Re: [PATCH v2] fstests: btrfs: redirect stdout of "btrfs subvolume snapshot" to fix output change

[Date Prev] [Date Next] [Thread Prev] [Thread Next] [Date Index] [Thread Index]





在 2024/4/8 14:16, Anand Jain 写道:
On 4/6/24 13:18, Qu Wenruo wrote:
[BUG]
All the touched test cases would fail after btrfs-progs commit
5f87b467a9e7 ("btrfs-progs: subvolume: output the prompt line only when
the ioctl succeeded") due to golden output mismatch.

[CAUSE]
Although the patch I sent to the mail list doesn't change the output at
all but only a timing change, David uses this patch to unify the output
of "btrfs subvolume create" and "btrfs subvolume snapshot".

Unfortunately this changes the output and causes mismatch with
golden output.

[FIX]
Just redirect stdout of "btrfs subvolume snapshot" to $seqres.full.
Any error from "btrfs subvolume" subgroup would lead to error messages
into stderr, and cause golden output mismatch.

This can be comprehensively greped by
'grep -IR "Create a" tests/btrfs/*.out' command.

In fact, we have around 274 "btrfs subvolume snapshot|create" calls in
the
existing test cases, meanwhile only around 61 calls are populating
golden output (22 for subvolume creation, and 39 for snapshot creation).

Thus majority of the snapshot/subvolume creation is not populating
golden output already.


While golden output is better verification method in terms of
accuracy, but, it falls short in verifying command exit codes.
I personally think the run_btrfs_progs approach is better for
'btrfs subvolume snapshot'. It allows us to verify the command
status without relying on the stdout.
But, past discussions favored the golden output verification
method instead of run_btrfs_progs.

I do no think the old conclusion is really fitting "btrfs subvolume"
command group.


Thanks, Anand


Signed-off-by: Qu Wenruo <wqu@xxxxxxxx>
---
This is just a quick fix for the test failures, if accepted, further
cleanup would be done for unnecessary golden output for "btrfs
subvolume" subgroup.

v2:
- Revert the change of btrfs/208.out
   That was part of the later cleanup, wrongly included in the fix.
---


  tests/btrfs/001     | 2 +-
  tests/btrfs/001.out | 1 -
  tests/btrfs/152     | 6 +++---
  tests/btrfs/152.out | 2 --
  tests/btrfs/168     | 4 ++--
  tests/btrfs/168.out | 2 --
  tests/btrfs/169     | 6 +++---
  tests/btrfs/169.out | 2 --
  tests/btrfs/170     | 3 +--
  tests/btrfs/170.out | 1 -
  tests/btrfs/187     | 5 +++--
  tests/btrfs/187.out | 3 +--
  tests/btrfs/188     | 6 +++---
  tests/btrfs/188.out | 2 --
  tests/btrfs/189     | 9 +++++----
  tests/btrfs/189.out | 2 --
  tests/btrfs/191     | 4 ++--
  tests/btrfs/191.out | 2 --
  tests/btrfs/200     | 8 ++++----
  tests/btrfs/200.out | 2 --
  tests/btrfs/202     | 2 +-
  tests/btrfs/202.out | 1 -
  tests/btrfs/203     | 8 ++++----
  tests/btrfs/203.out | 2 --
  tests/btrfs/226     | 2 +-
  tests/btrfs/226.out | 1 -
  tests/btrfs/276     | 2 +-
  tests/btrfs/276.out | 1 -
  tests/btrfs/280     | 3 ++-
  tests/btrfs/280.out | 1 -
  tests/btrfs/281     | 2 +-
  tests/btrfs/281.out | 1 -
  tests/btrfs/283     | 2 +-
  tests/btrfs/283.out | 1 -
  tests/btrfs/287     | 4 ++--
  tests/btrfs/287.out | 2 --
  tests/btrfs/293     | 6 ++++--
  tests/btrfs/293.out | 2 --
  tests/btrfs/300     | 2 +-
  tests/btrfs/300.out | 1 -
  tests/btrfs/302     | 2 +-
  tests/btrfs/302.out | 1 -
  tests/btrfs/314     | 2 +-
  tests/btrfs/314.out | 2 --
  44 files changed, 48 insertions(+), 77 deletions(-)

