Michael
I started all fresh .
This is what I observe If I use the following configure everything works .
AR=ar LDFLAGS="-Wl,-rpath,/local/gagupta/gccfolder/cross-tools/lib" \
${SOURCES_GCC}/configure \
--prefix=${CLFS_CROSS_TOOLS} \
--target=${CLFS_TARGET} --without-headers
But I give gcc configure as below there are errors .
${SOURCES_GCC}/configure \
--prefix=${CLFS_CROSS_TOOLS} --target=${CLFS_TARGET} --without-headers --enable-lanugages=c,c++ --enable-__cxa_atexit
make[3]: Leaving directory `/local/gagupta/gccfolder/crosscompileorig/gcc-build/libiberty/testsuite'
make[2]: Leaving directory `/local/gagupta/gccfolder/crosscompileorig/gcc-build/libiberty'
/bin/sh: line 3: cd: x86_64-redhat-linux-gnu/libstdc++-v3: No such file or directory
make[1]: *** [install-target-libstdc++-v3] Error 1
make[1]: Leaving directory `/local/gagupta/gccfolder/crosscompileorig/gcc-build'
make: *** [install] Error 2
~
This is what I think I need to build gcc with c,c++ lanuages and libc and kernel headers installed in sysroot . but this is not happening not sure what is impacting .
I tried setting Even the environment variable to make sure that gcc looks into the right path but appears nothing is happening .
PATH=$CLFS_CROSS_TOOLS/bin:$CLFS_CROSS_TOOLS/lib:$CLFS_CROSS_TOOLS/lib64:/local/gagupta/gccfolder:$PATH
C_INCLUDE_PATH=$CLFS:$CLFS_CROSS_TOOLS:$C_INCLUDE_PATH
CPLUS_INCLUDE_PATH=$CLFS:$CLFS_CROSS_TOOLS:$CPLUS_INCLUDE_PATH
CPATH=/local/gagupta/gccfolder/usr/include:/local/gagupta/gccfolder/crostoolsv1/include:$CPATH
With regds
Gaurav
-----Original Message-----
From: Michael Eager [mailto:eager@xxxxxxxxxx]
Sent: Friday, March 08, 2013 10:21 PM
To: GUPTA, GAURAV G (GAURAV)
Cc: gcc-help@xxxxxxxxxxx
Subject: Re: need help on 4.4.6
On 03/07/2013 07:00 PM, GUPTA, GAURAV G (GAURAV) wrote:
>
> -----Original Message-----
> From: Michael Eager [mailto:eager@xxxxxxxxxx]
> Sent: Friday, March 08, 2013 7:01 AM
> To: GUPTA, GAURAV G (GAURAV)
> Cc: gcc-help@xxxxxxxxxxx
> Subject: Re: need help on 4.4.6
>
> On 03/07/2013 02:18 PM, GUPTA, GAURAV G (GAURAV) wrote:
>> Folks
>>
>> I really need some help on building gcc 4.4.6 .I have tried looking nearly all the gnu gcc material configure option.Nothing seems to be working out .
>> If some one can point me to some worth while material /notes for building it on linux without referring anything on the host .Even that will be great .
>
> It helps to know how you configured GCC.
>
> [Gaurav ] - This is how I configured my gcc
>
> $ /local/gagupta/gccfolder/crosscompile/gcc-4.4.6-20120305/configure --prefix=/local/gagupta/gccfolder/cross-tools --target=x86_64-unknown-linux-gnu --without-headers --with-newlib --disable-decimal-float --enable-languages=c --disable-threads --disable-libgomp --disable-libmudflap --disable-libssp --disable-shared
>
>
>> Here is the snapshot of the steps I am doing .I have my sysroot has /local/gagupta/gccfolder .I have extracted kernel and glibc-headers into sysroot .Now I am trying to build gcc in two step by a script .I keep hitting the wall now and then .
