Boris, No, same problem as you have. Virt-manager will error out on libvirt errors. I had to use virt-install to install an HVM. Does the virt-manager just call virt-install with the correct parameters or is there something else going on? Jon On Mon, 2009-08-31 at 21:26 -0700, Boris Derzhavets wrote: > Jon, > > I have just, one question :- > Are you saying that HVM install succeeded via virt-manager ? > I had to run virt-install to build HVM DomUs, virt-manager gave up > at the beginning , complaining 2 different libvirt errors > > Boris. > > --- On Tue, 9/1/09, Jon <jonr@xxxxxxxxxx> wrote: > > From: Jon <jonr@xxxxxxxxxx> > Subject: Setup Libvirt 0.7.0-6 & Xen 3.4.1 Dom0 > on top of Fedora 11 (64-bit) > To: fedora-xen@xxxxxxxxxx > Date: Tuesday, September 1, 2009, 12:00 AM > > Success. From an install off the DVD with all packages in the > setup > deselected. I have installed an HVM and a paravirt vm and both > work. > My only problem is that eth0 does not come up when I reboot > and I have > to do a dhclient eth0 to get an address or specify one myself. > I have > set the IP static in > the /etc/sysconf/network-scripts/ifcfg-eth0 file > but it still comes up without an address. > > Thanks Boris for all the help!! > > Jon > > [root@localhost xen]# lspci > 00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller > (rev a1) > 00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev > a2) > 00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2) > 00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller > (rev a2) > 00:02.0 USB Controller: nVidia Corporation MCP61 USB > Controller (rev a3) > 00:02.1 USB Controller: nVidia Corporation MCP61 USB > Controller (rev a3) > 00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev > a1) > 00:06.0 IDE interface: nVidia Corporation MCP61 IDE (rev a2) > 00:07.0 Bridge: nVidia Corporation MCP61 Ethernet (rev a2) > 00:08.0 IDE interface: nVidia Corporation MCP61 SATA > Controller (rev a2) > 00:08.1 IDE interface: nVidia Corporation MCP61 SATA > Controller (rev a2) > 00:09.0 PCI bridge: nVidia Corporation MCP61 PCI Express > bridge (rev a2) > 00:0b.0 PCI bridge: nVidia Corporation MCP61 PCI Express > bridge (rev a2) > 00:0c.0 PCI bridge: nVidia Corporation MCP61 PCI Express > bridge (rev a2) > 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h > [Opteron, > Athlon64, Sempron] HyperTransport Configuration > 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h > [Opteron, > Athlon64, Sempron] Address Map > 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h > [Opteron, > Athlon64, Sempron] DRAM Controller > 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h > [Opteron, > Athlon64, Sempron] Miscellaneous Control > 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h > [Opteron, > Athlon64, Sempron] Link Control > 02:00.0 VGA compatible controller: nVidia Corporation GeForce > 8500 GT > (rev a1) > > > > cat /proc/cpuinfo > processor : 0 > vendor_id : AuthenticAMD > cpu family : 16 > model : 2 > model name : AMD Phenom(tm) 9500 Quad-Core Processor > stepping : 2 > cpu MHz : 140637.186 > cache size : 512 KB > fpu : yes > fpu_exception : yes > cpuid level : 5 > wp : yes > flags : fpu de tsc msr pae mce cx8 apic mtrr mca cmov > clflush mmx fxsr > sse sse2 ht syscall nx mmxext fxsr_opt lm 3dnowext 3dnow > constant_tsc > rep_good nonstop_tsc extd_apicid pni cx16 popcnt hypervisor > lahf_lm > cmp_legacy extapic cr8_legacy abm sse4a misalignsse > 3dnowprefetch > bogomips : 4420.21 > TLB size : 1024 4K pages > clflush size : 64 > cache_alignment : 64 > address sizes : 48 bits physical, 48 bits virtual > power management: ts ttp tm stc 100mhzsteps hwpstate > > -- > Fedora-xen mailing list > Fedora-xen@xxxxxxxxxx > https://www.redhat.com/mailman/listinfo/fedora-xen > > -- Fedora-xen mailing list Fedora-xen@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/fedora-xen