diff --git a/tests/btrfs/001 b/tests/btrfs/001
index 6c263999..7d79c454 100755
--- a/tests/btrfs/001
+++ b/tests/btrfs/001
@@ -26,7 +26,7 @@ dd if=/dev/zero of=$SCRATCH_MNT/foo bs=1M count=1 &>
/dev/null
  echo "List root dir"
  ls $SCRATCH_MNT
  echo "Creating snapshot of root dir"
-$BTRFS_UTIL_PROG subvolume snapshot $SCRATCH_MNT $SCRATCH_MNT/snap |
_filter_scratch
+$BTRFS_UTIL_PROG subvolume snapshot $SCRATCH_MNT $SCRATCH_MNT/snap >>
$seqres.full
  echo "List root dir after snapshot"
  ls $SCRATCH_MNT
  echo "List snapshot dir"
diff --git a/tests/btrfs/001.out b/tests/btrfs/001.out
index c782bde9..9b493fab 100644
--- a/tests/btrfs/001.out
+++ b/tests/btrfs/001.out
@@ -3,7 +3,6 @@ Creating file foo in root dir
  List root dir
  foo
  Creating snapshot of root dir
-Create a snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap'
  List root dir after snapshot
  foo
  snap
diff --git a/tests/btrfs/152 b/tests/btrfs/152
index 75f576c3..d26cd77a 100755
--- a/tests/btrfs/152
+++ b/tests/btrfs/152
@@ -32,12 +32,12 @@ touch $SCRATCH_MNT/subvol{1,2}/foo
  # Create base snapshots and send them
  $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT/subvol1 \
-    $SCRATCH_MNT/subvol1/.snapshots/1 | _filter_scratch
+    $SCRATCH_MNT/subvol1/.snapshots/1 >> $seqres.full
  $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT/subvol2 \
-    $SCRATCH_MNT/subvol2/.snapshots/1 | _filter_scratch
+    $SCRATCH_MNT/subvol2/.snapshots/1 >> $seqres.full
  for recv in recv1_1 recv1_2 recv2_1 recv2_2; do
      $BTRFS_UTIL_PROG send $SCRATCH_MNT/subvol1/.snapshots/1 2>
/dev/null | \
-        $BTRFS_UTIL_PROG receive $SCRATCH_MNT/${recv} | _filter_scratch
+        $BTRFS_UTIL_PROG receive $SCRATCH_MNT/${recv} >> $seqres.full
  done
  # Now do 10 loops of concurrent incremental send/receives
diff --git a/tests/btrfs/152.out b/tests/btrfs/152.out
index a95bb579..33dd36e8 100644
--- a/tests/btrfs/152.out
+++ b/tests/btrfs/152.out
@@ -5,8 +5,6 @@ Create subvolume 'SCRATCH_MNT/recv1_1'
  Create subvolume 'SCRATCH_MNT/recv1_2'
  Create subvolume 'SCRATCH_MNT/recv2_1'
  Create subvolume 'SCRATCH_MNT/recv2_2'
-Create a readonly snapshot of 'SCRATCH_MNT/subvol1' in
'SCRATCH_MNT/subvol1/.snapshots/1'
-Create a readonly snapshot of 'SCRATCH_MNT/subvol2' in
'SCRATCH_MNT/subvol2/.snapshots/1'
  At subvol 1
  At subvol 1
  At subvol 1
diff --git a/tests/btrfs/168 b/tests/btrfs/168
index acc58b51..97d00ba9 100755
--- a/tests/btrfs/168
+++ b/tests/btrfs/168
@@ -74,7 +74,7 @@ $BTRFS_UTIL_PROG property set $SCRATCH_MNT/sv1 ro false
  # Create a snapshot of the subvolume, to be used later as the parent
snapshot
  # for an incremental send operation.
  $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT/sv1
$SCRATCH_MNT/snap1 \
-    | _filter_scratch
+    >> $seqres.full
  # First do a full send of this snapshot.
  $FSSUM_PROG -A -f -w $send_files_dir/snap1.fssum $SCRATCH_MNT/snap1
@@ -88,7 +88,7 @@ $XFS_IO_PROG -c "pwrite -S 0x19 4K 8K"
$SCRATCH_MNT/sv1/baz >>$seqres.full
  # Create a second snapshot of the subvolume, to be used later as the
send
  # snapshot of an incremental send operation.
  $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT/sv1
$SCRATCH_MNT/snap2 \
-    | _filter_scratch
+    >> $seqres.full
  # Temporarily turn the second snapshot to read-write mode and then
open a file
  # descriptor on its foo file.
diff --git a/tests/btrfs/168.out b/tests/btrfs/168.out
index 6cfce8cd..f7eca2d7 100644
--- a/tests/btrfs/168.out
+++ b/tests/btrfs/168.out
@@ -1,9 +1,7 @@
  QA output created by 168
  Create subvolume 'SCRATCH_MNT/sv1'
  At subvol SCRATCH_MNT/sv1
-Create a readonly snapshot of 'SCRATCH_MNT/sv1' in 'SCRATCH_MNT/snap1'
  At subvol SCRATCH_MNT/snap1
-Create a readonly snapshot of 'SCRATCH_MNT/sv1' in 'SCRATCH_MNT/snap2'
  At subvol SCRATCH_MNT/snap2
  At subvol sv1
  OK
diff --git a/tests/btrfs/169 b/tests/btrfs/169
