This patch moves xfs/087 to shared/.
Signed-off-by: Jaegeuk Kim <jaegeuk@xxxxxxxxxx>
---
tests/shared/087 | 174 ++++++++++++++
tests/shared/087.out.f2fs | 583 ++++++++++++++++++++++++++++++++++++++++++++++
tests/shared/087.out.xfs | 389 +++++++++++++++++++++++++++++++
tests/shared/group | 1 +
tests/xfs/087 | 174 --------------
tests/xfs/087.out.f2fs | 583 ----------------------------------------------
tests/xfs/087.out.xfs | 389 -------------------------------
tests/xfs/group | 1 -
8 files changed, 1147 insertions(+), 1147 deletions(-)
create mode 100755 tests/shared/087
create mode 100644 tests/shared/087.out.f2fs
create mode 100644 tests/shared/087.out.xfs
delete mode 100755 tests/xfs/087
delete mode 100644 tests/xfs/087.out.f2fs
delete mode 100644 tests/xfs/087.out.xfs
diff --git a/tests/shared/087 b/tests/shared/087
new file mode 100755
index 0000000..9017bfd
--- /dev/null
+++ b/tests/shared/087
@@ -0,0 +1,174 @@
+#! /bin/bash
+# FS QA Test No. 087
+#
+# * like 086 but want to create more/different kinds of metadata
+# and so will use fsstress
+# * also can interrupt metadata with godown
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2000-2004 Silicon Graphics, Inc. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#
+#-----------------------------------------------------------------------
+#
+
+seqfull=$0
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "rm -f $tmp.*; exit \$status" 0 1 2 3 15
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/log
+. ./common/quota
+
+_do_meta()
+{
+ out=$SCRATCH_MNT/fsstress
+ count=10000
+ param="-p 4 -z -f rmdir=10 -f link=10 -f creat=10 -f mkdir=10 \
+ -f rename=30 -f stat=30 -f unlink=30 -f truncate=20"
+ _echofull "calling fsstress $param -m8 -n $count"
+ FSSTRESS_ARGS=`_scale_fsstress_args $param $FSSTRESS_AVOID -m 8 -n $count -d $out`
+ if ! $FSSTRESS_PROG $FSSTRESS_ARGS >>$seqres.full 2>&1
+ then
+ _echofull "fsstress failed"
+ fi
+}
+
+# real QA test starts here
+_supported_fs xfs f2fs
+_supported_os IRIX Linux
+
+rm -f $seqres.full $tmp.*
+_require_scratch
+
+if [ "$FSTYP" == "xfs" ]; then
+ _require_v2log
+ _require_xfs_quota
+fi
+
+echo "*** init FS"
+umount $SCRATCH_DEV >/dev/null 2>&1
+
+cat >$tmp.seq.params.xfs <<EOF
+# mkfs-opt mount-opt
+# ------------------------------
+ version=2 uquota,logbsize=32k
+ version=2,su=4096 uquota,logbsize=32k
+ version=2,su=32768 uquota,logbsize=32k
+ version=2 uquota,logbsize=64k
+ version=2,su=64k uquota,logbsize=64k
+ version=2 uquota,logbsize=128k
+ version=2,su=128k uquota,logbsize=128k
+ version=2 uquota,logbsize=256k
+ version=2,su=256k uquota,logbsize=256k
+EOF
+
+cat >$tmp.seq.params.f2fs <<EOF
+# mkfs-opt mount-opt
+# ---------------------------
+ test1 active_logs=6,background_gc=off
+ test2 active_logs=6,background_gc=off,inline_data
+ test3 active_logs=6,background_gc=off,inline_dentry
+ test4 active_logs=6,background_gc=off,inline_dentry,inline_data
+ test5 active_logs=6,background_gc=off,disable_roll_forward
+ test6 active_logs=4,background_gc=off
+ test7 active_logs=2,background_gc=off
+EOF
+
+cat $tmp.seq.params.$FSTYP > $tmp.seq.params
+
+# link correct .out file
+_link_out_file_fs $seq.out $seqfull.out
+
+cat $tmp.seq.params \
+| while read mkfs mnt restofline
+do
+ if [ "$mkfs" = "#" ]; then
+ continue
+ fi
+
+ echo "--- mkfs=$mkfs, mnt=$mnt ---"
+ export MKFS_OPTIONS="-l $mkfs"
+ export MOUNT_OPTIONS="-o $mnt"
+
+ # mkfs the FS
+ _echofull "mkfs"
+ _scratch_mkfs >>$seqres.full 2>&1
+ if [ $? -ne 0 ] ; then
+ _echofull "mkfs failed: $MKFS_OPTIONS"
+ continue
+ fi
+
+ # mount the FS
+ _echofull "mount"
+ if ! _scratch_mount >>$seqres.full 2>&1; then
+ _echofull "mount failed: $MOUNT_OPTIONS"
+ continue
+ fi
+
+ # create the metadata
+ _do_meta
+
+ # check before on what FS should look like
+ _echofull "ls -RF SCRATCH_MNT"
+ ls -RF $SCRATCH_MNT >$tmp.ls1
+
+ _echofull "godown"
+ src/godown -v -f $SCRATCH_MNT >> $seqres.full
+
+ _echofull "unmount"
+ umount $SCRATCH_DEV >>$seqres.full 2>&1 \
+ || _fail "umount failed"
+
+ _echofull "logprint after going down..."
+ _print_logstate
+
+ _full "logprint headers"
+ _scratch_xfs_logprint -n >>$seqres.full 2>&1
+
+ _echofull "mount with replay"
+ _scratch_mount >>$seqres.full 2>&1 \
+ || _fail "mount failed: $MOUNT_OPTIONS"
+
+ # check on what FS looks like after log recovery
+ _echofull "ls -RF SCRATCH_MNT"
+ ls -RF $SCRATCH_MNT >$tmp.ls2
+
+ _echofull "diff ls before and after"
+ diff -us $tmp.ls1 $tmp.ls2 | sed "s#$tmp#TMP#g"
+
+ _echofull "unmount"
+ umount $SCRATCH_MNT
+
+ _echofull "logprint after mount and replay..."
