pull`, `push`, `read-tree`, `reset`, - `restore` and `switch`) except `clone` and `ls-files`. -- Defaults to false. + option by default. Defaults to false. -+ + - When set to true, it can be deactivated via the - `--no-recurse-submodules` option. Note that some Git commands - lacking this option may call some of the above commands affected by -@@ Documentation/config/submodule.txt: submodule.recurse:: - `git fetch` but does not have a `--no-recurse-submodules` option. - For these commands a workaround is to temporarily change the - configuration value by using `git -c submodule.recurse=0`. -+ + -+ The following list shows the commands that accept -+ `--recurse-submodules` and whether they are supported by this -+ setting. -+ * `checkout`, `fetch`, `grep`, `pull`, `push`, `read-tree`, -+ `reset`, `restore` and `switch` are always supported. -+ * `clone` and `ls-files` are not supported. -+ * `branch` is supported only if `submodule.propagateBranches` is -+ enabled +++ ++When set to true, it can be deactivated via the ++`--no-recurse-submodules` option. Note that some Git commands ++lacking this option may call some of the above commands affected by ++`submodule.recurse`; for instance `git remote update` will call ++`git fetch` but does not have a `--no-recurse-submodules` option. ++For these commands a workaround is to temporarily change the ++configuration value by using `git -c submodule.recurse=0`. +++ ++The following list shows the commands that accept ++`--recurse-submodules` and whether they are supported by this ++setting. ++ ++* `checkout`, `fetch`, `grep`, `pull`, `push`, `read-tree`, ++`reset`, `restore` and `switch` are always supported. ++* `clone` and `ls-files` are not supported. ++* `branch` is supported only if `submodule.propagateBranches` is ++enabled + +submodule.propagateBranches:: + [EXPERIMENTAL] A boolean that enables branching support when @@ Documentation/config/submodule.txt: submodule.recurse:: + Enabling this will allow certain commands to accept + `--recurse-submodules` and certain commands that already accept + `--recurse-submodules` will now consider branches. -+ Defaults to false. + Defaults to false. +- When set to true, it can be deactivated via the +- `--no-recurse-submodules` option. Note that some Git commands +- lacking this option may call some of the above commands affected by +- `submodule.recurse`; for instance `git remote update` will call +- `git fetch` but does not have a `--no-recurse-submodules` option. +- For these commands a workaround is to temporarily change the +- configuration value by using `git -c submodule.recurse=0`. submodule.fetchJobs:: Specifies how many submodules are fetched/cloned at the same time. @@ branch.c: void dwim_and_setup_tracking(struct repository *r, const char *new_ref +/** + * Creates a branch in a submodule by calling + * create_branches_recursively() in a child process. The child process -+ * is necessary because install_branch_config() (and its variants) do -+ * not support writing configs to submodules. ++ * is necessary because install_branch_config_multiple_remotes() (which ++ * is called by setup_tracking()) does not support writing configs to ++ * submodules. + */ +static int submodule_create_branch(struct repository *r, + const struct submodule *submodule, @@ branch.c: void dwim_and_setup_tracking(struct repository *r, const char *new_ref + child.stdout_to_stderr = 1; + + prepare_other_repo_env(&child.env_array, r->gitdir); ++ /* ++ * submodule_create_branch() is indirectly invoked by "git ++ * branch", but we cannot invoke "git branch" in the child ++ * process because it does not let us set start_name and ++ * start_oid separately (see create_branches_recursively()). ++ */ + strvec_pushl(&child.args, "submodule--helper", "create-branch", NULL); + if (dry_run) + strvec_push(&child.args, "--dry-run"); @@ branch.c: void dwim_and_setup_tracking(struct repository *r, const char *new_ref unlink(git_path_merge_head(r)); ## branch.h ## -@@ branch.h: void create_branch(struct repository *r, const char *name, - const char *start_name, int force, int clobber_head_ok, - int reflog, int quiet, enum