Yi Tang writes: > Sorry for not clarifying the problem clearly. Both the rtos and the > application are compiled using gcc. > > The rtos and application code seems work ok. The only problem is that I > can't debug the assembly written HAL part of the rtos. > > I don't know whether my platform support DWARF debuginfo or not. How can I > find out? The toolchain I use is a bare c sparc-elf toolchain. > http://www.gaisler.com/cms/index.php?option=com_content&task=view&id=147&Itemid=31 > > Following is the command I use for compile, assemble and link: > > Thanks for your reply. > Regards, > Tony What does objdump -W uivsr.o do? > > sparc-elf-gcc -c -o > astest1.o -I/ecos/osek/dtimer2_install/include -msoft-float -O2 -g -Wall -Q > -msoft-float -Wall -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -Woverloaded-virtual > -g -O2 -ffunction-sections -fdata-sections -fno-rtti -fno-exceptions -fvtable-gc > -finit-priority astest1.c > > sparc-elf-gcc -c -o > uivsr.o -I/ecos/osek/dtimer2_install/include -msoft-float -O2 -g -Wall -Q -msoft-float > -Wall -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -Woverloaded-virtual > -g -O2 -ffunction-sections -fdata-sections -fno-rtti -fno-exceptions -fvtable-gc > -finit-priority uivsr.S > > sparc-elf-gcc -L/ecos/osek/dtimer2_install/lib -Ttarget.ld -nostdlib -g -Wl,--gc-sections > -Wl,-static -Q -msoft-float -g -nostdlib -fvtable-gc -Wl,--gc-sections -Wl,-static > -o astest1 astest1.o uivsr.o > > ----- Original Message ----- > From: "Andrew Haley" <aph-gcc@xxxxxxxxxxxxxxxxxxx> > To: "Yi Tang" <yitang@xxxxxxxxxxxxxx> > Cc: "GCC-HELP" <gcc-help@xxxxxxxxxxx> > Sent: Friday, November 09, 2007 7:16 PM > Subject: Re: asm debug problem > > > > Yi Tang writes: > > > Hello maintainter, > > > > > > I have got some trouble using gdb for my assemble source code. It seems > > > like > > > some gcc link problem. > > > > > > My code, written in asm and compiled by gcc, should be attached to an > > > rtos > > > library (ecos) to perform some test. However, I found it is not > > > possible to > > > debug the assemble source code under gdb. My assemble code, to build the > > > function (usr_interrupt_vsr()), is in a separate file called uivsr.S. > > > And it > > > is linked to the OS through a head file. However, when I run the gdb, it > > > goes to some other file in OS kernel, the clock.cxx (also wrong line > > > num, > > > I'm pretty sure no such function in this file). And the language is set > > > to > > > C++. I also tried gas as assembler, same situation. > > > > > > Following is the snapshot, hope you guys can give me some hints. > > > > You haven't really given us enough information. > > > > Firstly, does debugging usually work on your platform? > > > > Does your platform use DWARF debuginfo? What does > > > > objdump -W <file>.o > > > > do? > > > > What *exactly* was the command you used to assumble your file? > > > > Andrew. > > > >