index 009fdaee..c215f281 100755
--- a/tests/btrfs/169
+++ b/tests/btrfs/169
@@ -43,8 +43,8 @@ $XFS_IO_PROG -f -c "falloc -k 0 4M" \
           -c "pwrite -S 0xea 0 1M" \
           $SCRATCH_MNT/foobar | _filter_xfs_io
-$BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT
$SCRATCH_MNT/snap1 2>&1 \
-    | _filter_scratch
+$BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/snap1 \
+    >> $seqres.full
  $BTRFS_UTIL_PROG send -f $send_files_dir/1.snap $SCRATCH_MNT/snap1
2>&1 \
      | _filter_scratch
@@ -54,7 +54,7 @@ $BTRFS_UTIL_PROG send -f $send_files_dir/1.snap
$SCRATCH_MNT/snap1 2>&1 \
  $XFS_IO_PROG -c "fpunch 1M 2M" $SCRATCH_MNT/foobar
  $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT
$SCRATCH_MNT/snap2 2>&1 \
-    | _filter_scratch
+    >> $seqres.full
  $BTRFS_UTIL_PROG send -p $SCRATCH_MNT/snap1 -f $send_files_dir/2.snap \
           $SCRATCH_MNT/snap2 2>&1 | _filter_scratch
diff --git a/tests/btrfs/169.out b/tests/btrfs/169.out
index ba77bf0a..a6df713a 100644
--- a/tests/btrfs/169.out
+++ b/tests/btrfs/169.out
@@ -1,9 +1,7 @@
  QA output created by 169
  wrote 1048576/1048576 bytes at offset 0
  XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap1'
  At subvol SCRATCH_MNT/snap1
-Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap2'
  At subvol SCRATCH_MNT/snap2
  File digest in the original filesystem:
  d31659e82e87798acd4669a1e0a19d4f  SCRATCH_MNT/snap2/foobar
diff --git a/tests/btrfs/170 b/tests/btrfs/170
index ab105d36..29a15162 100755
--- a/tests/btrfs/170
+++ b/tests/btrfs/170
@@ -45,8 +45,7 @@ echo "File digest after write:"
  md5sum $SCRATCH_MNT/foobar | _filter_scratch
  # Create a snapshot of the subvolume where our file is.
-$BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/snap
2>&1 \
-    | _filter_scratch
+$BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/snap
2>&1 >> $seqres.full
  # Cleanly unmount the filesystem.
  _scratch_unmount
diff --git a/tests/btrfs/170.out b/tests/btrfs/170.out
index 4c5fd87a..8ad959f3 100644
--- a/tests/btrfs/170.out
+++ b/tests/btrfs/170.out
@@ -3,6 +3,5 @@ wrote 131072/131072 bytes at offset 0
  XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
  File digest after write:
  85054e9e74bc3ae186d693890106b71f  SCRATCH_MNT/foobar
-Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap'
  File digest after mounting the filesystem again:
  85054e9e74bc3ae186d693890106b71f  SCRATCH_MNT/foobar
diff --git a/tests/btrfs/187 b/tests/btrfs/187
index d3cf05a1..86c411b6 100755
--- a/tests/btrfs/187
+++ b/tests/btrfs/187
@@ -152,7 +152,7 @@ done
  wait ${create_pids[@]}
  $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT
$SCRATCH_MNT/snap1 \
-    | _filter_scratch
+    >> $seqres.full
  # Add some more files, so that that are substantial differences
between the
  # two test snapshots used for an incremental send later.
@@ -184,7 +184,7 @@ done
  wait ${setxattr_pids[@]}
  $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT
$SCRATCH_MNT/snap2 \
-    | _filter_scratch
+    >> $seqres.full
  full_send_loop 5 &
  full_send_pid=$!
@@ -221,5 +221,6 @@ wait $balance_pid
  #
  _dmesg_since_test_start | grep -E -e '\bBTRFS error \(device .*?\):'
+echo "Silence is golden"
  status=0
  exit
diff --git a/tests/btrfs/187.out b/tests/btrfs/187.out
index ab522cfe..331a07c6 100644
--- a/tests/btrfs/187.out
+++ b/tests/btrfs/187.out
@@ -1,3 +1,2 @@
  QA output created by 187
-Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap1'
-Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap2'
+Silence is golden
diff --git a/tests/btrfs/188 b/tests/btrfs/188
index fcaf84b1..1578095a 100755
--- a/tests/btrfs/188
+++ b/tests/btrfs/188
@@ -44,8 +44,8 @@ _scratch_mount
  $XFS_IO_PROG -f -c "pwrite -S 0xab 0 500K" $SCRATCH_MNT/foobar |
_filter_xfs_io
  $XFS_IO_PROG -c "falloc -k 1200K 800K" $SCRATCH_MNT/foobar
-$BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/base