+ _print_logstate
+
+ if _check_scratch_fs; then
+ _echofull "filesystem is checked ok"
+ else
+ _echofull "filesystem is NOT ok"
+ fi
+done
+
+status=0
+exit
diff --git a/tests/shared/087.out.f2fs b/tests/shared/087.out.f2fs
new file mode 100644
index 0000000..f84d6cf
--- /dev/null
+++ b/tests/shared/087.out.f2fs
@@ -0,0 +1,583 @@
+QA output created by 087
+*** init FS
+--- mkfs=test1, mnt=active_logs=6,background_gc=off ---
+
+*** mkfs ***
+
+
+*** mount ***
+
+
+*** calling fsstress -p 4 -z -f rmdir=10 -f link=10 -f creat=10 -f mkdir=10 -f rename=30 -f stat=30 -f unlink=30 -f truncate=20 -m8 -n 10000 ***
+
+
+*** ls -RF SCRATCH_MNT ***
+
+
+*** godown ***
+
+
+*** unmount ***
+
+
+*** logprint after going down... ***
+
+ external log device not specified
+
+Usage: xfs_logprint [options...] <device>
+
+Options:
+ -c try to continue if error found in log
+ -C <filename> copy the log from the filesystem to filename
+ -d dump the log in log-record format
+ -e exit when an error is found in the log
+ -f specified device is actually a file
+ -l <device> filename of external log
+ -n don't try and interpret log data
+ -o print buffer data in hex
+ -s <start blk> block # to start printing
+ -v print "overwrite" data
+ -t print out transactional view
+ -b in transactional view, extract buffer info
+ -i in transactional view, extract inode info
+ -q in transactional view, extract quota info
+ -D print only data; no decoding
+ -V print version information
+
+*** mount with replay ***
+
+
+*** ls -RF SCRATCH_MNT ***
+
+
+*** diff ls before and after ***
+
+Files TMP.ls1 and TMP.ls2 are identical
+
+*** unmount ***
+
+
+*** logprint after mount and replay... ***
+
+ external log device not specified
+
+Usage: xfs_logprint [options...] <device>
+
+Options:
+ -c try to continue if error found in log
+ -C <filename> copy the log from the filesystem to filename
+ -d dump the log in log-record format
+ -e exit when an error is found in the log
+ -f specified device is actually a file
+ -l <device> filename of external log
+ -n don't try and interpret log data
+ -o print buffer data in hex
+ -s <start blk> block # to start printing
+ -v print "overwrite" data
+ -t print out transactional view
+ -b in transactional view, extract buffer info
+ -i in transactional view, extract inode info
+ -q in transactional view, extract quota info
+ -D print only data; no decoding
+ -V print version information
+
+*** filesystem is checked ok ***
+
+--- mkfs=test2, mnt=active_logs=6,background_gc=off,inline_data ---
+
+*** mkfs ***
+
+
+*** mount ***
+
+
+*** calling fsstress -p 4 -z -f rmdir=10 -f link=10 -f creat=10 -f mkdir=10 -f rename=30 -f stat=30 -f unlink=30 -f truncate=20 -m8 -n 10000 ***
+
+
+*** ls -RF SCRATCH_MNT ***
+
+
+*** godown ***
+
+
+*** unmount ***
+
+
+*** logprint after going down... ***
+
+ external log device not specified
+
+Usage: xfs_logprint [options...] <device>
+
+Options:
+ -c try to continue if error found in log
+ -C <filename> copy the log from the filesystem to filename
+ -d dump the log in log-record format
+ -e exit when an error is found in the log
+ -f specified device is actually a file
+ -l <device> filename of external log
+ -n don't try and interpret log data
+ -o print buffer data in hex
+ -s <start blk> block # to start printing
+ -v print "overwrite" data
+ -t print out transactional view
+ -b in transactional view, extract buffer info
+ -i in transactional view, extract inode info
+ -q in transactional view, extract quota info
+ -D print only data; no decoding
+ -V print version information
+
+*** mount with replay ***
+
+
+*** ls -RF SCRATCH_MNT ***
+
+
+*** diff ls before and after ***
+
+Files TMP.ls1 and TMP.ls2 are identical
+
+*** unmount ***
+
+
+*** logprint after mount and replay... ***
+
+ external log device not specified
+
+Usage: xfs_logprint [options...] <device>
+
+Options:
+ -c try to continue if error found in log
+ -C <filename> copy the log from the filesystem to filename
+ -d dump the log in log-record format
+ -e exit when an error is found in the log
+ -f specified device is actually a file
+ -l <device> filename of external log
+ -n don't try and interpret log data
+ -o print buffer data in hex
+ -s <start blk> block # to start printing
+ -v print "overwrite" data
+ -t print out transactional view
+ -b in transactional view, extract buffer info
+ -i in transactional view, extract inode info
+ -q in transactional view, extract quota info
+ -D print only data; no decoding
+ -V print version information
+
+*** filesystem is checked ok ***
+
+--- mkfs=test3, mnt=active_logs=6,background_gc=off,inline_dentry ---
+
+*** mkfs ***
+
+
+*** mount ***
+
+
+*** calling fsstress -p 4 -z -f rmdir=10 -f link=10 -f creat=10 -f mkdir=10 -f rename=30 -f stat=30 -f unlink=30 -f truncate=20 -m8 -n 10000 ***
+
+
+*** ls -RF SCRATCH_MNT ***
+
+
+*** godown ***
+
+
+*** unmount ***
+
+
+*** logprint after going down... ***
+
+ external log device not specified
+
+Usage: xfs_logprint [options...] <device>
+
+Options:
+ -c try to continue if error found in log
+ -C <filename> copy the log from the filesystem to filename
+ -d dump the log in log-record format
+ -e exit when an error is found in the log
+ -f specified device is actually a file
+ -l <device> filename of external log
+ -n don't try and interpret log data
+ -o print buffer data in hex
+ -s <start blk> block # to start printing
+ -v print "overwrite" data
+ -t print out transactional view
+ -b in transactional view, extract buffer info
+ -i in transactional view, extract inode info
+ -q in transactional view, extract quota info
+ -D print only data; no decoding
+ -V print version information
+
+*** mount with replay ***
+
+
+*** ls -RF SCRATCH_MNT ***
+
+
+*** diff ls before and after ***
+
+Files TMP.ls1 and TMP.ls2 are identical
+
+*** unmount ***
+
+
+*** logprint after mount and replay... ***
+
+ external log device not specified
+
+Usage: xfs_logprint [options...] <device>
+
+Options:
+ -c try to continue if error found in log
+ -C <filename> copy the log from the filesystem to filename
+ -d dump the log in log-record format
+ -e exit when an error is found in the log
+ -f specified device is actually a file
+ -l <device> filename of external log
+ -n don't try and interpret log data
+ -o print buffer data in hex
+ -s <start blk> block # to start printing
+ -v print "overwrite" data
+ -t print out transactional view
+ -b in transactional view, extract buffer info
+ -i in transactional view, extract inode info
+ -q in transactional view, extract quota info
+ -D print only data; no decoding
+ -V print version information
+
+*** filesystem is checked ok ***
+
+--- mkfs=test4, mnt=active_logs=6,background_gc=off,inline_dentry,inline_data ---
+
+*** mkfs ***
+
+
+*** mount ***
+
+
+*** calling fsstress -p 4 -z -f rmdir=10 -f link=10 -f creat=10 -f mkdir=10 -f rename=30 -f stat=30 -f unlink=30 -f truncate=20 -m8 -n 10000 ***
+
+
+*** ls -RF SCRATCH_MNT ***
+
+
+*** godown ***
+
+
+*** unmount ***
+
+
+*** logprint after going down... ***
+
+ external log device not specified
+
+Usage: xfs_logprint [options...] <device>
+
+Options:
+ -c try to continue if error found in log
+ -C <filename> copy the log from the filesystem to filename
+ -d dump the log in log-record format
+ -e exit when an error is found in the log
+ -f specified device is actually a file
