Here's a re-roll of just the first patch of this series, since that was
the one that got all the comments (and the others are textually
independent).
The changes are:
- drop the leftover in_dir assignment
- replace ${indir:+} magic with defaulting indir=. (so we always pass
it to "-C"
- replace eval formatting magic with "%s" printf formatters (safer and
gets rid of quoting issues in the callers).
- use a tempfile to avoid significant logic on the left-hand subshell
of a pipe. This actually _doesn't_ save a process because we end up
having to call "rm" to get rid of the tempfile. But I think it makes
the logic easier to follow (we can get just call test_tick as normal
in our loop), and as a bonus it leaves something you can inspect if
the fast-import fails.
- I dropped the comparison to test_commit in the documentation, since
it isn't a direct replacement due to the lack of tag creation. I
think that makes it clear enough.
I _didn't_ move the documentation out to t/README. IMHO we should be
moving in the opposite direction. But either way, I think it's
something we should handle separately (either consistently moving it
all into t/README, or moving it closer to the definitions).
I didn't re-run all of the timings, but I spot-checked a few and got
similar improvements (weirdly all of my timings, both before and after,
seem slightly faster today; apparently gremlins were slowing my machine
down yesterday?).
-- >8 --
Subject: test-lib: introduce test_commit_bulk
Some tests need to create a string of commits. Doing this with
test_commit is very heavy-weight, as it needs at least one process per
commit (and in fact, uses several).
For bulk creation, we can do much better by using fast-import, but it's
often a pain to generate the input. Let's provide a helper to do so.
We'll use t5310 as a guinea pig, as it has three 10-commit loops. Here
are hyperfine results before and after:
[before]
Benchmark #1: ./t5310-pack-bitmaps.sh --root=/var/ram/git-tests
Time (mean ± σ): 2.846 s ± 0.305 s [User: 3.042 s, System: 0.919 s]
Range (min … max): 2.250 s … 3.210 s 10 runs
[after]
Benchmark #1: ./t5310-pack-bitmaps.sh --root=/var/ram/git-tests
Time (mean ± σ): 2.210 s ± 0.174 s [User: 2.570 s, System: 0.604 s]
Range (min … max): 1.999 s … 2.590 s 10 runs
So we're over 20% faster, while making the callers slightly shorter. We
added a lot more lines in test-lib-function.sh, of course, and the
helper is way more featureful than we need here. But my hope is that it
will be flexible enough to use in more places.
Signed-off-by: Jeff King <peff@xxxxxxxx>
---
t/t5310-pack-bitmaps.sh | 15 +----
t/test-lib-functions.sh | 123 ++++++++++++++++++++++++++++++++++++++++
2 files changed, 126 insertions(+), 12 deletions(-)
diff --git a/t/t5310-pack-bitmaps.sh b/t/t5310-pack-bitmaps.sh
index a26c8ba9a2..3aab7024ca 100755
--- a/t/t5310-pack-bitmaps.sh
+++ b/t/t5310-pack-bitmaps.sh
@@ -21,15 +21,9 @@ has_any () {
}
test_expect_success 'setup repo with moderate-sized history' '
- for i in $(test_seq 1 10)
- do
- test_commit $i
- done &&
+ test_commit_bulk --id=file 10 &&
git checkout -b other HEAD~5 &&
- for i in $(test_seq 1 10)
- do
- test_commit side-$i
- done &&
+ test_commit_bulk --id=side 10 &&
git checkout master &&
bitmaptip=$(git rev-parse master) &&
blob=$(echo tagged-blob | git hash-object -w --stdin) &&
@@ -106,10 +100,7 @@ test_expect_success 'clone from bitmapped repository' '
'
test_expect_success 'setup further non-bitmapped commits' '
- for i in $(test_seq 1 10)
- do
- test_commit further-$i
- done
+ test_commit_bulk --id=further 10
'
rev_list_tests 'partial bitmap'
diff --git a/t/test-lib-functions.sh b/t/test-lib-functions.sh
index 0367cec5fd..9fd0fa2a89 100644
--- a/t/test-lib-functions.sh
+++ b/t/test-lib-functions.sh
@@ -233,6 +233,129 @@ test_merge () {
git tag "$1"
}
+# Efficiently create <nr> commits, each with a unique number (from 1 to <nr>
+# by default) in the commit message.
