They are both slower than the new BLK_SHA1 implementation, so it is
pointless to keep them around.
Signed-off-by: Nicolas Pitre <nico@xxxxxxx>
---
Someone else would need to make the call for the PPC version. IMHO it
probably should go too, as no Makefile rule ever included it by default
even on PPC platforms. Some reports indicate that the BLK_SHA1 version
is faster on PPC as well.
And because the BLK_SHA1 is faster than the openssl version, then the
BLK_SHA1 could become the default (and only) choice. But one thing
at a time.
Makefile | 26 +------
arm/sha1.c | 82 --------------------
arm/sha1.h | 23 ------
arm/sha1_arm.S | 183 ---------------------------------------------
block-sha1/sha1.c | 6 +-
configure.ac | 10 +--
mozilla-sha1/sha1.c | 151 -------------------------------------
mozilla-sha1/sha1.h | 50 ------------
8 files changed, 7 insertions(+), 524 deletions(-)
diff --git a/Makefile b/Makefile
index f94fe05..4190a5d 100644
--- a/Makefile
+++ b/Makefile
@@ -16,7 +16,7 @@ all::
# when attempting to read from an fopen'ed directory.
#
# Define NO_OPENSSL environment variable if you do not have OpenSSL.
-# This also implies MOZILLA_SHA1.
+# This also implies BLK_SHA1.
#
# Define NO_CURL if you do not have libcurl installed. git-http-pull and
# git-http-push are not built, and you cannot use http:// and https://
@@ -91,14 +91,6 @@ all::
# Define PPC_SHA1 environment variable when running make to make use of
# a bundled SHA1 routine optimized for PowerPC.
#
-# Define ARM_SHA1 environment variable when running make to make use of
-# a bundled SHA1 routine optimized for ARM.
-#
-# Define MOZILLA_SHA1 environment variable when running make to make use of
-# a bundled SHA1 routine coming from Mozilla. It is GPL'd and should be fast
-# on non-x86 architectures (e.g. PowerPC), while the OpenSSL version (default
-# choice) has very fast version optimized for i586.
-#
# Define NEEDS_SSL_WITH_CRYPTO if you need -lcrypto with -lssl (Darwin).
#
# Define NEEDS_LIBICONV if linking with libc is not enough (Darwin).
@@ -930,10 +922,6 @@ else
NO_PTHREADS = YesPlease
endif
endif
-ifneq (,$(findstring arm,$(uname_M)))
- ARM_SHA1 = YesPlease
- NO_MKSTEMPS = YesPlease
-endif
-include config.mak.autogen
-include config.mak
@@ -1025,7 +1013,7 @@ ifndef NO_OPENSSL
endif
else
BASIC_CFLAGS += -DNO_OPENSSL
- MOZILLA_SHA1 = 1
+ BLK_SHA1 = 1
OPENSSL_LIBSSL =
endif
ifdef NEEDS_SSL_WITH_CRYPTO
@@ -1182,20 +1170,10 @@ ifdef PPC_SHA1
SHA1_HEADER = "ppc/sha1.h"
LIB_OBJS += ppc/sha1.o ppc/sha1ppc.o
else
-ifdef ARM_SHA1
- SHA1_HEADER = "arm/sha1.h"
- LIB_OBJS += arm/sha1.o arm/sha1_arm.o
-else
-ifdef MOZILLA_SHA1
- SHA1_HEADER = "mozilla-sha1/sha1.h"
- LIB_OBJS += mozilla-sha1/sha1.o
-else
SHA1_HEADER = <openssl/sha.h>
EXTLIBS += $(LIB_4_CRYPTO)
endif
endif
-endif
-endif
ifdef NO_PERL_MAKEMAKER
export NO_PERL_MAKEMAKER
endif
diff --git a/arm/sha1.c b/arm/sha1.c
deleted file mode 100644
index c61ad4a..0000000
--- a/arm/sha1.c
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * SHA-1 implementation optimized for ARM
- *