+ -l <device> filename of external log
+ -n don't try and interpret log data
+ -o print buffer data in hex
+ -s <start blk> block # to start printing
+ -v print "overwrite" data
+ -t print out transactional view
+ -b in transactional view, extract buffer info
+ -i in transactional view, extract inode info
+ -q in transactional view, extract quota info
+ -D print only data; no decoding
+ -V print version information
+
+*** mount with replay ***
+
+
+*** ls -RF SCRATCH_MNT ***
+
+
+*** diff ls before and after ***
+
+Files TMP.ls1 and TMP.ls2 are identical
+
+*** unmount ***
+
+
+*** logprint after mount and replay... ***
+
+ external log device not specified
+
+Usage: xfs_logprint [options...] <device>
+
+Options:
+ -c try to continue if error found in log
+ -C <filename> copy the log from the filesystem to filename
+ -d dump the log in log-record format
+ -e exit when an error is found in the log
+ -f specified device is actually a file
+ -l <device> filename of external log
+ -n don't try and interpret log data
+ -o print buffer data in hex
+ -s <start blk> block # to start printing
+ -v print "overwrite" data
+ -t print out transactional view
+ -b in transactional view, extract buffer info
+ -i in transactional view, extract inode info
+ -q in transactional view, extract quota info
+ -D print only data; no decoding
+ -V print version information
+
+*** filesystem is checked ok ***
+
+--- mkfs=test5, mnt=active_logs=6,background_gc=off,disable_roll_forward ---
+
+*** mkfs ***
+
+
+*** mount ***
+
+
+*** calling fsstress -p 4 -z -f rmdir=10 -f link=10 -f creat=10 -f mkdir=10 -f rename=30 -f stat=30 -f unlink=30 -f truncate=20 -m8 -n 10000 ***
+
+
+*** ls -RF SCRATCH_MNT ***
+
+
+*** godown ***
+
+
+*** unmount ***
+
+
+*** logprint after going down... ***
+
+ external log device not specified
+
+Usage: xfs_logprint [options...] <device>
+
+Options:
+ -c try to continue if error found in log
+ -C <filename> copy the log from the filesystem to filename
+ -d dump the log in log-record format
+ -e exit when an error is found in the log
+ -f specified device is actually a file
+ -l <device> filename of external log
+ -n don't try and interpret log data
+ -o print buffer data in hex
+ -s <start blk> block # to start printing
+ -v print "overwrite" data
+ -t print out transactional view
+ -b in transactional view, extract buffer info
+ -i in transactional view, extract inode info
+ -q in transactional view, extract quota info
+ -D print only data; no decoding
+ -V print version information
+
+*** mount with replay ***
+
+
+*** ls -RF SCRATCH_MNT ***
+
+
+*** diff ls before and after ***
+
+Files TMP.ls1 and TMP.ls2 are identical
+
+*** unmount ***
+
+
+*** logprint after mount and replay... ***
+
+ external log device not specified
+
+Usage: xfs_logprint [options...] <device>
+
+Options:
+ -c try to continue if error found in log
+ -C <filename> copy the log from the filesystem to filename
+ -d dump the log in log-record format
+ -e exit when an error is found in the log
+ -f specified device is actually a file
+ -l <device> filename of external log
+ -n don't try and interpret log data
+ -o print buffer data in hex
+ -s <start blk> block # to start printing
+ -v print "overwrite" data
+ -t print out transactional view
+ -b in transactional view, extract buffer info
+ -i in transactional view, extract inode info
+ -q in transactional view, extract quota info
+ -D print only data; no decoding
+ -V print version information
+
+*** filesystem is checked ok ***
+
+--- mkfs=test6, mnt=active_logs=4,background_gc=off ---
+
+*** mkfs ***
+
+
+*** mount ***
+
+
+*** calling fsstress -p 4 -z -f rmdir=10 -f link=10 -f creat=10 -f mkdir=10 -f rename=30 -f stat=30 -f unlink=30 -f truncate=20 -m8 -n 10000 ***
+
+
+*** ls -RF SCRATCH_MNT ***
+
+
+*** godown ***
+
+
+*** unmount ***
+
+
+*** logprint after going down... ***
+
+ external log device not specified
+
+Usage: xfs_logprint [options...] <device>
+
+Options:
+ -c try to continue if error found in log
+ -C <filename> copy the log from the filesystem to filename
+ -d dump the log in log-record format
+ -e exit when an error is found in the log
+ -f specified device is actually a file
+ -l <device> filename of external log
+ -n don't try and interpret log data
+ -o print buffer data in hex
+ -s <start blk> block # to start printing
+ -v print "overwrite" data
+ -t print out transactional view
+ -b in transactional view, extract buffer info
+ -i in transactional view, extract inode info
+ -q in transactional view, extract quota info
+ -D print only data; no decoding
+ -V print version information
+
+*** mount with replay ***
+
+
+*** ls -RF SCRATCH_MNT ***
+
+
+*** diff ls before and after ***
+
+Files TMP.ls1 and TMP.ls2 are identical
+
+*** unmount ***
+
+
+*** logprint after mount and replay... ***
+
+ external log device not specified
+
+Usage: xfs_logprint [options...] <device>
+
+Options:
+ -c try to continue if error found in log
+ -C <filename> copy the log from the filesystem to filename
+ -d dump the log in log-record format
+ -e exit when an error is found in the log
+ -f specified device is actually a file
+ -l <device> filename of external log
+ -n don't try and interpret log data
+ -o print buffer data in hex
+ -s <start blk> block # to start printing
+ -v print "overwrite" data
+ -t print out transactional view
+ -b in transactional view, extract buffer info
+ -i in transactional view, extract inode info
+ -q in transactional view, extract quota info
+ -D print only data; no decoding
+ -V print version information
+
+*** filesystem is checked ok ***
+
+--- mkfs=test7, mnt=active_logs=2,background_gc=off ---
+
+*** mkfs ***
+
+
+*** mount ***
+
+
+*** calling fsstress -p 4 -z -f rmdir=10 -f link=10 -f creat=10 -f mkdir=10 -f rename=30 -f stat=30 -f unlink=30 -f truncate=20 -m8 -n 10000 ***
+
+
+*** ls -RF SCRATCH_MNT ***
+
+
+*** godown ***
+
+
+*** unmount ***
+
+
+*** logprint after going down... ***
+
+ external log device not specified
+
+Usage: xfs_logprint [options...] <device>
+
+Options:
+ -c try to continue if error found in log
+ -C <filename> copy the log from the filesystem to filename
+ -d dump the log in log-record format
+ -e exit when an error is found in the log
+ -f specified device is actually a file
+ -l <device> filename of external log
+ -n don't try and interpret log data
+ -o print buffer data in hex
+ -s <start blk> block # to start printing
+ -v print "overwrite" data
+ -t print out transactional view
+ -b in transactional view, extract buffer info
+ -i in transactional view, extract inode info
+ -q in transactional view, extract quota info
+ -D print only data; no decoding
+ -V print version information
+
+*** mount with replay ***
+
+
+*** ls -RF SCRATCH_MNT ***
+
+
+*** diff ls before and after ***
+
+Files TMP.ls1 and TMP.ls2 are identical
+
+*** unmount ***
+
+
+*** logprint after mount and replay... ***
+
+ external log device not specified
+
+Usage: xfs_logprint [options...] <device>
+
+Options:
+ -c try to continue if error found in log
+ -C <filename> copy the log from the filesystem to filename
+ -d dump the log in log-record format
+ -e exit when an error is found in the log
+ -f specified device is actually a file
+ -l <device> filename of external log
+ -n don't try and interpret log data
+ -o print buffer data in hex