2>&1 \
-    | _filter_scratch
+$BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/base \
+    >> $seqres.full
  $BTRFS_UTIL_PROG send -f $send_files_dir/1.snap $SCRATCH_MNT/base
2>&1 \
      | _filter_scratch
@@ -54,7 +54,7 @@ $BTRFS_UTIL_PROG send -f $send_files_dir/1.snap
$SCRATCH_MNT/base 2>&1 \
  $XFS_IO_PROG -c "fpunch 0 500K" $SCRATCH_MNT/foobar
  $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT
$SCRATCH_MNT/incr 2>&1 \
-    | _filter_scratch
+    >> $seqres.full
  $BTRFS_UTIL_PROG send -p $SCRATCH_MNT/base -f $send_files_dir/2.snap \
      $SCRATCH_MNT/incr 2>&1 | _filter_scratch
diff --git a/tests/btrfs/188.out b/tests/btrfs/188.out
index 260988e6..99eb3133 100644
--- a/tests/btrfs/188.out
+++ b/tests/btrfs/188.out
@@ -1,9 +1,7 @@
  QA output created by 188
  wrote 512000/512000 bytes at offset 0
  XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/base'
  At subvol SCRATCH_MNT/base
-Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/incr'
  At subvol SCRATCH_MNT/incr
  File digest in the original filesystem:
  816df6f64deba63b029ca19d880ee10a  SCRATCH_MNT/incr/foobar
diff --git a/tests/btrfs/189 b/tests/btrfs/189
index ec6e56fa..618de266 100755
--- a/tests/btrfs/189
+++ b/tests/btrfs/189
@@ -45,8 +45,9 @@ $XFS_IO_PROG -f -c "pwrite -S 0xc7 0 2M"
$SCRATCH_MNT/bar | _filter_xfs_io
  $XFS_IO_PROG -f -c "pwrite -S 0x4d 0 2M" $SCRATCH_MNT/baz |
_filter_xfs_io
  $XFS_IO_PROG -f -c "pwrite -S 0xe2 0 2M" $SCRATCH_MNT/zoo |
_filter_xfs_io
-$BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/base
2>&1 \
-    | _filter_scratch
+$BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/base \
+    >> $seqres.full
+
  $BTRFS_UTIL_PROG send -f $send_files_dir/1.snap $SCRATCH_MNT/base
2>&1 \
      | _filter_scratch
@@ -70,8 +71,8 @@ $XFS_IO_PROG -c "reflink $SCRATCH_MNT/bar 1600K 0
128K" $SCRATCH_MNT/zoo \
  # operations.
  $XFS_IO_PROG -c "truncate 710K" $SCRATCH_MNT/bar
-$BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/incr
2>&1 \
-    | _filter_scratch
+$BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/incr \
+    >> $seqres.full
  $BTRFS_UTIL_PROG send -p $SCRATCH_MNT/base -f $send_files_dir/2.snap \
      $SCRATCH_MNT/incr 2>&1 | _filter_scratch
diff --git a/tests/btrfs/189.out b/tests/btrfs/189.out
index 79c70b03..b4984d37 100644
--- a/tests/btrfs/189.out
+++ b/tests/btrfs/189.out
@@ -7,13 +7,11 @@ wrote 2097152/2097152 bytes at offset 0
  XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
  wrote 2097152/2097152 bytes at offset 0
  XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/base'
  At subvol SCRATCH_MNT/base
  linked 131072/131072 bytes at offset 655360
  XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
  linked 131072/131072 bytes at offset 0
  XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/incr'
  At subvol SCRATCH_MNT/incr
  At subvol base
  At snapshot incr
diff --git a/tests/btrfs/191 b/tests/btrfs/191
index 3c565d0a..c01abb5a 100755
--- a/tests/btrfs/191
+++ b/tests/btrfs/191
@@ -44,7 +44,7 @@ $XFS_IO_PROG -c "pwrite -S 0xb8 512K 512K"
$SCRATCH_MNT/foo | _filter_xfs_io
  # Create the base snapshot and the parent send stream from it.
  $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT
$SCRATCH_MNT/mysnap1 \
-    | _filter_scratch
+    >> $seqres.full
  $BTRFS_UTIL_PROG send -f $send_files_dir/1.snap $SCRATCH_MNT/mysnap1
2>&1 \
      | _filter_scratch
@@ -55,7 +55,7 @@ $XFS_IO_PROG -f -c "pwrite -S 0xb8 0 1M"
$SCRATCH_MNT/bar | _filter_xfs_io
  # Create the second snapshot, used for the incremental send, before
doing the
  # file deduplication.
  $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT
$SCRATCH_MNT/mysnap2 \
-    | _filter_scratch
+    >> $seqres.full
  # Now before creating the incremental send stream:
  #
diff --git a/tests/btrfs/191.out b/tests/btrfs/191.out
index 4269803c..471c05da 100644