- * Copyright: (C) 2005 by Nicolas Pitre <nico@xxxxxxx>
- * Created: September 17, 2005
- */
-
-#include <string.h>
-#include "sha1.h"
-
-extern void arm_sha_transform(uint32_t *hash, const unsigned char *data, uint32_t *W);
-
-void arm_SHA1_Init(arm_SHA_CTX *c)
-{
- c->len = 0;
- c->hash[0] = 0x67452301;
- c->hash[1] = 0xefcdab89;
- c->hash[2] = 0x98badcfe;
- c->hash[3] = 0x10325476;
- c->hash[4] = 0xc3d2e1f0;
-}
-
-void arm_SHA1_Update(arm_SHA_CTX *c, const void *p, unsigned long n)
-{
- uint32_t workspace[80];
- unsigned int partial;
- unsigned long done;
-
- partial = c->len & 0x3f;
- c->len += n;
- if ((partial + n) >= 64) {
- if (partial) {
- done = 64 - partial;
- memcpy(c->buffer + partial, p, done);
- arm_sha_transform(c->hash, c->buffer, workspace);
- partial = 0;
- } else
- done = 0;
- while (n >= done + 64) {
- arm_sha_transform(c->hash, p + done, workspace);
- done += 64;
- }
- } else
- done = 0;
- if (n - done)
- memcpy(c->buffer + partial, p + done, n - done);
-}
-
-void arm_SHA1_Final(unsigned char *hash, arm_SHA_CTX *c)
-{
- uint64_t bitlen;
- uint32_t bitlen_hi, bitlen_lo;
- unsigned int i, offset, padlen;
- unsigned char bits[8];
- static const unsigned char padding[64] = { 0x80, };
-
- bitlen = c->len << 3;
- offset = c->len & 0x3f;
- padlen = ((offset < 56) ? 56 : (64 + 56)) - offset;
- arm_SHA1_Update(c, padding, padlen);
-
- bitlen_hi = bitlen >> 32;
- bitlen_lo = bitlen & 0xffffffff;
- bits[0] = bitlen_hi >> 24;
- bits[1] = bitlen_hi >> 16;
- bits[2] = bitlen_hi >> 8;
- bits[3] = bitlen_hi;
- bits[4] = bitlen_lo >> 24;
- bits[5] = bitlen_lo >> 16;
- bits[6] = bitlen_lo >> 8;
- bits[7] = bitlen_lo;
- arm_SHA1_Update(c, bits, 8);
-
- for (i = 0; i < 5; i++) {
- uint32_t v = c->hash[i];
- hash[0] = v >> 24;
- hash[1] = v >> 16;
- hash[2] = v >> 8;
- hash[3] = v;
- hash += 4;
- }
-}
diff --git a/arm/sha1.h b/arm/sha1.h
deleted file mode 100644
index b61b618..0000000
--- a/arm/sha1.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * SHA-1 implementation optimized for ARM
- *
- * Copyright: (C) 2005 by Nicolas Pitre <nico@xxxxxxx>
- * Created: September 17, 2005
- */
-
-#include <stdint.h>
-
-typedef struct {
- uint64_t len;
- uint32_t hash[5];
- unsigned char buffer[64];
-} arm_SHA_CTX;
-
-void arm_SHA1_Init(arm_SHA_CTX *c);
-void arm_SHA1_Update(arm_SHA_CTX *c, const void *p, unsigned long n);
-void arm_SHA1_Final(unsigned char *hash, arm_SHA_CTX *c);
-
-#define git_SHA_CTX arm_SHA_CTX
-#define git_SHA1_Init arm_SHA1_Init
-#define git_SHA1_Update arm_SHA1_Update
-#define git_SHA1_Final arm_SHA1_Final
diff --git a/arm/sha1_arm.S b/arm/sha1_arm.S
deleted file mode 100644
index 41e9263..0000000
--- a/arm/sha1_arm.S
+++ /dev/null
@@ -1,183 +0,0 @@
-/*
- * SHA transform optimized for ARM
- *
- * Copyright: (C) 2005 by Nicolas Pitre <nico@xxxxxxx>
- * Created: September 17, 2005
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
- .text
- .globl arm_sha_transform
-
-/*
- * void sha_transform(uint32_t *hash, const unsigned char *data, uint32_t *W);
- *
- * note: the "data" pointer may be unaligned.