branch_track track, int dry_run); +@@ branch.h: void create_branch(struct repository *r, + int reflog, int quiet, enum branch_track track, + int dry_run); +/* + * Creates a new branch in repository and its submodules (and its @@ builtin/branch.c: int cmd_branch(int argc, const char **argv, const char *prefix + recurse_submodules_explicit = 0; enum branch_track track; struct ref_filter filter; - static struct ref_sorting *sorting; + static struct ref_sorting *sorting = NULL, **sorting_tail = &sorting; @@ builtin/branch.c: int cmd_branch(int argc, const char **argv, const char *prefix) OPT_CALLBACK(0, "points-at", &filter.points_at, N_("object"), N_("print only branches of the object"), parse_opt_object_name), @@ t/t3207-branch-submodule.sh (new) +. ./test-lib.sh +. "$TEST_DIRECTORY"/lib-rebase.sh + -+test_expect_success 'setup superproject and submodule' ' -+ git init super && -+ test_commit foo && -+ git init sub-sub-upstream && -+ test_commit -C sub-sub-upstream foo && -+ git init sub-upstream && -+ # Submodule in a submodule -+ git -C sub-upstream submodule add "$TRASH_DIRECTORY/sub-sub-upstream" sub-sub && -+ git -C sub-upstream commit -m "add submodule" && -+ # Regular submodule -+ git -C super submodule add "$TRASH_DIRECTORY/sub-upstream" sub && -+ # Submodule in a subdirectory -+ git -C super submodule add "$TRASH_DIRECTORY/sub-sub-upstream" second/sub && -+ git -C super commit -m "add submodule" && -+ git -C super config submodule.propagateBranches true && -+ git -C super/sub submodule update --init -+' -+ -+CLEANUP_SCRIPT_PATH="$TRASH_DIRECTORY/cleanup_branches.sh" ++pwd=$(pwd) + -+cat >"$CLEANUP_SCRIPT_PATH" <<'EOF' -+ #!/bin/sh ++# Creates a clean test environment in "pwd" by copying the repo setup ++# from test_dirs. ++reset_test () { ++ rm -fr super && ++ rm -fr sub-sub-upstream && ++ rm -fr sub-upstream && ++ cp -r test_dirs/* . ++} + -+ super_dir="$1" -+ shift ++test_expect_success 'setup superproject and submodule' ' ++ mkdir test_dirs && + ( -+ cd "$super_dir" && -+ git checkout main && -+ for branch_name in "$@"; do -+ git branch -D "$branch_name" -+ git submodule foreach "$TRASH_DIRECTORY/cleanup_branches.sh . $branch_name || true" -+ done -+ ) -+EOF -+chmod +x "$CLEANUP_SCRIPT_PATH" -+ -+cleanup_branches() { -+ TRASH_DIRECTORY="\"$TRASH_DIRECTORY\"" "$CLEANUP_SCRIPT_PATH" "$@" -+} >/dev/null 2>/dev/null ++ cd test_dirs && ++ git init super && ++ test_commit -C super foo && ++ git init sub-sub-upstream && ++ test_commit -C sub-sub-upstream foo && ++ git init sub-upstream && ++ # Submodule in a submodule ++ git -C sub-upstream submodule add "${pwd}/test_dirs/sub-sub-upstream" sub-sub && ++ git -C sub-upstream commit -m "add submodule" && ++ # Regular submodule ++ git -C super submodule add "${pwd}/test_dirs/sub-upstream" sub && ++ # Submodule in a subdirectory ++ git -C super submodule add "${pwd}/test_dirs/sub-sub-upstream" second/sub && ++ git -C super commit -m "add submodule" && ++ git -C super config submodule.propagateBranches true && ++ git -C super/sub submodule update --init ++ ) && ++ reset_test ++' + +# Test the argument parsing +test_expect_success '--recurse-submodules should create branches' ' -+ test_when_finished "cleanup_branches super branch-a" && ++ test_when_finished "reset_test" && + ( + cd super && + git branch --recurse-submodules branch-a && @@ t/t3207-branch-submodule.sh (new) +' + +test_expect_success '--recurse-submodules should die if submodule.propagateBranches is false' ' -+ test_when_finished "cleanup_branches super branch-a" && ++ test_when_finished "reset_test" && + ( + cd super && + echo "fatal: branch with --recurse-submodules can only be used if submodule.propagateBranches is enabled" >expected && @@ t/t3207-branch-submodule.sh (new) +' + +test_expect_success '--recurse-submodules should fail when not creating branches' ' -+ test_when_finished "cleanup_branches super branch-a" && ++ test_when_finished "reset_test" && + ( + cd super && + git branch --recurse-submodules branch-a && + test_must_fail git branch --recurse-submodules -D branch-a && + # Assert that the branches were not deleted -+ git rev-parse --abbrev-ref