+ -s <start blk> block # to start printing
+ -v print "overwrite" data
+ -t print out transactional view
+ -b in transactional view, extract buffer info
+ -i in transactional view, extract inode info
+ -q in transactional view, extract quota info
+ -D print only data; no decoding
+ -V print version information
+
+*** filesystem is checked ok ***
+
diff --git a/tests/shared/087.out.xfs b/tests/shared/087.out.xfs
new file mode 100644
index 0000000..9f009c0
--- /dev/null
+++ b/tests/shared/087.out.xfs
@@ -0,0 +1,389 @@
+QA output created by 087
+*** init FS
+--- mkfs=version=2, mnt=logbsize=32k ---
+
+*** mkfs ***
+
+
+*** mount ***
+
+
+*** calling fsstress -p 4 -z -f rmdir=10 -f link=10 -f creat=10 -f mkdir=10 -f rename=30 -f stat=30 -f unlink=30 -f truncate=20 -m8 -n 10000 ***
+
+
+*** ls -RF SCRATCH_MNT ***
+
+
+*** godown ***
+
+
+*** unmount ***
+
+
+*** logprint after going down... ***
+
+dirty log
+
+*** mount with replay ***
+
+
+*** ls -RF SCRATCH_MNT ***
+
+
+*** diff ls before and after ***
+
+Files TMP.ls1 and TMP.ls2 are identical
+
+*** unmount ***
+
+
+*** logprint after mount and replay... ***
+
+clean log
+
+*** filesystem is checked ok ***
+
+--- mkfs=version=2,su=4096, mnt=logbsize=32k ---
+
+*** mkfs ***
+
+
+*** mount ***
+
+
+*** calling fsstress -p 4 -z -f rmdir=10 -f link=10 -f creat=10 -f mkdir=10 -f rename=30 -f stat=30 -f unlink=30 -f truncate=20 -m8 -n 10000 ***
+
+
+*** ls -RF SCRATCH_MNT ***
+
+
+*** godown ***
+
+
+*** unmount ***
+
+
+*** logprint after going down... ***
+
+dirty log
+
+*** mount with replay ***
+
+
+*** ls -RF SCRATCH_MNT ***
+
+
+*** diff ls before and after ***
+
+Files TMP.ls1 and TMP.ls2 are identical
+
+*** unmount ***
+
+
+*** logprint after mount and replay... ***
+
+clean log
+
+*** filesystem is checked ok ***
+
+--- mkfs=version=2,su=32768, mnt=logbsize=32k ---
+
+*** mkfs ***
+
+
+*** mount ***
+
+
+*** calling fsstress -p 4 -z -f rmdir=10 -f link=10 -f creat=10 -f mkdir=10 -f rename=30 -f stat=30 -f unlink=30 -f truncate=20 -m8 -n 10000 ***
+
+
+*** ls -RF SCRATCH_MNT ***
+
+
+*** godown ***
+
+
+*** unmount ***
+
+
+*** logprint after going down... ***
+
+dirty log
+
+*** mount with replay ***
+
+
+*** ls -RF SCRATCH_MNT ***
+
+
+*** diff ls before and after ***
+
+Files TMP.ls1 and TMP.ls2 are identical
+
+*** unmount ***
+
+
+*** logprint after mount and replay... ***
+
+clean log
+
+*** filesystem is checked ok ***
+
+--- mkfs=version=2, mnt=logbsize=64k ---
+
+*** mkfs ***
+
+
+*** mount ***
+
+
+*** calling fsstress -p 4 -z -f rmdir=10 -f link=10 -f creat=10 -f mkdir=10 -f rename=30 -f stat=30 -f unlink=30 -f truncate=20 -m8 -n 10000 ***
+
+
+*** ls -RF SCRATCH_MNT ***
+
+
+*** godown ***
+
+
+*** unmount ***
+
+
+*** logprint after going down... ***
+
+dirty log
+
+*** mount with replay ***
+
+
+*** ls -RF SCRATCH_MNT ***
+
+
+*** diff ls before and after ***
+
+Files TMP.ls1 and TMP.ls2 are identical
+
+*** unmount ***
+
+
+*** logprint after mount and replay... ***
+
+clean log
+
+*** filesystem is checked ok ***
+
+--- mkfs=version=2,su=64k, mnt=logbsize=64k ---
+
+*** mkfs ***
+
+
+*** mount ***
+
+
+*** calling fsstress -p 4 -z -f rmdir=10 -f link=10 -f creat=10 -f mkdir=10 -f rename=30 -f stat=30 -f unlink=30 -f truncate=20 -m8 -n 10000 ***
+
+
+*** ls -RF SCRATCH_MNT ***
+
+
+*** godown ***
+
+
+*** unmount ***
+
+
+*** logprint after going down... ***
+
+dirty log
+
+*** mount with replay ***
+
+
+*** ls -RF SCRATCH_MNT ***
+
+
+*** diff ls before and after ***
+
+Files TMP.ls1 and TMP.ls2 are identical
+
+*** unmount ***
+
+
+*** logprint after mount and replay... ***
+
+clean log
+
+*** filesystem is checked ok ***
+
+--- mkfs=version=2, mnt=logbsize=128k ---
+
+*** mkfs ***
+
+
+*** mount ***
+
+
+*** calling fsstress -p 4 -z -f rmdir=10 -f link=10 -f creat=10 -f mkdir=10 -f rename=30 -f stat=30 -f unlink=30 -f truncate=20 -m8 -n 10000 ***
+
+
+*** ls -RF SCRATCH_MNT ***
+
+
+*** godown ***
+
+
+*** unmount ***
+
+
+*** logprint after going down... ***
+
+dirty log
+
+*** mount with replay ***
+
+
+*** ls -RF SCRATCH_MNT ***
+
+
+*** diff ls before and after ***
+
+Files TMP.ls1 and TMP.ls2 are identical
+
+*** unmount ***
+
+
+*** logprint after mount and replay... ***
+
+clean log
+
+*** filesystem is checked ok ***
+
+--- mkfs=version=2,su=128k, mnt=logbsize=128k ---
+
+*** mkfs ***
+
+
+*** mount ***
+
+
+*** calling fsstress -p 4 -z -f rmdir=10 -f link=10 -f creat=10 -f mkdir=10 -f rename=30 -f stat=30 -f unlink=30 -f truncate=20 -m8 -n 10000 ***
+
+
+*** ls -RF SCRATCH_MNT ***
+
+
+*** godown ***
+
+
+*** unmount ***
+
+
+*** logprint after going down... ***
+
+dirty log
+
+*** mount with replay ***
+
+
+*** ls -RF SCRATCH_MNT ***
+
+
+*** diff ls before and after ***
+
+Files TMP.ls1 and TMP.ls2 are identical
+
+*** unmount ***
+
+
+*** logprint after mount and replay... ***
+
+clean log
+
+*** filesystem is checked ok ***
+
+--- mkfs=version=2, mnt=logbsize=256k ---
+
+*** mkfs ***
+
+
+*** mount ***
+
+
+*** calling fsstress -p 4 -z -f rmdir=10 -f link=10 -f creat=10 -f mkdir=10 -f rename=30 -f stat=30 -f unlink=30 -f truncate=20 -m8 -n 10000 ***
+
+
+*** ls -RF SCRATCH_MNT ***
+
+
+*** godown ***
+
+
+*** unmount ***
+
+
+*** logprint after going down... ***
+
+dirty log
+
+*** mount with replay ***
+
+
+*** ls -RF SCRATCH_MNT ***
+
+
+*** diff ls before and after ***
+
+Files TMP.ls1 and TMP.ls2 are identical
+
+*** unmount ***
+
+
+*** logprint after mount and replay... ***
+
+clean log
+
+*** filesystem is checked ok ***
+
+--- mkfs=version=2,su=256k, mnt=logbsize=256k ---
+
+*** mkfs ***
+
+
+*** mount ***
+
+
+*** calling fsstress -p 4 -z -f rmdir=10 -f link=10 -f creat=10 -f mkdir=10 -f rename=30 -f stat=30 -f unlink=30 -f truncate=20 -m8 -n 10000 ***
+
+
+*** ls -RF SCRATCH_MNT ***
+
+
+*** godown ***
+
+
+*** unmount ***
+
+
+*** logprint after going down... ***
+
+dirty log
+
+*** mount with replay ***
+
+
+*** ls -RF SCRATCH_MNT ***
+
+
+*** diff ls before and after ***
+
+Files TMP.ls1 and TMP.ls2 are identical
+
+*** unmount ***
+
+
+*** logprint after mount and replay... ***
+
+clean log
+
+*** filesystem is checked ok ***
+
diff --git a/tests/shared/group b/tests/shared/group
index 429f2b4..c6e702d 100644
--- a/tests/shared/group
+++ b/tests/shared/group
@@ -6,6 +6,7 @@
006 auto enospc
032 mkfs auto quick
051 acl udf auto quick
+087 log v2log auto quota stress
272 auto enospc rw
289 auto quick
298 auto trim
diff --git a/tests/xfs/087 b/tests/xfs/087
deleted file mode 100755
index 9017bfd..0000000
--- a/tests/xfs/087
+++ /dev/null
@@ -1,174 +0,0 @@
-#! /bin/bash
-# FS QA Test No. 087
-#
-# * like 086 but want to create more/different kinds of metadata
-# and so will use fsstress
-# * also can interrupt metadata with godown
-#
-#-----------------------------------------------------------------------
-# Copyright (c) 2000-2004 Silicon Graphics, Inc. All Rights Reserved.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it would be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write the Free Software Foundation,
-# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-#
-#-----------------------------------------------------------------------
-#
-
-seqfull=$0
-seq=`basename $0`
-seqres=$RESULT_DIR/$seq
-echo "QA output created by $seq"
-
-here=`pwd`
-tmp=/tmp/$$
-status=1 # failure is the default!