- */
-
-arm_sha_transform:
-
- stmfd sp!, {r4 - r8, lr}
-
- @ for (i = 0; i < 16; i++)
- @ W[i] = ntohl(((uint32_t *)data)[i]);
-
-#ifdef __ARMEB__
- mov r4, r0
- mov r0, r2
- mov r2, #64
- bl memcpy
- mov r2, r0
- mov r0, r4
-#else
- mov r3, r2
- mov lr, #16
-1: ldrb r4, [r1], #1
- ldrb r5, [r1], #1
- ldrb r6, [r1], #1
- ldrb r7, [r1], #1
- subs lr, lr, #1
- orr r5, r5, r4, lsl #8
- orr r6, r6, r5, lsl #8
- orr r7, r7, r6, lsl #8
- str r7, [r3], #4
- bne 1b
-#endif
-
- @ for (i = 0; i < 64; i++)
- @ W[i+16] = ror(W[i+13] ^ W[i+8] ^ W[i+2] ^ W[i], 31);
-
- sub r3, r2, #4
- mov lr, #64
-2: ldr r4, [r3, #4]!
- subs lr, lr, #1
- ldr r5, [r3, #8]
- ldr r6, [r3, #32]
- ldr r7, [r3, #52]
- eor r4, r4, r5
- eor r4, r4, r6
- eor r4, r4, r7
- mov r4, r4, ror #31
- str r4, [r3, #64]
- bne 2b
-
- /*
- * The SHA functions are:
- *
- * f1(B,C,D) = (D ^ (B & (C ^ D)))
- * f2(B,C,D) = (B ^ C ^ D)
- * f3(B,C,D) = ((B & C) | (D & (B | C)))
- *
- * Then the sub-blocks are processed as follows:
- *
- * A' = ror(A, 27) + f(B,C,D) + E + K + *W++
- * B' = A
- * C' = ror(B, 2)
- * D' = C
- * E' = D
- *
- * We therefore unroll each loop 5 times to avoid register shuffling.
- * Also the ror for C (and also D and E which are successivelyderived
- * from it) is applied in place to cut on an additional mov insn for
- * each round.
- */
-
- .macro sha_f1, A, B, C, D, E
- ldr r3, [r2], #4
- eor ip, \C, \D
- add \E, r1, \E, ror #2
- and ip, \B, ip, ror #2
- add \E, \E, \A, ror #27
- eor ip, ip, \D, ror #2
- add \E, \E, r3
- add \E, \E, ip
- .endm
-
- .macro sha_f2, A, B, C, D, E
- ldr r3, [r2], #4
- add \E, r1, \E, ror #2
- eor ip, \B, \C, ror #2
- add \E, \E, \A, ror #27
- eor ip, ip, \D, ror #2
- add \E, \E, r3
- add \E, \E, ip
- .endm
-
- .macro sha_f3, A, B, C, D, E
- ldr r3, [r2], #4
- add \E, r1, \E, ror #2
- orr ip, \B, \C, ror #2
- add \E, \E, \A, ror #27
- and ip, ip, \D, ror #2
- add \E, \E, r3
- and r3, \B, \C, ror #2
- orr ip, ip, r3
- add \E, \E, ip
- .endm
-
- ldmia r0, {r4 - r8}
-
- mov lr, #4
- ldr r1, .L_sha_K + 0
-
- /* adjust initial values */
- mov r6, r6, ror #30
- mov r7, r7, ror #30
- mov r8, r8, ror #30
-
-3: subs lr, lr, #1
- sha_f1 r4, r5, r6, r7, r8
- sha_f1 r8, r4, r5, r6, r7
- sha_f1 r7, r8, r4, r5, r6
- sha_f1 r6, r7, r8, r4, r5
- sha_f1 r5, r6, r7, r8, r4
- bne 3b
-
- ldr r1, .L_sha_K + 4
- mov lr, #4
-
-4: subs lr, lr, #1
- sha_f2 r4, r5, r6, r7, r8
- sha_f2 r8, r4, r5, r6, r7
- sha_f2 r7, r8, r4, r5, r6
- sha_f2 r6, r7, r8, r4, r5
- sha_f2 r5, r6, r7, r8, r4
- bne 4b
-
- ldr r1, .L_sha_K + 8
- mov lr, #4
-
-5: subs lr, lr, #1
- sha_f3 r4, r5, r6, r7, r8
- sha_f3 r8, r4, r5, r6, r7
- sha_f3 r7, r8, r4, r5, r6
- sha_f3 r6, r7, r8, r4, r5
- sha_f3 r5, r6, r7, r8, r4
- bne 5b
-