+#
+# Usage: test_commit_bulk [options] <nr>
+# -C <dir>:
+# Run all git commands in directory <dir>
+# --ref=<n>:
+# ref on which to create commits (default: HEAD)
+# --start=<n>:
+# number commit messages from <n> (default: 1)
+# --message=<msg>:
+# use <msg> as the commit mesasge (default: "commit %s")
+# --filename=<fn>:
+# modify <fn> in each commit (default: %s.t)
+# --contents=<string>:
+# place <string> in each file (default: "content %s")
+# --id=<string>:
+# shorthand to use <string> and %s in message, filename, and contents
+#
+# The message, filename, and contents strings are evaluated by printf, with the
+# first "%s" replaced by the current commit number. So you can do:
+#
+# test_commit_bulk --filename=file --contents="modification %s"
+#
+# to have every commit touch the same file, but with unique content.
+#
+test_commit_bulk () {
+ tmpfile=.bulk-commit.input
+ indir=.
+ ref=HEAD
+ n=1
+ message='commit %s'
+ filename='%s.t'
+ contents='content %s'
+ while test $# -gt 0
+ do
+ case "$1" in
+ -C)
+ indir=$2
+ shift
+ ;;
+ --ref=*)
+ ref=${1#--*=}
+ ;;
+ --start=*)
+ n=${1#--*=}
+ ;;
+ --message=*)
+ message=${1#--*=}
+ ;;
+ --filename=*)
+ filename=${1#--*=}
+ ;;
+ --contents=*)
+ contents=${1#--*=}
+ ;;
+ --id=*)
+ message="${1#--*=} %s"
+ filename="${1#--*=}-%s.t"
+ contents="${1#--*=} %s"
+ ;;
+ -*)
+ BUG "invalid test_commit_bulk option: $1"
+ ;;
+ *)
+ break
+ ;;
+ esac
+ shift
+ done
+ total=$1
+
+ {
+ # A "reset ... from" instructs fastimport to build on an
+ # existing branch tip rather than trying to overwrite.
+ if tip=$(git -C "$indir" rev-parse --verify "$ref" 2>/dev/null)
+ then
+ echo "reset $ref"
+ echo "from $tip"
+ fi
+
+ while test "$total" -gt 0
+ do
+ test_tick &&
+ echo "commit $ref"
+ printf 'author %s <%s> %s\n' \
+ "$GIT_AUTHOR_NAME" \
+ "$GIT_AUTHOR_EMAIL" \
+ "$GIT_AUTHOR_DATE"
+ printf 'committer %s <%s> %s\n' \
+ "$GIT_COMMITTER_NAME" \
+ "$GIT_COMMITTER_EMAIL" \
+ "$GIT_COMMITTER_DATE"
+ echo "data <<EOF"
+ printf "$message\n" $n
+ echo "EOF"
+ printf "M 644 inline $filename\n" $n
+ echo "data <<EOF"
+ printf "$contents\n" $n
+ echo "EOF"
+ echo
+ n=$((n + 1))
+ total=$((total - 1))
+ done
+
+ } >"$tmpfile"
+
+ git -C "$indir" \
+ -c fastimport.unpacklimit=0 \
+ fast-import <"$tmpfile" || return 1
+
+ # This will be left in place on failure, which may aid debugging.
+ rm -f "$tmpfile"
+
+ # If we updated HEAD, then be nice and update the index and working
+ # tree, too.
+ if test "$ref" = "HEAD"
+ then
+ git -C "$indir" checkout -f HEAD || return 1
+ fi
+
+}
+
# This function helps systems where core.filemode=false is set.
# Use it instead of plain 'chmod +x' to set or unset the executable bit
# of a file in the working directory and add it to the index.
--
2.22.0.775.g4ba9815492