--- a/tests/btrfs/191.out
+++ b/tests/btrfs/191.out
@@ -3,11 +3,9 @@ wrote 524288/524288 bytes at offset 0
  XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
  wrote 524288/524288 bytes at offset 524288
  XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/mysnap1'
  At subvol SCRATCH_MNT/mysnap1
  wrote 1048576/1048576 bytes at offset 0
  XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/mysnap2'
  deduped 524288/524288 bytes at offset 0
  XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
  deduped 524288/524288 bytes at offset 524288
diff --git a/tests/btrfs/200 b/tests/btrfs/200
index 5ce3775f..520e7f21 100755
--- a/tests/btrfs/200
+++ b/tests/btrfs/200
@@ -51,8 +51,8 @@ $XFS_IO_PROG -c "reflink $SCRATCH_MNT/foo 0 64K 64K"
$SCRATCH_MNT/foo \
  $XFS_IO_PROG -f -c "pwrite -S 0xc7 -b 64K 0 64K" $SCRATCH_MNT/bar \
      | _filter_xfs_io
-$BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/base
2>&1 \
-    | _filter_scratch
+$BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/base \
+    >> $seqres.full
  $BTRFS_UTIL_PROG send -f $send_files_dir/1.snap $SCRATCH_MNT/base
2>&1 \
      | _filter_scratch
@@ -63,8 +63,8 @@ $BTRFS_UTIL_PROG send -f $send_files_dir/1.snap
$SCRATCH_MNT/base 2>&1 \
  $XFS_IO_PROG -c "reflink $SCRATCH_MNT/bar 0 64K 64K" $SCRATCH_MNT/bar \
      | _filter_xfs_io
-$BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/incr
2>&1 \
-    | _filter_scratch
+$BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/incr \
+    >> $seqres.full
  $BTRFS_UTIL_PROG send -p $SCRATCH_MNT/base -f $send_files_dir/2.snap \
      $SCRATCH_MNT/incr 2>&1 | _filter_scratch
diff --git a/tests/btrfs/200.out b/tests/btrfs/200.out
index 3eec567e..306d9b24 100644
--- a/tests/btrfs/200.out
+++ b/tests/btrfs/200.out
@@ -5,11 +5,9 @@ linked 65536/65536 bytes at offset 65536
  XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
  wrote 65536/65536 bytes at offset 0
  XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/base'
  At subvol SCRATCH_MNT/base
  linked 65536/65536 bytes at offset 65536
  XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/incr'
  At subvol SCRATCH_MNT/incr
  At subvol base
  At snapshot incr
diff --git a/tests/btrfs/202 b/tests/btrfs/202
index 5f0429f1..1c8c5647 100755
--- a/tests/btrfs/202
+++ b/tests/btrfs/202
@@ -28,7 +28,7 @@ _scratch_mount
  $BTRFS_UTIL_PROG subvolume create $SCRATCH_MNT/a | _filter_scratch
  $BTRFS_UTIL_PROG subvolume create $SCRATCH_MNT/a/b | _filter_scratch
  $BTRFS_UTIL_PROG subvolume snapshot $SCRATCH_MNT/a $SCRATCH_MNT/c \
-    | _filter_scratch
+    >> $seqres.full
  # Need the dummy entry created so that we get the invalid removal
when we rmdir
  ls $SCRATCH_MNT/c/b
diff --git a/tests/btrfs/202.out b/tests/btrfs/202.out
index 7f33d49f..28d52e3f 100644
--- a/tests/btrfs/202.out
+++ b/tests/btrfs/202.out
@@ -1,4 +1,3 @@
  QA output created by 202
  Create subvolume 'SCRATCH_MNT/a'
  Create subvolume 'SCRATCH_MNT/a/b'
-Create a snapshot of 'SCRATCH_MNT/a' in 'SCRATCH_MNT/c'
diff --git a/tests/btrfs/203 b/tests/btrfs/203
index e506118e..e4ec533f 100755
--- a/tests/btrfs/203
+++ b/tests/btrfs/203
@@ -43,8 +43,8 @@ _scratch_mount
  # file in the parent snapshot.
  $XFS_IO_PROG -f -c "pwrite -S 0xf1 0 64K" $SCRATCH_MNT/foobar |
_filter_xfs_io
-$BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/base
2>&1 \
-    | _filter_scratch
+$BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/base \
+    >> $seqres.full
  $BTRFS_UTIL_PROG send -f $send_files_dir/1.snap $SCRATCH_MNT/base
2>&1 \
      | _filter_scratch
@@ -69,8 +69,8 @@ $XFS_IO_PROG -c "pwrite -S 0xab 512K 64K" \
           -c "reflink $SCRATCH_MNT/foobar 448K 192K 192K" \
           $SCRATCH_MNT/foobar | _filter_xfs_io
-$BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/incr
2>&1 \
-    | _filter_scratch
+$BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/incr \