-trap "rm -f $tmp.*; exit \$status" 0 1 2 3 15
-
-# get standard environment, filters and checks
-. ./common/rc
-. ./common/filter
-. ./common/log
-. ./common/quota
-
-_do_meta()
-{
- out=$SCRATCH_MNT/fsstress
- count=10000
- param="-p 4 -z -f rmdir=10 -f link=10 -f creat=10 -f mkdir=10 \
- -f rename=30 -f stat=30 -f unlink=30 -f truncate=20"
- _echofull "calling fsstress $param -m8 -n $count"
- FSSTRESS_ARGS=`_scale_fsstress_args $param $FSSTRESS_AVOID -m 8 -n $count -d $out`
- if ! $FSSTRESS_PROG $FSSTRESS_ARGS >>$seqres.full 2>&1
- then
- _echofull "fsstress failed"
- fi
-}
-
-# real QA test starts here
-_supported_fs xfs f2fs
-_supported_os IRIX Linux
-
-rm -f $seqres.full $tmp.*
-_require_scratch
-
-if [ "$FSTYP" == "xfs" ]; then
- _require_v2log
- _require_xfs_quota
-fi
-
-echo "*** init FS"
-umount $SCRATCH_DEV >/dev/null 2>&1
-
-cat >$tmp.seq.params.xfs <<EOF
-# mkfs-opt mount-opt
-# ------------------------------
- version=2 uquota,logbsize=32k
- version=2,su=4096 uquota,logbsize=32k
- version=2,su=32768 uquota,logbsize=32k
- version=2 uquota,logbsize=64k
- version=2,su=64k uquota,logbsize=64k
- version=2 uquota,logbsize=128k
- version=2,su=128k uquota,logbsize=128k
- version=2 uquota,logbsize=256k
- version=2,su=256k uquota,logbsize=256k
-EOF
-
-cat >$tmp.seq.params.f2fs <<EOF
-# mkfs-opt mount-opt
-# ---------------------------
- test1 active_logs=6,background_gc=off
- test2 active_logs=6,background_gc=off,inline_data
- test3 active_logs=6,background_gc=off,inline_dentry
- test4 active_logs=6,background_gc=off,inline_dentry,inline_data
- test5 active_logs=6,background_gc=off,disable_roll_forward
- test6 active_logs=4,background_gc=off
- test7 active_logs=2,background_gc=off
-EOF
-
-cat $tmp.seq.params.$FSTYP > $tmp.seq.params
-
-# link correct .out file
-_link_out_file_fs $seq.out $seqfull.out
-
-cat $tmp.seq.params \
-| while read mkfs mnt restofline
-do
- if [ "$mkfs" = "#" ]; then
- continue
- fi
-
- echo "--- mkfs=$mkfs, mnt=$mnt ---"
- export MKFS_OPTIONS="-l $mkfs"
- export MOUNT_OPTIONS="-o $mnt"
-
- # mkfs the FS
- _echofull "mkfs"
- _scratch_mkfs >>$seqres.full 2>&1
- if [ $? -ne 0 ] ; then
- _echofull "mkfs failed: $MKFS_OPTIONS"
- continue
- fi
-
- # mount the FS
- _echofull "mount"
- if ! _scratch_mount >>$seqres.full 2>&1; then
- _echofull "mount failed: $MOUNT_OPTIONS"
- continue
- fi
-
- # create the metadata
- _do_meta
-
- # check before on what FS should look like
- _echofull "ls -RF SCRATCH_MNT"
- ls -RF $SCRATCH_MNT >$tmp.ls1
-
- _echofull "godown"
- src/godown -v -f $SCRATCH_MNT >> $seqres.full
-
- _echofull "unmount"
- umount $SCRATCH_DEV >>$seqres.full 2>&1 \
- || _fail "umount failed"
-
- _echofull "logprint after going down..."
- _print_logstate
-
- _full "logprint headers"
- _scratch_xfs_logprint -n >>$seqres.full 2>&1
-
- _echofull "mount with replay"
- _scratch_mount >>$seqres.full 2>&1 \
- || _fail "mount failed: $MOUNT_OPTIONS"
-
- # check on what FS looks like after log recovery
- _echofull "ls -RF SCRATCH_MNT"
- ls -RF $SCRATCH_MNT >$tmp.ls2
-
- _echofull "diff ls before and after"
- diff -us $tmp.ls1 $tmp.ls2 | sed "s#$tmp#TMP#g"
-
- _echofull "unmount"
- umount $SCRATCH_MNT
-
- _echofull "logprint after mount and replay..."