- ldr r1, .L_sha_K + 12
- mov lr, #4
-
-6: subs lr, lr, #1
- sha_f2 r4, r5, r6, r7, r8
- sha_f2 r8, r4, r5, r6, r7
- sha_f2 r7, r8, r4, r5, r6
- sha_f2 r6, r7, r8, r4, r5
- sha_f2 r5, r6, r7, r8, r4
- bne 6b
-
- ldmia r0, {r1, r2, r3, ip, lr}
- add r4, r1, r4
- add r5, r2, r5
- add r6, r3, r6, ror #2
- add r7, ip, r7, ror #2
- add r8, lr, r8, ror #2
- stmia r0, {r4 - r8}
-
- ldmfd sp!, {r4 - r8, pc}
-
-.L_sha_K:
- .word 0x5a827999, 0x6ed9eba1, 0x8f1bbcdc, 0xca62c1d6
diff --git a/block-sha1/sha1.c b/block-sha1/sha1.c
index 464cb25..a1228cf 100644
--- a/block-sha1/sha1.c
+++ b/block-sha1/sha1.c
@@ -1,7 +1,9 @@
/*
- * Based on the Mozilla SHA1 (see mozilla-sha1/sha1.c),
- * optimized to do word accesses rather than byte accesses,
+ * SHA1 routine optimized to do word accesses rather than byte accesses,
* and to avoid unnecessary copies into the context array.
+ *
+ * This was initially based on the Mozilla SHA1 implementation, although
+ * none of the original Mozilla code remains.
*/
#include <string.h>
diff --git a/configure.ac b/configure.ac
index 3f1922d..b09b8e4 100644
--- a/configure.ac
+++ b/configure.ac
@@ -156,19 +156,11 @@ AC_MSG_NOTICE([CHECKS for site configuration])
# tests. These tests take up a significant amount of the total test time
# but are not needed unless you plan to talk to SVN repos.
#
-# Define MOZILLA_SHA1 environment variable when running make to make use of
-# a bundled SHA1 routine coming from Mozilla. It is GPL'd and should be fast
-# on non-x86 architectures (e.g. PowerPC), while the OpenSSL version (default
-# choice) has very fast version optimized for i586.
-#
# Define PPC_SHA1 environment variable when running make to make use of
# a bundled SHA1 routine optimized for PowerPC.
#
-# Define ARM_SHA1 environment variable when running make to make use of
-# a bundled SHA1 routine optimized for ARM.
-#
# Define NO_OPENSSL environment variable if you do not have OpenSSL.
-# This also implies MOZILLA_SHA1.
+# This also implies BLK_SHA1.
#
# Define OPENSSLDIR=/foo/bar if your openssl header and library files are in
# /foo/bar/include and /foo/bar/lib directories.
diff --git a/mozilla-sha1/sha1.c b/mozilla-sha1/sha1.c
deleted file mode 100644
index 95a4ebf..0000000
--- a/mozilla-sha1/sha1.c
+++ /dev/null
@@ -1,151 +0,0 @@
-/*
- * The contents of this file are subject to the Mozilla Public
- * License Version 1.1 (the "License"); you may not use this file
- * except in compliance with the License. You may obtain a copy of
- * the License at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS
- * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
- * implied. See the License for the specific language governing
- * rights and limitations under the License.