+    >> $seqres.full
  $BTRFS_UTIL_PROG send -p $SCRATCH_MNT/base -f $send_files_dir/2.snap \
           $SCRATCH_MNT/incr 2>&1 | _filter_scratch
diff --git a/tests/btrfs/203.out b/tests/btrfs/203.out
index 58739a98..67ec1bd7 100644
--- a/tests/btrfs/203.out
+++ b/tests/btrfs/203.out
@@ -1,7 +1,6 @@
  QA output created by 203
  wrote 65536/65536 bytes at offset 0
  XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/base'
  At subvol SCRATCH_MNT/base
  wrote 65536/65536 bytes at offset 524288
  XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -15,7 +14,6 @@ wrote 65536/65536 bytes at offset 786432
  XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
  linked 196608/196608 bytes at offset 196608
  XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/incr'
  At subvol SCRATCH_MNT/incr
  File foobar digest in the original filesystem:
  2b76b23b62fdbbbcae1ee37eec84fd7d
diff --git a/tests/btrfs/226 b/tests/btrfs/226
index 7034fcc7..017ff479 100755
--- a/tests/btrfs/226
+++ b/tests/btrfs/226
@@ -51,7 +51,7 @@ $XFS_IO_PROG -s -c "pwrite -S 0xab 0 64K" \
           $SCRATCH_MNT/f2 | _filter_xfs_io
  $BTRFS_UTIL_PROG subvolume snapshot $SCRATCH_MNT $SCRATCH_MNT/snap \
-    | _filter_scratch
+    >> $seqres.full
  # Write into the range of the first extent so that that range no
longer has a
  # shared extent.
diff --git a/tests/btrfs/226.out b/tests/btrfs/226.out
index c63982b0..815217ac 100644
--- a/tests/btrfs/226.out
+++ b/tests/btrfs/226.out
@@ -13,7 +13,6 @@ wrote 65536/65536 bytes at offset 0
  XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
  wrote 65536/65536 bytes at offset 65536
  XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-Create a snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap'
  wrote 65536/65536 bytes at offset 0
  XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
  pwrite: Resource temporarily unavailable
diff --git a/tests/btrfs/276 b/tests/btrfs/276
index f15f2082..b484d20e 100755
--- a/tests/btrfs/276
+++ b/tests/btrfs/276
@@ -105,7 +105,7 @@ sync
  echo "Number of non-shared extents in the whole file:
$(count_not_shared_extents)"
  # Creating a snapshot.
-$BTRFS_UTIL_PROG subvolume snapshot $SCRATCH_MNT $SCRATCH_MNT/snap |
_filter_scratch
+$BTRFS_UTIL_PROG subvolume snapshot $SCRATCH_MNT $SCRATCH_MNT/snap >>
$seqres.full
  # We have a snapshot, so now all extents should be reported as shared.
  echo "Number of shared extents in the whole file:
$(count_shared_extents)"
diff --git a/tests/btrfs/276.out b/tests/btrfs/276.out
index 352e06b4..e30ca188 100644
--- a/tests/btrfs/276.out
+++ b/tests/btrfs/276.out
@@ -1,6 +1,5 @@
  QA output created by 276
  Number of non-shared extents in the whole file: 2000
-Create a snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap'
  Number of shared extents in the whole file: 2000
  wrote 65536/65536 bytes at offset 524288
  XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
diff --git a/tests/btrfs/280 b/tests/btrfs/280
index fc049adb..41d3caa7 100755
--- a/tests/btrfs/280
+++ b/tests/btrfs/280
@@ -37,7 +37,8 @@ _scratch_mount -o compress
  $XFS_IO_PROG -f -c "pwrite -b 1M 0 128M" $SCRATCH_MNT/foo |
_filter_xfs_io
  # Create a RW snapshot of the default subvolume.
-$BTRFS_UTIL_PROG subvolume snapshot $SCRATCH_MNT $SCRATCH_MNT/snap |
_filter_scratch
+$BTRFS_UTIL_PROG subvolume snapshot $SCRATCH_MNT $SCRATCH_MNT/snap \
+    >> $seqres.full
  echo
  echo "File foo fiemap before COWing extent:"
diff --git a/tests/btrfs/280.out b/tests/btrfs/280.out
index 5371f3b0..c5ecf688 100644
--- a/tests/btrfs/280.out
+++ b/tests/btrfs/280.out
@@ -1,7 +1,6 @@
  QA output created by 280
  wrote 134217728/134217728 bytes at offset 0
  XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-Create a snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap'
  File foo fiemap before COWing extent:
diff --git a/tests/btrfs/281 b/tests/btrfs/281