- _print_logstate
-
- if _check_scratch_fs; then
- _echofull "filesystem is checked ok"
- else
- _echofull "filesystem is NOT ok"
- fi
-done
-
-status=0
-exit
diff --git a/tests/xfs/087.out.f2fs b/tests/xfs/087.out.f2fs
deleted file mode 100644
index f84d6cf..0000000
--- a/tests/xfs/087.out.f2fs
+++ /dev/null
@@ -1,583 +0,0 @@
-QA output created by 087
-*** init FS
---- mkfs=test1, mnt=active_logs=6,background_gc=off ---
-
-*** mkfs ***
-
-
-*** mount ***
-
-
-*** calling fsstress -p 4 -z -f rmdir=10 -f link=10 -f creat=10 -f mkdir=10 -f rename=30 -f stat=30 -f unlink=30 -f truncate=20 -m8 -n 10000 ***
-
-
-*** ls -RF SCRATCH_MNT ***
-
-
-*** godown ***
-
-
-*** unmount ***
-
-
-*** logprint after going down... ***
-
- external log device not specified
-
-Usage: xfs_logprint [options...] <device>
-
-Options:
- -c try to continue if error found in log
- -C <filename> copy the log from the filesystem to filename
- -d dump the log in log-record format
- -e exit when an error is found in the log
- -f specified device is actually a file
- -l <device> filename of external log
- -n don't try and interpret log data
- -o print buffer data in hex
- -s <start blk> block # to start printing
- -v print "overwrite" data
- -t print out transactional view
- -b in transactional view, extract buffer info
- -i in transactional view, extract inode info
- -q in transactional view, extract quota info
- -D print only data; no decoding
- -V print version information
-
-*** mount with replay ***
-
-
-*** ls -RF SCRATCH_MNT ***
-
-
-*** diff ls before and after ***
-
-Files TMP.ls1 and TMP.ls2 are identical
-
-*** unmount ***
-
-
-*** logprint after mount and replay... ***
-
- external log device not specified
-
-Usage: xfs_logprint [options...] <device>
-
-Options:
- -c try to continue if error found in log
- -C <filename> copy the log from the filesystem to filename
- -d dump the log in log-record format
- -e exit when an error is found in the log
- -f specified device is actually a file
- -l <device> filename of external log
- -n don't try and interpret log data
- -o print buffer data in hex
- -s <start blk> block # to start printing
- -v print "overwrite" data
- -t print out transactional view
- -b in transactional view, extract buffer info
- -i in transactional view, extract inode info
- -q in transactional view, extract quota info
- -D print only data; no decoding
- -V print version information
-
-*** filesystem is checked ok ***
-
---- mkfs=test2, mnt=active_logs=6,background_gc=off,inline_data ---
-
-*** mkfs ***
-
-
-*** mount ***
-
-
-*** calling fsstress -p 4 -z -f rmdir=10 -f link=10 -f creat=10 -f mkdir=10 -f rename=30 -f stat=30 -f unlink=30 -f truncate=20 -m8 -n 10000 ***
-
-
-*** ls -RF SCRATCH_MNT ***
-
-
-*** godown ***
-
-
-*** unmount ***
-
-
-*** logprint after going down... ***
-
- external log device not specified
-
-Usage: xfs_logprint [options...] <device>
-
-Options:
- -c try to continue if error found in log
- -C <filename> copy the log from the filesystem to filename
- -d dump the log in log-record format
- -e exit when an error is found in the log
- -f specified device is actually a file
- -l <device> filename of external log
- -n don't try and interpret log data
- -o print buffer data in hex
- -s <start blk> block # to start printing
- -v print "overwrite" data
- -t print out transactional view
- -b in transactional view, extract buffer info
- -i in transactional view, extract inode info
- -q in transactional view, extract quota info
- -D print only data; no decoding
- -V print version information
-
-*** mount with replay ***
-
-
-*** ls -RF SCRATCH_MNT ***
-
-
-*** diff ls before and after ***
-
-Files TMP.ls1 and TMP.ls2 are identical
-
-*** unmount ***
-
-
-*** logprint after mount and replay... ***
-
- external log device not specified
-
-Usage: xfs_logprint [options...] <device>
-
-Options:
- -c try to continue if error found in log
- -C <filename> copy the log from the filesystem to filename
- -d dump the log in log-record format
- -e exit when an error is found in the log
- -f specified device is actually a file
- -l <device> filename of external log
- -n don't try and interpret log data
- -o print buffer data in hex
- -s <start blk> block # to start printing
- -v print "overwrite" data
- -t print out transactional view
- -b in transactional view, extract buffer info
- -i in transactional view, extract inode info
- -q in transactional view, extract quota info
- -D print only data; no decoding
- -V print version information
-
-*** filesystem is checked ok ***
-
---- mkfs=test3, mnt=active_logs=6,background_gc=off,inline_dentry ---
-
-*** mkfs ***
-
-
-*** mount ***
-
-
-*** calling fsstress -p 4 -z -f rmdir=10 -f link=10 -f creat=10 -f mkdir=10 -f rename=30 -f stat=30 -f unlink=30 -f truncate=20 -m8 -n 10000 ***
-
-
-*** ls -RF SCRATCH_MNT ***
-
-
-*** godown ***
-
-
-*** unmount ***
-
-
-*** logprint after going down... ***
-
- external log device not specified
-
-Usage: xfs_logprint [options...] <device>
-
-Options:
- -c try to continue if error found in log
- -C <filename> copy the log from the filesystem to filename
- -d dump the log in log-record format
- -e exit when an error is found in the log
- -f specified device is actually a file
- -l <device> filename of external log
- -n don't try and interpret log data
- -o print buffer data in hex
- -s <start blk> block # to start printing
- -v print "overwrite" data
- -t print out transactional view
- -b in transactional view, extract buffer info
- -i in transactional view, extract inode info
- -q in transactional view, extract quota info
- -D print only data; no decoding
- -V print version information
-
-*** mount with replay ***
-
-
-*** ls -RF SCRATCH_MNT ***
-
-
-*** diff ls before and after ***
-
-Files TMP.ls1 and TMP.ls2 are identical
-
-*** unmount ***
-
-
-*** logprint after mount and replay... ***
-
- external log device not specified
-
-Usage: xfs_logprint [options...] <device>
-
-Options:
- -c try to continue if error found in log
- -C <filename> copy the log from the filesystem to filename
- -d dump the log in log-record format
- -e exit when an error is found in the log
- -f specified device is actually a file
- -l <device> filename of external log
- -n don't try and interpret log data
- -o print buffer data in hex
- -s <start blk> block # to start printing
- -v print "overwrite" data
- -t print out transactional view
- -b in transactional view, extract buffer info
- -i in transactional view, extract inode info
- -q in transactional view, extract quota info
- -D print only data; no decoding
- -V print version information
-
-*** filesystem is checked ok ***
-
---- mkfs=test4, mnt=active_logs=6,background_gc=off,inline_dentry,inline_data ---
-
-*** mkfs ***
-
-
-*** mount ***
-
-
-*** calling fsstress -p 4 -z -f rmdir=10 -f link=10 -f creat=10 -f mkdir=10 -f rename=30 -f stat=30 -f unlink=30 -f truncate=20 -m8 -n 10000 ***
-
-
-*** ls -RF SCRATCH_MNT ***
-
-
-*** godown ***
-
-
-*** unmount ***
-
-
-*** logprint after going down... ***
-
- external log device not specified
-
