From: Jari Aalto <jari.aalto@xxxxxxxxx>
Signed-off-by: Jari Aalto <jari.aalto@xxxxxxxxx>
---
Documentation/git-commit.txt | 220 +++++++++++++++++++++---------------------
1 files changed, 110 insertions(+), 110 deletions(-)
diff --git a/Documentation/git-commit.txt b/Documentation/git-commit.txt
index 42fb1f5..770f20b 100644
--- a/Documentation/git-commit.txt
+++ b/Documentation/git-commit.txt
@@ -59,73 +59,6 @@ OPTIONS
been modified and deleted, but new files you have not
told git about are not affected.
--C <commit>::
---reuse-message=<commit>::
- Take an existing commit object, and reuse the log message
- and the authorship information (including the timestamp)
- when creating the commit.
-
--c <commit>::
---reedit-message=<commit>::
- Like '-C', but with '-c' the editor is invoked, so that
- the user can further edit the commit message.
-
---reset-author::
- When used with -C/-c/--amend options, declare that the
- authorship of the resulting commit now belongs of the committer.
- This also renews the author timestamp.
-
---short::
- When doing a dry-run, give the output in the short-format. See
- linkgit:git-status[1] for details. Implies `--dry-run`.
-
---porcelain::
- When doing a dry-run, give the output in a porcelain-ready
- format. See linkgit:git-status[1] for details. Implies
- `--dry-run`.
-
--z::
- When showing `short` or `porcelain` status output, terminate
- entries in the status output with NUL, instead of LF. If no
- format is given, implies the `--porcelain` output format.
-
--F <file>::
---file=<file>::
- Take the commit message from the given file. Use '-' to
- read the message from the standard input.
-
---author=<author>::
- Override the commit author. Specify an explicit author using the
- standard `A U Thor <author@xxxxxxxxxxx>` format. Otherwise <author>
- is assumed to be a pattern and is used to search for an existing
- commit by that author (i.e. rev-list --all -i --author=<author>);
- the commit author is then copied from the first such commit found.
-
---date=<date>::
- Override the author date used in the commit.
-
--m <msg>::
---message=<msg>::
- Use the given <msg> as the commit message.
-
--t <file>::
---template=<file>::
- Use the contents of the given file as the initial version
- of the commit message. The editor is invoked and you can
- make subsequent changes. If a message is specified using
- the `-m` or `-F` options, this option has no effect. This
- overrides the `commit.template` configuration variable.
-
--s::
---signoff::
- Add Signed-off-by line by the committer at the end of the commit
- log message.
-
--n::
---no-verify::
- This option bypasses the pre-commit and commit-msg hooks.
- See also linkgit:githooks[5].
-
--allow-empty::
Usually recording a commit that has the exact same tree as its
sole parent commit is a mistake, and the command prevents you
@@ -138,23 +71,6 @@ OPTIONS
empty commit message without using plumbing commands like
linkgit:git-commit-tree[1].
---cleanup=<mode>::
- This option sets how the commit message is cleaned up.
- The '<mode>' can be one of 'verbatim', 'whitespace', 'strip',
- and 'default'. The 'default' mode will strip leading and
- trailing empty lines and #commentary from the commit message
- only if the message is to be edited. Otherwise only whitespace
- removed. The 'verbatim' mode does not change message at all,
- 'whitespace' removes just leading/trailing whitespace lines
- and 'strip' removes both whitespace and commentary.
-
--e::
---edit::
- The message taken from file with `-F`, command line with
- `-m`, and from file with `-C` are usually used as the
- commit log message unmodified. This option lets you
- further edit the message taken from these sources.
-
--amend::
Used to amend the tip of the current branch. Prepare the tree
object you would want to replace the latest commit as usual
@@ -180,6 +96,68 @@ You should understand the implications of rewriting history if you
amend a commit that has already been published. (See the "RECOVERING
FROM UPSTREAM REBASE" section in linkgit:git-rebase[1].)
+--author=<author>::
+ Override the commit author. Specify an explicit author using the
+ standard `A U Thor <author@xxxxxxxxxxx>` format. Otherwise <author>
+ is assumed to be a pattern and is used to search for an existing
+ commit by that author (i.e. rev-list --all -i --author=<author>);
+ the commit author is then copied from the first such commit found.
+
+-c <commit>::
+--reedit-message=<commit>::
+ Like '-C', but with '-c' the editor is invoked, so that
+ the user can further edit the commit message.