- *
- * The Original Code is SHA 180-1 Reference Implementation (Compact version)
- *
- * The Initial Developer of the Original Code is Paul Kocher of
- * Cryptography Research. Portions created by Paul Kocher are
- * Copyright (C) 1995-9 by Cryptography Research, Inc. All
- * Rights Reserved.
- *
- * Contributor(s):
- *
- * Paul Kocher
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License Version 2 or later (the
- * "GPL"), in which case the provisions of the GPL are applicable
- * instead of those above. If you wish to allow use of your
- * version of this file only under the terms of the GPL and not to
- * allow others to use your version of this file under the MPL,
- * indicate your decision by deleting the provisions above and
- * replace them with the notice and other provisions required by
- * the GPL. If you do not delete the provisions above, a recipient
- * may use your version of this file under either the MPL or the
- * GPL.
- */
-
-#include "sha1.h"
-
-static void shaHashBlock(moz_SHA_CTX *ctx);
-
-void moz_SHA1_Init(moz_SHA_CTX *ctx) {
- int i;
-
- ctx->lenW = 0;
- ctx->sizeHi = ctx->sizeLo = 0;
-
- /* Initialize H with the magic constants (see FIPS180 for constants)
- */
- ctx->H[0] = 0x67452301;
- ctx->H[1] = 0xefcdab89;
- ctx->H[2] = 0x98badcfe;
- ctx->H[3] = 0x10325476;
- ctx->H[4] = 0xc3d2e1f0;
-
- for (i = 0; i < 80; i++)
- ctx->W[i] = 0;
-}
-
-
-void moz_SHA1_Update(moz_SHA_CTX *ctx, const void *_dataIn, int len) {
- const unsigned char *dataIn = _dataIn;
- int i;
-
- /* Read the data into W and process blocks as they get full
- */
- for (i = 0; i < len; i++) {
- ctx->W[ctx->lenW / 4] <<= 8;
- ctx->W[ctx->lenW / 4] |= (unsigned int)dataIn[i];
- if ((++ctx->lenW) % 64 == 0) {
- shaHashBlock(ctx);
- ctx->lenW = 0;
- }
- ctx->sizeLo += 8;
- ctx->sizeHi += (ctx->sizeLo < 8);
- }
-}
-
-
-void moz_SHA1_Final(unsigned char hashout[20], moz_SHA_CTX *ctx) {
- unsigned char pad0x80 = 0x80;
- unsigned char pad0x00 = 0x00;
- unsigned char padlen[8];
- int i;
-
- /* Pad with a binary 1 (e.g. 0x80), then zeroes, then length
- */
- padlen[0] = (unsigned char)((ctx->sizeHi >> 24) & 255);
- padlen[1] = (unsigned char)((ctx->sizeHi >> 16) & 255);
- padlen[2] = (unsigned char)((ctx->sizeHi >> 8) & 255);
- padlen[3] = (unsigned char)((ctx->sizeHi >> 0) & 255);
- padlen[4] = (unsigned char)((ctx->sizeLo >> 24) & 255);
- padlen[5] = (unsigned char)((ctx->sizeLo >> 16) & 255);
- padlen[6] = (unsigned char)((ctx->sizeLo >> 8) & 255);
- padlen[7] = (unsigned char)((ctx->sizeLo >> 0) & 255);
- moz_SHA1_Update(ctx, &pad0x80, 1);
- while (ctx->lenW != 56)
- moz_SHA1_Update(ctx, &pad0x00, 1);
- moz_SHA1_Update(ctx, padlen, 8);
-
- /* Output hash
- */
- for (i = 0; i < 20; i++) {
- hashout[i] = (unsigned char)(ctx->H[i / 4] >> 24);
- ctx->H[i / 4] <<= 8;
- }
-
- /*
- * Re-initialize the context (also zeroizes contents)
- */
- moz_SHA1_Init(ctx);
-}
-
-
-#define SHA_ROT(X,n) (((X) << (n)) | ((X) >> (32-(n))))
-
-static void shaHashBlock(moz_SHA_CTX *ctx) {
- int t;
- unsigned int A,B,C,D,E,TEMP;