-Usage: xfs_logprint [options...] <device>
-
-Options:
- -c try to continue if error found in log
- -C <filename> copy the log from the filesystem to filename
- -d dump the log in log-record format
- -e exit when an error is found in the log
- -f specified device is actually a file
- -l <device> filename of external log
- -n don't try and interpret log data
- -o print buffer data in hex
- -s <start blk> block # to start printing
- -v print "overwrite" data
- -t print out transactional view
- -b in transactional view, extract buffer info
- -i in transactional view, extract inode info
- -q in transactional view, extract quota info
- -D print only data; no decoding
- -V print version information
-
-*** mount with replay ***
-
-
-*** ls -RF SCRATCH_MNT ***
-
-
-*** diff ls before and after ***
-
-Files TMP.ls1 and TMP.ls2 are identical
-
-*** unmount ***
-
-
-*** logprint after mount and replay... ***
-
- external log device not specified
-
-Usage: xfs_logprint [options...] <device>
-
-Options:
- -c try to continue if error found in log
- -C <filename> copy the log from the filesystem to filename
- -d dump the log in log-record format
- -e exit when an error is found in the log
- -f specified device is actually a file
- -l <device> filename of external log
- -n don't try and interpret log data
- -o print buffer data in hex
- -s <start blk> block # to start printing
- -v print "overwrite" data
- -t print out transactional view
- -b in transactional view, extract buffer info
- -i in transactional view, extract inode info
- -q in transactional view, extract quota info
- -D print only data; no decoding
- -V print version information
-
-*** filesystem is checked ok ***
-
---- mkfs=test5, mnt=active_logs=6,background_gc=off,disable_roll_forward ---
-
-*** mkfs ***
-
-
-*** mount ***
-
-
-*** calling fsstress -p 4 -z -f rmdir=10 -f link=10 -f creat=10 -f mkdir=10 -f rename=30 -f stat=30 -f unlink=30 -f truncate=20 -m8 -n 10000 ***
-
-
-*** ls -RF SCRATCH_MNT ***
-
-
-*** godown ***
-
-
-*** unmount ***
-
-
-*** logprint after going down... ***
-
- external log device not specified
-
-Usage: xfs_logprint [options...] <device>
-
-Options:
- -c try to continue if error found in log
- -C <filename> copy the log from the filesystem to filename
- -d dump the log in log-record format
- -e exit when an error is found in the log
- -f specified device is actually a file
- -l <device> filename of external log
- -n don't try and interpret log data
- -o print buffer data in hex
- -s <start blk> block # to start printing
- -v print "overwrite" data
- -t print out transactional view
- -b in transactional view, extract buffer info
- -i in transactional view, extract inode info
- -q in transactional view, extract quota info
- -D print only data; no decoding
- -V print version information
-
-*** mount with replay ***
-
-
-*** ls -RF SCRATCH_MNT ***
-
-
-*** diff ls before and after ***
-
-Files TMP.ls1 and TMP.ls2 are identical
-
-*** unmount ***
-
-
-*** logprint after mount and replay... ***
-
- external log device not specified
-
-Usage: xfs_logprint [options...] <device>
-
-Options:
- -c try to continue if error found in log
- -C <filename> copy the log from the filesystem to filename
- -d dump the log in log-record format
- -e exit when an error is found in the log
- -f specified device is actually a file
- -l <device> filename of external log
- -n don't try and interpret log data
- -o print buffer data in hex
- -s <start blk> block # to start printing
- -v print "overwrite" data
- -t print out transactional view
- -b in transactional view, extract buffer info
- -i in transactional view, extract inode info
- -q in transactional view, extract quota info
- -D print only data; no decoding
- -V print version information
-
-*** filesystem is checked ok ***
-
---- mkfs=test6, mnt=active_logs=4,background_gc=off ---
-
-*** mkfs ***
-
-
-*** mount ***
-
-
-*** calling fsstress -p 4 -z -f rmdir=10 -f link=10 -f creat=10 -f mkdir=10 -f rename=30 -f stat=30 -f unlink=30 -f truncate=20 -m8 -n 10000 ***
-
-
-*** ls -RF SCRATCH_MNT ***
-
-
-*** godown ***
-
-
-*** unmount ***
-
-
-*** logprint after going down... ***
-
- external log device not specified
-
-Usage: xfs_logprint [options...] <device>
-
-Options:
- -c try to continue if error found in log
- -C <filename> copy the log from the filesystem to filename
- -d dump the log in log-record format
- -e exit when an error is found in the log
- -f specified device is actually a file
- -l <device> filename of external log
- -n don't try and interpret log data
- -o print buffer data in hex
- -s <start blk> block # to start printing
- -v print "overwrite" data
- -t print out transactional view
- -b in transactional view, extract buffer info
- -i in transactional view, extract inode info
- -q in transactional view, extract quota info
- -D print only data; no decoding
- -V print version information
-
-*** mount with replay ***
-
-
-*** ls -RF SCRATCH_MNT ***
-
-
-*** diff ls before and after ***
-
-Files TMP.ls1 and TMP.ls2 are identical
-
-*** unmount ***
-
-
-*** logprint after mount and replay... ***
-
- external log device not specified
-
-Usage: xfs_logprint [options...] <device>
-
-Options:
- -c try to continue if error found in log
- -C <filename> copy the log from the filesystem to filename
- -d dump the log in log-record format
- -e exit when an error is found in the log
- -f specified device is actually a file
- -l <device> filename of external log
- -n don't try and interpret log data
- -o print buffer data in hex
- -s <start blk> block # to start printing
- -v print "overwrite" data
- -t print out transactional view
- -b in transactional view, extract buffer info
- -i in transactional view, extract inode info
- -q in transactional view, extract quota info
- -D print only data; no decoding
- -V print version information
-
-*** filesystem is checked ok ***
-
---- mkfs=test7, mnt=active_logs=2,background_gc=off ---
-
-*** mkfs ***
-
-
-*** mount ***
-
-
-*** calling fsstress -p 4 -z -f rmdir=10 -f link=10 -f creat=10 -f mkdir=10 -f rename=30 -f stat=30 -f unlink=30 -f truncate=20 -m8 -n 10000 ***
-
-
-*** ls -RF SCRATCH_MNT ***
-
-
-*** godown ***
-
-
-*** unmount ***
-
-
-*** logprint after going down... ***
-
- external log device not specified
-
-Usage: xfs_logprint [options...] <device>
-
-Options:
- -c try to continue if error found in log
- -C <filename> copy the log from the filesystem to filename
- -d dump the log in log-record format
- -e exit when an error is found in the log
- -f specified device is actually a file
- -l <device> filename of external log
- -n don't try and interpret log data
- -o print buffer data in hex
- -s <start blk> block # to start printing
- -v print "overwrite" data
- -t print out transactional view
- -b in transactional view, extract buffer info
- -i in transactional view, extract inode info
- -q in transactional view, extract quota info
- -D print only data; no decoding
- -V print version information
-
-*** mount with replay ***
-
-
-*** ls -RF SCRATCH_MNT ***
-
-
-*** diff ls before and after ***
-
-Files TMP.ls1 and TMP.ls2 are identical
-
-*** unmount ***
-
-
-*** logprint after mount and replay... ***
-
- external log device not specified
-
-Usage: xfs_logprint [options...] <device>
-
-Options:
- -c try to continue if error found in log
- -C <filename> copy the log from the filesystem to filename
- -d dump the log in log-record format
- -e exit when an error is found in the log
- -f specified device is actually a file
- -l <device> filename of external log
- -n don't try and interpret log data
- -o print buffer data in hex
- -s <start blk> block # to start printing
- -v print "overwrite" data
- -t print out transactional view
- -b in transactional view, extract buffer info
- -i in transactional view, extract inode info
- -q in transactional view, extract quota info
- -D print only data; no decoding
- -V print version information
-
-*** filesystem is checked ok ***
-
diff --git a/tests/xfs/087.out.xfs b/tests/xfs/087.out.xfs
deleted file mode 100644
index 9f009c0..0000000
--- a/tests/xfs/087.out.xfs
+++ /dev/null
@@ -1,389 +0,0 @@
-QA output created by 087
-*** init FS
---- mkfs=version=2, mnt=logbsize=32k ---
-
-*** mkfs ***
-
-
-*** mount ***
-
-
-*** calling fsstress -p 4 -z -f rmdir=10 -f link=10 -f creat=10 -f mkdir=10 -f rename=30 -f stat=30 -f unlink=30 -f truncate=20 -m8 -n 10000 ***
-
-
-*** ls -RF SCRATCH_MNT ***
-
-
-*** godown ***
-
-
-*** unmount ***
-
-
-*** logprint after going down... ***
-
-dirty log
-
-*** mount with replay ***
-
-
-*** ls -RF SCRATCH_MNT ***
-
-
-*** diff ls before and after ***
-
-Files TMP.ls1 and TMP.ls2 are identical
-
-*** unmount ***
-
-
-*** logprint after mount and replay... ***
-
-clean log
-
-*** filesystem is checked ok ***
-
---- mkfs=version=2,su=4096, mnt=logbsize=32k ---
-
-*** mkfs ***
-
-
-*** mount ***
-
-
-*** calling fsstress -p 4 -z -f rmdir=10 -f link=10 -f creat=10 -f mkdir=10 -f rename=30 -f stat=30 -f unlink=30 -f truncate=20 -m8 -n 10000 ***
-
-
-*** ls -RF SCRATCH_MNT ***
-
-
-*** godown ***
-
-
-*** unmount ***
-
-
-*** logprint after going down... ***
-
-dirty log
-
-*** mount with replay ***
-
-
-*** ls -RF SCRATCH_MNT ***
-
-
-*** diff ls before and after ***
-
-Files TMP.ls1 and TMP.ls2 are identical
-
-*** unmount ***
-
-
-*** logprint after mount and replay... ***
-
-clean log
-
-*** filesystem is checked ok ***
-
---- mkfs=version=2,su=32768, mnt=logbsize=32k ---
-
-*** mkfs ***
-
-
-*** mount ***
-
-
-*** calling fsstress -p 4 -z -f rmdir=10 -f link=10 -f creat=10 -f mkdir=10 -f rename=30 -f stat=30 -f unlink=30 -f truncate=20 -m8 -n 10000 ***
-
-
-*** ls -RF SCRATCH_MNT ***
-
-
-*** godown ***
-
-
-*** unmount ***
-
-
-*** logprint after going down... ***
-
-dirty log
-
-*** mount with replay ***
-
-
-*** ls -RF SCRATCH_MNT ***
-
-
-*** diff ls before and after ***
-
-Files TMP.ls1 and TMP.ls2 are identical
-
-*** unmount ***
-
-
-*** logprint after mount and replay... ***
-
-clean log
-
-*** filesystem is checked ok ***
-
---- mkfs=version=2, mnt=logbsize=64k ---
-
-*** mkfs ***
-
-
-*** mount ***
-
-
-*** calling fsstress -p 4 -z -f rmdir=10 -f link=10 -f creat=10 -f mkdir=10 -f rename=30 -f stat=30 -f unlink=30 -f truncate=20 -m8 -n 10000 ***
-
-
-*** ls -RF SCRATCH_MNT ***
-
-
-*** godown ***
-
-
-*** unmount ***
-
-
-*** logprint after going down... ***
-
-dirty log
-
-*** mount with replay ***
-
-
-*** ls -RF SCRATCH_MNT ***
-
-
-*** diff ls before and after ***
-
-Files TMP.ls1 and TMP.ls2 are identical
-
-*** unmount ***
-
-
-*** logprint after mount and replay... ***
-
-clean log
-
-*** filesystem is checked ok ***
-
---- mkfs=version=2,su=64k, mnt=logbsize=64k ---
-
-*** mkfs ***
-
-
-*** mount ***
-
-
-*** calling fsstress -p 4 -z -f rmdir=10 -f link=10 -f creat=10 -f mkdir=10 -f rename=30 -f stat=30 -f unlink=30 -f truncate=20 -m8 -n 10000 ***
-
-
-*** ls -RF SCRATCH_MNT ***
-
-
-*** godown ***
-
-
-*** unmount ***
-
-
-*** logprint after going down... ***
-
-dirty log
-
-*** mount with replay ***
-
-
-*** ls -RF SCRATCH_MNT ***
-
-
-*** diff ls before and after ***
-
-Files TMP.ls1 and TMP.ls2 are identical
-
-*** unmount ***
-
-
-*** logprint after mount and replay... ***
-
-clean log
-
-*** filesystem is checked ok ***
-
---- mkfs=version=2, mnt=logbsize=128k ---
-
-*** mkfs ***
-
-
-*** mount ***
-
-
-*** calling fsstress -p 4 -z -f rmdir=10 -f link=10 -f creat=10 -f mkdir=10 -f rename=30 -f stat=30 -f unlink=30 -f truncate=20 -m8 -n 10000 ***
-
-
-*** ls -RF SCRATCH_MNT ***
-
-
-*** godown ***
-
-
-*** unmount ***
-
-
-*** logprint after going down... ***
-
-dirty log
-
-*** mount with replay ***
-
-
-*** ls -RF SCRATCH_MNT ***
-
-
-*** diff ls before and after ***
-
-Files TMP.ls1 and TMP.ls2 are identical
-
-*** unmount ***
-
-
-*** logprint after mount and replay... ***
-
-clean log
-
-*** filesystem is checked ok ***
-
---- mkfs=version=2,su=128k, mnt=logbsize=128k ---
-
-*** mkfs ***
-
-
-*** mount ***
-
-
-*** calling fsstress -p 4 -z -f rmdir=10 -f link=10 -f creat=10 -f mkdir=10 -f rename=30 -f stat=30 -f unlink=30 -f truncate=20 -m8 -n 10000 ***
-
-
-*** ls -RF SCRATCH_MNT ***
-
-
-*** godown ***
-
-
-*** unmount ***
-
-
-*** logprint after going down... ***
-
-dirty log
-
-*** mount with replay ***
-
-
-*** ls -RF SCRATCH_MNT ***
-
-
-*** diff ls before and after ***
-
-Files TMP.ls1 and TMP.ls2 are identical
-
-*** unmount ***
-
-
-*** logprint after mount and replay... ***
-
-clean log
-
-*** filesystem is checked ok ***
-
---- mkfs=version=2, mnt=logbsize=256k ---
-
-*** mkfs ***
-
-
-*** mount ***
-
-
-*** calling fsstress -p 4 -z -f rmdir=10 -f link=10 -f creat=10 -f mkdir=10 -f rename=30 -f stat=30 -f unlink=30 -f truncate=20 -m8 -n 10000 ***
-
-
-*** ls -RF SCRATCH_MNT ***
-
-
-*** godown ***
-
-
-*** unmount ***
-
-
-*** logprint after going down... ***
-
-dirty log
-
-*** mount with replay ***
-
-
-*** ls -RF SCRATCH_MNT ***
-
-
-*** diff ls before and after ***
-
-Files TMP.ls1 and TMP.ls2 are identical
-
-*** unmount ***
-
-
-*** logprint after mount and replay... ***
-
-clean log
-
-*** filesystem is checked ok ***
-
---- mkfs=version=2,su=256k, mnt=logbsize=256k ---
-
-*** mkfs ***
-
-
-*** mount ***
-
-
-*** calling fsstress -p 4 -z -f rmdir=10 -f link=10 -f creat=10 -f mkdir=10 -f rename=30 -f stat=30 -f unlink=30 -f truncate=20 -m8 -n 10000 ***
-
-
-*** ls -RF SCRATCH_MNT ***
-
-
-*** godown ***
-
-
-*** unmount ***
-
-
-*** logprint after going down... ***
-
-dirty log
-
-*** mount with replay ***
-
-
-*** ls -RF SCRATCH_MNT ***
-
-
-*** diff ls before and after ***
-
-Files TMP.ls1 and TMP.ls2 are identical
-
-*** unmount ***
-
-
-*** logprint after mount and replay... ***
-
-clean log
-
-*** filesystem is checked ok ***
-
diff --git a/tests/xfs/group b/tests/xfs/group
index 496630d..1e4be94 100644
--- a/tests/xfs/group
+++ b/tests/xfs/group
@@ -76,7 +76,6 @@
084 ioctl rw auto
085 log auto quick
086 log v2log auto
-087 log v2log auto quota stress
090 rw auto
092 other auto quick
094 metadata dir ioctl auto
--
2.1.1
--
To unsubscribe from this list: send the line "unsubscribe fstests" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
