> -----Original Message----- > From: Denis Zaitsev [mailto:zzz@xxxxxxx] > Sent: 10 August 2004 09:08 > To: Bernardo Innocenti > Cc: Dave Korn; 'gcc'; 'gcc' > Subject: Re: problem in extended asm > > On Mon, Aug 09, 2004 at 08:13:00PM +0200, Bernardo Innocenti wrote: > > > > > > Dave Korn wrote: > > >>-----Original Message----- > > >>From: gcc-owner On Behalf Of Ankit Jain > > >>Sent: 09 August 2004 18:10 > > > > > > > > >>hi > > >> > > >>a simple question: why the followinf instruction > > >>dosent work in gcc > > >>for(i=0;i<8;i++) > > >>{ > > >>asm("movq i(%1),%%mm0 \n" > > >> "movq %%mm0,(%0) > > >> :"=r"(x) > > >> :"r"(m)); //m is an array > > >>} > > > > > > You forgot a closing quote. > > > > And a \t after the \n. Without it, the second movq would > > start at the beginning of the line and be interpreted as > > a label by the assembler. > > It's not true. It will be interpreted correctly. At least, for the > x86 assembler. OK then, is it because it writes to the output before consuming all the inputs? "Unless an output operand has the '&' constraint modifier, GCC may allocate it in the same register as an unrelated input operand, on the assumption the inputs are consumed before the outputs are produced. This assumption may be false if the assembler code actually consists of more than one instruction. In such a case, use '&' for each output operand that may not overlap an input. See Section 5.36.4 [Modifiers], page 225." cheers, DaveK -- Can't think of a witty .sigline today....
