Boris,
No, same problem as you have. Virt-manager will error out on libvirt
errors. I had to use virt-install to install an HVM. Does the
virt-manager just call virt-install with the correct parameters or is
there something else going on?
Jon
On Mon, 2009-08-31 at 21:26 -0700, Boris Derzhavets wrote:
> Jon,
>
> I have just, one question :-
> Are you saying that HVM install succeeded via
virt-manager ?
> I had to run virt-install to build HVM DomUs, virt-manager gave up
> at the beginning , complaining 2 different libvirt errors
>
> Boris.
>
> --- On Tue, 9/1/09, Jon <
jonr@xxxxxxxxxx> wrote:
>
> From: Jon <
jonr@xxxxxxxxxx>
> Subject: Setup Libvirt 0.7.0-6 & Xen 3.4.1 Dom0
> on top of Fedora 11 (64-bit)
> To:
fedora-xen@xxxxxxxxxx> Date: Tuesday, September 1, 2009,
12:00 AM
>
> Success. From an install off the DVD with all packages in the
> setup
> deselected. I have installed an HVM and a paravirt vm and both
> work.
> My only problem is that eth0 does not come up when I reboot
> and I have
> to do a dhclient eth0 to get an address or specify one myself.
> I have
> set the IP static in
> the /etc/sysconf/network-scripts/ifcfg-eth0 file
> but it still comes up without an address.
>
> Thanks Boris for all the help!!
>
> Jon
>
> [root@localhost xen]# lspci
> 00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller
> (rev a1)
> 00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev
> a2)
> 00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2)
> 00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller
> (rev a2)
>
00:02.0 USB Controller: nVidia Corporation MCP61 USB
> Controller (rev a3)
> 00:02.1 USB Controller: nVidia Corporation MCP61 USB
> Controller (rev a3)
> 00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev
> a1)
> 00:06.0 IDE interface: nVidia Corporation MCP61 IDE (rev a2)
> 00:07.0 Bridge: nVidia Corporation MCP61 Ethernet (rev a2)
> 00:08.0 IDE interface: nVidia Corporation MCP61 SATA
> Controller (rev a2)
> 00:08.1 IDE interface: nVidia Corporation MCP61 SATA
>
Controller (rev a2)
> 00:09.0 PCI bridge: nVidia Corporation MCP61 PCI Express
> bridge (rev a2)
> 00:0b.0 PCI bridge: nVidia Corporation MCP61 PCI Express
> bridge (rev a2)
> 00:0c.0 PCI bridge: nVidia Corporation MCP61 PCI Express
> bridge (rev a2)
> 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h
> [Opteron,
> Athlon64, Sempron] HyperTransport Configuration
> 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h
> [Opteron,
>
Athlon64, Sempron] Address Map
> 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h
> [Opteron,
> Athlon64, Sempron] DRAM Controller
> 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h
> [Opteron,
> Athlon64, Sempron] Miscellaneous Control
> 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h
> [Opteron,
> Athlon64, Sempron] Link Control
> 02:00.0 VGA compatible controller: nVidia Corporation GeForce
> 8500
GT
> (rev a1)
>
>
>
> cat /proc/cpuinfo
> processor : 0
> vendor_id : AuthenticAMD
> cpu family : 16
> model : 2
> model name : AMD Phenom(tm) 9500 Quad-Core Processor
> stepping : 2
> cpu MHz : 140637.186
> cache size : 512 KB
>
fpu : yes
> fpu_exception : yes
> cpuid level : 5
> wp : yes
> flags : fpu de tsc msr pae mce cx8 apic mtrr mca cmov
> clflush mmx fxsr
> sse sse2 ht syscall nx mmxext fxsr_opt lm 3dnowext 3dnow
> constant_tsc
> rep_good nonstop_tsc extd_apicid pni cx16 popcnt hypervisor
> lahf_lm
> cmp_legacy extapic cr8_legacy abm sse4a misalignsse
>
3dnowprefetch
> bogomips : 4420.21
> TLB size : 1024 4K pages
> clflush size : 64
> cache_alignment : 64
> address sizes : 48 bits physical, 48 bits virtual
> power management: ts ttp tm stc 100mhzsteps hwpstate
>
> --
> Fedora-xen mailing list
>
Fedora-xen@xxxxxxxxxx>
https://www.redhat.com/mailman/listinfo/fedora-xen>
>