branch-a && -+ git -C sub rev-parse --abbrev-ref branch-a ++ git rev-parse branch-a && ++ git -C sub rev-parse branch-a + ) +' + +test_expect_success 'should respect submodule.recurse when creating branches' ' -+ test_when_finished "cleanup_branches super branch-a" && ++ test_when_finished "reset_test" && + ( + cd super && + git -c submodule.recurse=true branch branch-a && -+ git rev-parse --abbrev-ref branch-a && -+ git -C sub rev-parse --abbrev-ref branch-a ++ git rev-parse branch-a && ++ git -C sub rev-parse branch-a + ) +' + +test_expect_success 'should ignore submodule.recurse when not creating branches' ' -+ test_when_finished "cleanup_branches super branch-a" && ++ test_when_finished "reset_test" && + ( + cd super && + git branch --recurse-submodules branch-a && + git -c submodule.recurse=true branch -D branch-a && -+ test_must_fail git rev-parse --abbrev-ref branch-a && -+ git -C sub rev-parse --abbrev-ref branch-a ++ test_must_fail git rev-parse branch-a && ++ git -C sub rev-parse branch-a + ) +' + +# Test branch creation behavior +test_expect_success 'should create branches based off commit id in superproject' ' -+ test_when_finished "cleanup_branches super branch-a branch-b" && ++ test_when_finished "reset_test" && + ( + cd super && + git branch --recurse-submodules branch-a && @@ t/t3207-branch-submodule.sh (new) +' + +test_expect_success 'should not create any branches if branch is not valid for all repos' ' -+ test_when_finished "cleanup_branches super branch-a" && ++ test_when_finished "reset_test" && + ( + cd super && + git -C sub branch branch-a && + test_must_fail git branch --recurse-submodules branch-a 2>actual && + test_must_fail git rev-parse branch-a && -+ -+ cat >expected <<-EOF && -+ submodule ${SQ}sub${SQ}: fatal: A branch named ${SQ}branch-a${SQ} already exists. -+ fatal: submodule ${SQ}sub${SQ}: cannot create branch ${SQ}branch-a${SQ} -+ EOF -+ test_cmp expected actual ++ grep "submodule .sub.: fatal: A branch named .branch-a. already exists" actual + ) +' + +test_expect_success 'should create branches if branch exists and --force is given' ' -+ test_when_finished "cleanup_branches super branch-a" && ++ test_when_finished "reset_test" && + ( + cd super && + git -C sub rev-parse HEAD >expected && + test_commit -C sub baz && -+ git -C sub branch branch-a HEAD~1 && ++ # branch-a in sub now points to a newer commit. ++ git -C sub branch branch-a HEAD && ++ git -C sub rev-parse branch-a >actual-old-branch-a && + git branch --recurse-submodules --force branch-a && + git rev-parse branch-a && -+ # assert that sub:branch-a was moved -+ git -C sub rev-parse branch-a >actual && -+ test_cmp expected actual ++ git -C sub rev-parse branch-a >actual-new-branch-a && ++ test_cmp expected actual-new-branch-a && ++ # assert that branch --force actually moved the sub ++ # branch ++ ! test_cmp expected actual-old-branch-a + ) +' + +test_expect_success 'should create branch when submodule is not in HEAD:.gitmodules' ' -+ test_when_finished "cleanup_branches super branch-a branch-b branch-c" && ++ test_when_finished "reset_test" && + ( + cd super && + git branch branch-a && @@ t/t3207-branch-submodule.sh (new) + git commit -m "add second submodule" && + git checkout branch-a && + git branch --recurse-submodules branch-c branch-b && -+ git rev-parse branch-c && -+ git -C sub rev-parse branch-c && -+ git -C second/sub rev-parse branch-c && + git checkout --recurse-submodules branch-c && + git -C sub2 rev-parse branch-c && + git -C sub2/sub-sub rev-parse branch-c + ) +' + ++test_expect_success 'should not create branches in inactive submodules' ' ++ test_when_finished "reset_test" && ++ test_config -C super submodule.sub.active false && ++ ( ++ cd super && ++ git branch --recurse-submodules branch-a && ++ git rev-parse branch-a && ++ test_must_fail git -C sub branch-a ++ ) ++' ++ +test_expect_success 'should set up tracking of local branches with track=always' ' -+ test_when_finished "cleanup_branches super branch-a" && ++ test_when_finished "reset_test" && + ( + cd super && + git -c branch.autoSetupMerge=always branch --recurse-submodules branch-a main && @@ t/t3207-branch-submodule.sh (new) +' + +test_expect_success 'should set up tracking of local branches with explicit track' ' -+ test_when_finished "cleanup_branches super branch-a" && ++ test_when_finished "reset_test" && + ( + cd super && + git branch --track --recurse-submodules branch-a main && @@ t/t3207-branch-submodule.sh (new) +' + +test_expect_success 'should not set up unnecessary tracking of local branches' ' -+ test_when_finished "cleanup_branches super branch-a" && ++ test_when_finished "reset_test" && + ( + cd super && + git branch --recurse-submodules branch-a main && @@ t/t3207-branch-submodule.sh (new) + ) +' + -+test_expect_success 'should not create branches in inactive submodules' ' -+ test_when_finished "cleanup_branches super branch-a" && -+ test_config -C super submodule.sub.active false && -+ ( -+ cd super && -+ git branch --recurse-submodules branch-a && -+ git rev-parse branch-a && -+ test_must_fail git -C sub branch-a -+ ) -+' ++reset_remote_test () { ++ rm -fr super-clone && ++ reset_test ++} + -+test_expect_success 'setup remote-tracking tests' ' ++test_expect_success 'setup tests with remotes' ' + ( -+ cd super && -+ git branch branch-a && -+ git checkout -b branch-b && -+ git submodule add ../sub-upstream sub2 && -+ # branch-b now has a committed submodule not in branch-a -+ git commit -m "add second submodule" ++ cd test_dirs && ++ ( ++ cd super && ++ git branch branch-a && ++ git checkout -b branch-b && ++ git submodule add ../sub-upstream sub2 && ++ # branch-b now has a committed submodule not in branch-a ++ git commit -m "add second submodule" ++ ) && ++ git clone --branch main --recurse-submodules super super-clone && ++ git -C super-clone config submodule.propagateBranches true + ) && -+ git clone --branch main --recurse-submodules super super-clone && -+ git -C super-clone config submodule.propagateBranches true ++ reset_remote_test +' + -+test_expect_success 'should not create branch when submodule is not in .git/modules' ' -+ # The cleanup needs to delete sub2 separately because main does not have sub2 -+ test_when_finished "git -C super-clone/sub2 branch -D branch-b && \ -+ git -C super-clone/sub2/sub-sub branch -D branch-b && \ -+ cleanup_branches super-clone branch-a branch-b" && ++test_expect_success 'should get fatal error upon branch creation when submodule is not in .git/modules' ' ++ test_when_finished "reset_remote_test" && + ( + cd super-clone && -+ # This should succeed because super-clone has sub. ++ # This should succeed because super-clone has sub in .git/modules + git branch --recurse-submodules branch-a origin/branch-a && -+ # This should fail because super-clone does not have sub2. ++ # This should fail because super-clone does not have sub2 .git/modules + test_must_fail git branch --recurse-submodules branch-b origin/branch-b 2>actual && -+ cat >expected <<-EOF && -+ hint: You may try updating the submodules using ${SQ}git checkout origin/branch-b && git submodule update --init${SQ} -+ fatal: submodule ${SQ}sub2${SQ}: unable to find submodule -+ EOF -+ test_cmp expected actual && ++ grep "fatal: submodule .sub2.: unable to find submodule" actual && + test_must_fail git rev-parse branch-b && + test_must_fail git -C sub rev-parse branch-b && + # User can fix themselves by initializing the submodule @@ t/t3207-branch-submodule.sh (new) +' + +test_expect_success 'should set up tracking of remote-tracking branches' ' -+ test_when_finished "cleanup_branches super-clone branch-a" && ++ test_when_finished "reset_remote_test" && + ( + cd super-clone && + git branch --recurse-submodules branch-a origin/branch-a && @@ t/t3207-branch-submodule.sh (new) +' + +test_expect_success 'should not fail when unable to set up tracking in submodule' ' -+ test_when_finished "cleanup_branches super-clone branch-a && \ -+ git -C super-clone remote rename ex-origin origin" && ++ test_when_finished "reset_remote_test" && + ( + cd super-clone && + git remote rename origin ex-origin && -: ---------- > 6: a4634f0493 branch.c: use 'goto cleanup' in setup_tracking() to fix memory leaks base-commit: 44f14a9d24cd9f04a0a789e58968d52d44d7f332 -- 2.33.GIT