index ddc7d9e8..c9efeb67 100755
--- a/tests/btrfs/281
+++ b/tests/btrfs/281
@@ -53,7 +53,7 @@ $XFS_IO_PROG -c "reflink $SCRATCH_MNT/bar 0 0 64K"
$SCRATCH_MNT/foo \
  echo "Creating snapshot and a send stream for it..."
  $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/snap \
-    | _filter_scratch
+    >> $seqres.full
  $BTRFS_UTIL_PROG send --compressed-data -f $send_stream
$SCRATCH_MNT/snap 2>&1 \
      | _filter_scratch
diff --git a/tests/btrfs/281.out b/tests/btrfs/281.out
index 2585e3e5..0b775689 100644
--- a/tests/btrfs/281.out
+++ b/tests/btrfs/281.out
@@ -6,7 +6,6 @@ XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX
ops/sec)
  linked 65536/65536 bytes at offset 0
  XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
  Creating snapshot and a send stream for it...
-Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap'
  At subvol SCRATCH_MNT/snap
  Creating a new filesystem to receive the send stream...
  At subvol snap
diff --git a/tests/btrfs/283 b/tests/btrfs/283
index 118df08b..2ddd95bc 100755
--- a/tests/btrfs/283
+++ b/tests/btrfs/283
@@ -58,7 +58,7 @@ $XFS_IO_PROG -c "pwrite -S 0xcd -b 64K 64K 64K"
$SCRATCH_MNT/foo | _filter_xfs_i
  echo "Creating snapshot and a send stream for it..."
  $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/snap \
-    | _filter_scratch
+    >> $seqres.full
  $BTRFS_UTIL_PROG send -f $send_stream $SCRATCH_MNT/snap 2>&1 |
_filter_scratch
diff --git a/tests/btrfs/283.out b/tests/btrfs/283.out
index 286dae33..7c7d9f73 100644
--- a/tests/btrfs/283.out
+++ b/tests/btrfs/283.out
@@ -4,7 +4,6 @@ XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX
ops/sec)
  wrote 65536/65536 bytes at offset 65536
  XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
  Creating snapshot and a send stream for it...
-Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap'
  At subvol SCRATCH_MNT/snap
  Creating a new filesystem to receive the send stream...
  At subvol snap
diff --git a/tests/btrfs/287 b/tests/btrfs/287
index 64e6ef35..33f4a341 100755
--- a/tests/btrfs/287
+++ b/tests/btrfs/287
@@ -112,9 +112,9 @@ query_logical_ino -o $bytenr
  # Now create two snapshots and then do some queries.
  $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT
$SCRATCH_MNT/snap1 \
-    | _filter_scratch
+    >> $seqres.full
  $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT
$SCRATCH_MNT/snap2 \
-    | _filter_scratch
+    >> $seqres.full
  snap1_id=$(_btrfs_get_subvolid $SCRATCH_MNT snap1)
  snap2_id=$(_btrfs_get_subvolid $SCRATCH_MNT snap2)
diff --git a/tests/btrfs/287.out b/tests/btrfs/287.out
index 30eac8fa..4814594f 100644
--- a/tests/btrfs/287.out
+++ b/tests/btrfs/287.out
@@ -41,8 +41,6 @@ resolve first extent +3M offset with ignore offset
option:
  inode 257 offset 16777216 root 5
  inode 257 offset 8388608 root 5
  inode 257 offset 2097152 root 5
-Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap1'
-Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap2'
  resolve first extent:
  inode 257 offset 16777216 snap2
  inode 257 offset 8388608 snap2
diff --git a/tests/btrfs/293 b/tests/btrfs/293
index 06f96dc4..a6bd68e6 100755
--- a/tests/btrfs/293
+++ b/tests/btrfs/293
@@ -32,9 +32,11 @@ swap_file="$SCRATCH_MNT/swapfile"
  _format_swapfile $swap_file $(($(_get_page_size) * 64)) >> $seqres.full
  echo "Creating first snapshot..."
-$BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT
$SCRATCH_MNT/snap1 | _filter_scratch
+$BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/snap1 \
+    >> $seqres.full
  echo "Creating second snapshot..."
-$BTRFS_UTIL_PROG subvolume snapshot $SCRATCH_MNT $SCRATCH_MNT/snap2 |
_filter_scratch
+$BTRFS_UTIL_PROG subvolume snapshot $SCRATCH_MNT $SCRATCH_MNT/snap2 \
+    >> $seqres.full
  echo "Activating swap file... (should fail due to snapshots)"
  _swapon_file $swap_file 2>&1 | _filter_scratch