+
+-C <commit>::
+--reuse-message=<commit>::
+ Take an existing commit object, and reuse the log message
+ and the authorship information (including the timestamp)
+ when creating the commit.
+
+--cleanup=<mode>::
+ This option sets how the commit message is cleaned up.
+ The '<mode>' can be one of 'verbatim', 'whitespace', 'strip',
+ and 'default'. The 'default' mode will strip leading and
+ trailing empty lines and #commentary from the commit message
+ only if the message is to be edited. Otherwise only whitespace
+ removed. The 'verbatim' mode does not change message at all,
+ 'whitespace' removes just leading/trailing whitespace lines
+ and 'strip' removes both whitespace and commentary.
+
+--date=<date>::
+ Override the author date used in the commit.
+
+--dry-run::
+ Do not create a commit, but show a list of paths that are
+ to be committed, paths with local changes that will be left
+ uncommitted and paths that are untracked.
+
+-e::
+--edit::
+ The message taken from file with `-F`, command line with
+ `-m`, and from file with `-C` are usually used as the
+ commit log message unmodified. This option lets you
+ further edit the message taken from these sources.
+
+-F <file>::
+--file=<file>::
+ Take the commit message from the given file. Use '-' to
+ read the message from the standard input.
+
+-m <msg>::
+--message=<msg>::
+ Use the given <msg> as the commit message.
+
+-n::
+--no-verify::
+ This option bypasses the pre-commit and commit-msg hooks.
+ See also linkgit:githooks[5].
+
+--no-status::
+ Do not include the output of linkgit:git-status[1] in the
+ commit message template when using an editor to prepare the
+ default commit message. See option `--status'.
+
-i::
--include::
Before making a commit out of staged contents so far,
@@ -199,6 +177,50 @@ FROM UPSTREAM REBASE" section in linkgit:git-rebase[1].)
the last commit without committing changes that have
already been staged.
+-q::
+--quiet::
+ Suppress commit summary message.
+
+--status::
+ Include the output of linkgit:git-status[1] in the commit
+ message template when using an editor to prepare the commit
+ message. Defaults to on, but can be used to override
+ configuration variable commit.status. See option `--no-status'.
+
+--porcelain::
+ When doing a dry-run, give the output in a porcelain-ready
+ format. See linkgit:git-status[1] for details. Implies
+ `--dry-run`.
+
+--reset-author::
+ When used with -C/-c/--amend options, declare that the
+ authorship of the resulting commit now belongs of the committer.
+ This also renews the author timestamp.
+
+-s::
+--signoff::
+ Add Signed-off-by line by the committer at the end of the commit
+ log message.
+
+--short::
+ When doing a dry-run, give the output in the short-format. See
+ linkgit:git-status[1] for details. Implies `--dry-run`.
+
+-t <file>::
+--template=<file>::
+ Use the contents of the given file as the initial version
+ of the commit message. The editor is invoked and you can
+ make subsequent changes. If a message is specified using
+ the `-m` or `-F` options, this option has no effect. This
+ overrides the `commit.template` configuration variable.
+
+-v::
+--verbose::
+ Show unified diff between the HEAD commit and what
+ would be committed at the bottom of the commit message
+ template. Note that this diff output doesn't have its
+ lines prefixed with '#'.
+
-u[<mode>]::
--untracked-files[=<mode>]::
Show untracked files (Default: 'all').
@@ -216,32 +238,10 @@ See linkgit:git-config[1] for configuration variable
used to change the default for when the option is not
specified.
--v::
---verbose::
- Show unified diff between the HEAD commit and what
- would be committed at the bottom of the commit message
- template. Note that this diff output doesn't have its
- lines prefixed with '#'.
-
--q::
---quiet::
- Suppress commit summary message.
-
---dry-run::
- Do not create a commit, but show a list of paths that are
- to be committed, paths with local changes that will be left
- uncommitted and paths that are untracked.
-
---status::
- Include the output of linkgit:git-status[1] in the commit
- message template when using an editor to prepare the commit
- message. Defaults to on, but can be used to override
- configuration variable commit.status.
-
---no-status::
- Do not include the output of linkgit:git-status[1] in the
- commit message template when using an editor to prepare the
- default commit message.
+-z::
+ When showing `short` or `porcelain` status output, terminate
+ entries in the status output with NUL, instead of LF. If no
+ format is given, implies the `--porcelain` output format.
\--::
Do not interpret any more arguments as options.
--
1.7.2.3
--
To unsubscribe from this list: send the line "unsubscribe git" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html