Your configure does not specify --sysroot=.
>>
>> 1.Some times it failes in stage2 not able to find some header files . where as the headers files are all good in sysroot .
>>
>> checking for suffix of object files... configure: error: in `/local/gagupta/gccfolder/crosscompileorig/gcc-build/x86_64-unknown-linux-gnu/libgcc':
>> configure: error: cannot compute suffix of object files: cannot compile
>> See `config.log' for more details.
>
> What does the config.log file in x86_64-unknown-linux-gnu/libgcc say?
>
> There will be a command which failed and a listing of the program it
> was executing. Sometimes it is clear why the command failed. Other
> times it may be useful to run the program by hand to see all error messages.
Did you look at libgcc/config.log?
>
>>
>> 2. Some time it failes trying to locate a directory /bin/sh /local/gagupta/gccfolder/crosscompileorig/gcc-4.4.6-20120305/mkinstalldirs /local/gagupta/gccfolder/crosstoolsv1 /local/gagupta/gccfolder/crosstoolsv1
>> /bin/sh: line 3: cd: ./fixincludes: No such file or directory
>> make[1]: *** [install-fixincludes] Error 1
>> make[1]: Leaving directory `/local/gagupta/gccfolder/crosscompileorig/gcc-build'
>> make: *** [install] Error 2
>
> Is there an error before this? Something which prevents fixincludes from
> being created?.
>
> [Gaurav ] Error in current scenario:-
>
> make[3]: Leaving directory `/local/gagupta/gccfolder/crosscompile/gcc-build'
> Comparing stages 2 and 3
> warning: gcc/cc1-checksum.o differs
> Bootstrap comparison failure!
> gcc/gcc.o differs
> make[2]: *** [compare] Error 1
> make[2]: Leaving directory `/local/gagupta/gccfolder/crosscompile/gcc-build'
> make[1]: *** [stage3-bubble] Error 2
> make[1]: Leaving directory `/local/gagupta/gccfolder/crosscompile/gcc-build'
> make: *** [all] Error 2
> make[1]: Entering directory `/local/gagupta/gccfolder/crosscompile/gcc-build'
> make[1]: Leaving directory `/local/gagupta/gccfolder/crosscompile/gcc-build'
> make[1]: Entering directory `/local/gagupta/gccfolder/crosscompile/gcc-build'
> /bin/sh /local/gagupta/gccfolder/crosscompile/gcc-4.4.6-20120305/mkinstalldirs /local/gagupta/gccfolder/cross-tools /local/gagupta/gccfolder/cross-tools
> /bin/sh: line 3: cd: ./fixincludes: No such file or directory
> make[1]: *** [install-fixincludes] Error 1
> make[1]: Leaving directory `/local/gagupta/gccfolder/crosscompile/gcc-build'
> make: *** [install] Error 2
Is there an error before this, that prevents fixincludes from being created?
You have an error: "Bootstrap comparison failure!". Resolve that before
working on other problems.
> ~
>
>> 3. Some time I see hell lot of directories mentiond in the below list and some time only 2 .based on changing the configure options .
>>
>> The following languages will be built: c,c++,fortran,java,objc
>> *** This configuration is not supported in the following subdirectories:
>> target-libada gnattools
>> (Any other directories should still work fine.)
>
>
>
> Not every directory is used for every build. In this case, the libada
> and gnattools directories are not needed unless you are building an
> Ada compiler.
>
> [Gaurav] - what configuration options are supported by all the libraries .it is enable static and enable shared .
Building static or dynamic libraries has nothing to do with
whether a gcc sub-directory is needed for your build.
In this build, you apparently have --languages=c,c++,fortran,java,objc.
Try working on one issue at a time. Post exactly what you are doing and
what the results are. Don't give "snapshots".
--
Michael Eager eager@xxxxxxxxxxxx
1960 Park Blvd., Palo Alto, CA 94306 650-325-8077