-
- for (t = 16; t <= 79; t++)
- ctx->W[t] =
- SHA_ROT(ctx->W[t-3] ^ ctx->W[t-8] ^ ctx->W[t-14] ^ ctx->W[t-16], 1);
-
- A = ctx->H[0];
- B = ctx->H[1];
- C = ctx->H[2];
- D = ctx->H[3];
- E = ctx->H[4];
-
- for (t = 0; t <= 19; t++) {
- TEMP = SHA_ROT(A,5) + (((C^D)&B)^D) + E + ctx->W[t] + 0x5a827999;
- E = D; D = C; C = SHA_ROT(B, 30); B = A; A = TEMP;
- }
- for (t = 20; t <= 39; t++) {
- TEMP = SHA_ROT(A,5) + (B^C^D) + E + ctx->W[t] + 0x6ed9eba1;
- E = D; D = C; C = SHA_ROT(B, 30); B = A; A = TEMP;
- }
- for (t = 40; t <= 59; t++) {
- TEMP = SHA_ROT(A,5) + ((B&C)|(D&(B|C))) + E + ctx->W[t] + 0x8f1bbcdc;
- E = D; D = C; C = SHA_ROT(B, 30); B = A; A = TEMP;
- }
- for (t = 60; t <= 79; t++) {
- TEMP = SHA_ROT(A,5) + (B^C^D) + E + ctx->W[t] + 0xca62c1d6;
- E = D; D = C; C = SHA_ROT(B, 30); B = A; A = TEMP;
- }
-
- ctx->H[0] += A;
- ctx->H[1] += B;
- ctx->H[2] += C;
- ctx->H[3] += D;
- ctx->H[4] += E;
-}
diff --git a/mozilla-sha1/sha1.h b/mozilla-sha1/sha1.h
deleted file mode 100644
index aa48a46..0000000
--- a/mozilla-sha1/sha1.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * The contents of this file are subject to the Mozilla Public
- * License Version 1.1 (the "License"); you may not use this file
- * except in compliance with the License. You may obtain a copy of
- * the License at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS
- * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
- * implied. See the License for the specific language governing
- * rights and limitations under the License.
- *
- * The Original Code is SHA 180-1 Header File
- *
- * The Initial Developer of the Original Code is Paul Kocher of
- * Cryptography Research. Portions created by Paul Kocher are
- * Copyright (C) 1995-9 by Cryptography Research, Inc. All
- * Rights Reserved.
- *
- * Contributor(s):
- *
- * Paul Kocher
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License Version 2 or later (the
- * "GPL"), in which case the provisions of the GPL are applicable
- * instead of those above. If you wish to allow use of your
- * version of this file only under the terms of the GPL and not to
- * allow others to use your version of this file under the MPL,
- * indicate your decision by deleting the provisions above and
- * replace them with the notice and other provisions required by
- * the GPL. If you do not delete the provisions above, a recipient
- * may use your version of this file under either the MPL or the
- * GPL.
- */
-
-typedef struct {
- unsigned int H[5];
- unsigned int W[80];
- int lenW;
- unsigned int sizeHi,sizeLo;
-} moz_SHA_CTX;
-
-void moz_SHA1_Init(moz_SHA_CTX *ctx);
-void moz_SHA1_Update(moz_SHA_CTX *ctx, const void *dataIn, int len);
-void moz_SHA1_Final(unsigned char hashout[20], moz_SHA_CTX *ctx);
-
-#define git_SHA_CTX moz_SHA_CTX
-#define git_SHA1_Init moz_SHA1_Init
-#define git_SHA1_Update moz_SHA1_Update
-#define git_SHA1_Final moz_SHA1_Final
--
To unsubscribe from this list: send the line "unsubscribe git" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html