diff --git a/tests/btrfs/293.out b/tests/btrfs/293.out
index fd04ac91..5da7accc 100644
--- a/tests/btrfs/293.out
+++ b/tests/btrfs/293.out
@@ -1,8 +1,6 @@
  QA output created by 293
  Creating first snapshot...
-Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap1'
  Creating second snapshot...
-Create a snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap2'
  Activating swap file... (should fail due to snapshots)
  swapon: SCRATCH_MNT/swapfile: swapon failed: Invalid argument
  Deleting first snapshot...
diff --git a/tests/btrfs/300 b/tests/btrfs/300
index 8a0eaecf..4ea22a01 100755
--- a/tests/btrfs/300
+++ b/tests/btrfs/300
@@ -43,7 +43,7 @@ $BTRFS_UTIL_PROG subvolume create subvol;
  touch subvol/{1,2,3};
  $BTRFS_UTIL_PROG subvolume create subvol/subsubvol;
  touch subvol/subsubvol/{4,5,6};
-$BTRFS_UTIL_PROG subvolume snapshot subvol snapshot;
+$BTRFS_UTIL_PROG subvolume snapshot subvol snapshot > /dev/null;
  "
  find $test_dir/. -printf "%M %u %g ./%P\n"
diff --git a/tests/btrfs/300.out b/tests/btrfs/300.out
index 6e94447e..8611f606 100644
--- a/tests/btrfs/300.out
+++ b/tests/btrfs/300.out
@@ -1,7 +1,6 @@
  QA output created by 300
  Create subvolume './subvol'
  Create subvolume 'subvol/subsubvol'
-Create a snapshot of 'subvol' in './snapshot'
  drwxr-xr-x fsgqa fsgqa ./
  drwxr-xr-x fsgqa fsgqa ./subvol
  -rw-r--r-- fsgqa fsgqa ./subvol/1
diff --git a/tests/btrfs/302 b/tests/btrfs/302
index f3e6044b..5dcd5295 100755
--- a/tests/btrfs/302
+++ b/tests/btrfs/302
@@ -46,7 +46,7 @@ $FSSUM_PROG -A -f -w $fssum_file $SCRATCH_MNT/subvol
  # Now create a snapshot of the subvolume and make it accessible from
within the
  # subvolume.
  $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT/subvol \
-         $SCRATCH_MNT/subvol/snap | _filter_scratch
+         $SCRATCH_MNT/subvol/snap >> $seqres.full
  # Now unmount and mount again the fs. We want to verify we are able
to read all
  # metadata for the snapshot from disk (no IO failures, etc).
diff --git a/tests/btrfs/302.out b/tests/btrfs/302.out
index 8770aefc..e89d1297 100644
--- a/tests/btrfs/302.out
+++ b/tests/btrfs/302.out
@@ -1,4 +1,3 @@
  QA output created by 302
  Create subvolume 'SCRATCH_MNT/subvol'
-Create a readonly snapshot of 'SCRATCH_MNT/subvol' in
'SCRATCH_MNT/subvol/snap'
  OK
diff --git a/tests/btrfs/314 b/tests/btrfs/314
index 887cb69e..719a930a 100755
--- a/tests/btrfs/314
+++ b/tests/btrfs/314
@@ -43,7 +43,7 @@ send_receive_tempfsid()
      $XFS_IO_PROG -fc 'pwrite -S 0x61 0 9000' ${src}/foo |
_filter_xfs_io
      $BTRFS_UTIL_PROG subvolume snapshot -r ${src} ${src}/snap1 | \
-                        _filter_testdir_and_scratch
+        >> $seqres.full
      echo Send ${src} | _filter_testdir_and_scratch
      $BTRFS_UTIL_PROG send -f ${sendfile} ${src}/snap1 2>&1 | \
diff --git a/tests/btrfs/314.out b/tests/btrfs/314.out
index 21963899..8a311671 100644
--- a/tests/btrfs/314.out
+++ b/tests/btrfs/314.out
@@ -3,7 +3,6 @@ QA output created by 314
  From non-tempfsid SCRATCH_MNT to tempfsid TEST_DIR/314/tempfsid_mnt
  wrote 9000/9000 bytes at offset 0
  XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-Create a readonly snapshot of 'SCRATCH_MNT' in 'SCRATCH_MNT/snap1'
  Send SCRATCH_MNT
  At subvol SCRATCH_MNT/snap1
  Receive TEST_DIR/314/tempfsid_mnt
@@ -14,7 +13,6 @@ Recv:    42d69d1a6d333a7ebdf64792a555e392
TEST_DIR/314/tempfsid_mnt/snap1/foo
  From tempfsid TEST_DIR/314/tempfsid_mnt to non-tempfsid SCRATCH_MNT
  wrote 9000/9000 bytes at offset 0
  XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-Create a readonly snapshot of 'TEST_DIR/314/tempfsid_mnt' in
'TEST_DIR/314/tempfsid_mnt/snap1'
  Send TEST_DIR/314/tempfsid_mnt
  At subvol TEST_DIR/314/tempfsid_mnt/snap1
  Receive SCRATCH_MNT







[Index of Archives]     [Linux Filesystems Development]     [Linux NFS]     [Linux NILFS]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux