Hello, sine your new version gimp 1.1.17 my segfault error is gone Thanks a lot!! But these silly messages are still there. I recompiled my perl and my glib, $LANGUAGE is set with YAST. But the message is up every time i start Gimp. What could i do? Using Gimp 1.1.17 perl 5.003 glib 2.1.2 -- Tschau ;-) jens
XFree86 Version 3.3.4 / X Window System (protocol Version 11, revision 0, vendor release 6300) Release Date: July 13 1999 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (see http://www.XFree86.Org/FAQ) Operating System: Linux 2.2.9 i686 [ELF] Configured drivers: Mach64: accelerated server for ATI Mach64 graphics adaptors (Patchlevel 0) (using VT number 7) XF86Config: /etc/XF86Config (**) stands for supplied, (--) stands for probed/default values (**) XKB: rules: "xfree86" (**) XKB: model: "pc104" (**) XKB: layout: "de" (**) XKB: variant: "nodeadkeys" (**) Mouse: type: Microsoft, device: /dev/ttyS0, baudrate: 1200 (**) Mouse: samplerate: 60, buttons: 3 (**) Mach64: Graphics device ID: "Primary-Card" (**) Mach64: Monitor ID: "Primary-Monitor" (--) Mach64: Mode "1600x1000" needs vert refresh rate of 33.12 Hz. Deleted. (--) Mach64: Mode "1280x960" needs vert refresh rate of 43.04 Hz. Deleted. (--) Mach64: Mode "1600x1200" needs vert refresh rate of 27.59 Hz. Deleted. (--) Mach64: Mode "1280x1024" needs vert refresh rate of 40.35 Hz. Deleted. (--) Mach64: Mode "1152x864" needs vert refresh rate of 53.29 Hz. Deleted. (**) FontPath set to "/usr/X11R6/lib/X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/100dpi:unscaled,/usr/X11R6/lib/X11/fonts/Type1,/usr/X11R6/lib/X11/fonts/URW,/usr/X11R6/lib/X11/fonts/Speedo,/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts/75dpi,/usr/X11R6/lib/X11/fonts/100dpi" (--) Mach64: PCI: Mach64 VT rev 64, Aperture @ 0xe0000000, Block I/O @ 0x6200 (--) Mach64: Card type: PCI (--) Mach64: Memory type: EDO (3) (--) Mach64: Clock type: Internal (--) Mach64: Maximum allowed dot-clock: 80.000 MHz (**) Mach64: Mode "1024x768": mode clock = 71.940 (--) Mach64: Virtual resolution: 1024x768 (**) Mach64: Video RAM: 2048k (--) Mach64: Using hardware cursor (--) Mach64: Using 16 MB aperture @ 0xe0000000 (--) Mach64: Ramdac is Internal (--) Mach64: Ramdac speed: 80 MHz (**) Mach64: Color weight: 565 (--) Mach64: Pixmap cache: 0 256x256 slots, 0 128x128 slots, 0 64x64 slots (--) Mach64: Font cache: 0 fonts (--) Mach64: Pixmap cache: 0 256x256 slots, 0 128x128 slots, 0 64x64 slots (--) Mach64: Pixmap cache: 0 256x256 slots, 0 128x128 slots, 0 64x64 slots Gdk-WARNING **: locale not supported by C library perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = "de_DE", LC_MESSAGES = "de", LANG = "de_DE" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = "de_DE", LC_MESSAGES = "de", LANG = "de_DE" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). waiting for X server to shut down
