Hi All, Using the latest version from git, I am getting a signal 11 error when running some workloads. It may be that workloads fail when we wrap around the device capacity (e.g. runtime and time_based). See below example parameters: # fio --name=test_job --ioengine=libaio --direct=1 --rw=write --iodepth=32 --size=100% --numjobs=1 --bs=1m --filename=/dev/nvme0n1 --group_reporting --write_bw_log=test_job --write_iops_log=test_job --write_lat_log=test_job --log_avg_msec=1000 --disable_lat=0 --disable_clat=0 --disable_slat=0 --runtime=1500s --time_based --ramp_time=5s --output=test_job fio-2.11-17-ga275 Starting 1 process fio: pid=145763, got signal=11 In fio-2.11 (release), the error did not occur. Regards, Jeff Western Digital Corporation (and its subsidiaries) E-mail Confidentiality Notice & Disclaimer: This e-mail and any files transmitted with it may contain confidential or legally privileged information of WDC and/or its affiliates, and are intended solely for the use of the individual or entity to which they are addressed. If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited. If you have received this e-mail in error, please notify the sender immediately and delete the e-mail in its entirety from your system. -- To unsubscribe from this list: send the line "unsubscribe fio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
