2010/10/4 James Laska <jlaska@xxxxxxxxxx>: > On Mon, 2010-10-04 at 15:28 +0200, Michał Piotrowski wrote: >> 2010/10/4 James Laska <jlaska@xxxxxxxxxx>: >> > On Mon, 2010-10-04 at 13:10 +0200, Michał Piotrowski wrote: >> >> W dniu 4 października 2010 00:16 użytkownik Michał Piotrowski >> >> <mkkp4x4@xxxxxxxxx> napisał: >> >> > W dniu 3 października 2010 23:58 użytkownik Bruno Wolff III >> >> > <bruno@xxxxxxxx> napisał: >> >> >> There >> >> >> was some recent security updates that affected pretty much all versions. >> >> >> I haven't run into any f14 specific problems recently. >> >> >> >> >> > >> >> > Good to know. I'll try to update system. I will let know if there are >> >> > any problems >> >> >> >> I noticed a problem with preupgrade-cli. I rebooted system, preupgrade >> >> updated it, but then the system does not respond to ping - I turned >> >> off it by pressing power button. I connected box to the TV to see what >> >> happens, but the system started correctly. Strange. Do physical access >> >> to the machine is required when using preupgrade? >> >> >> >> Apart from that it seems that everything went well. >> > >> > Should not be required, but hard to say without more details. I suspect >> > it the installer stopped and was prompting you for some information >> > (perhaps language or keymap)? Do you have access to the installer logs >> > from the preupgrade attempt? >> >> Yes, I've got some logs from installation. I can post it - it's about 226 kb. > > I wouldn't mind seeing the logs (fpaste.org). Can you > paste /root/upgrade.log, /root/install.log and /var/log/anaconda.log? anaconda.log http://fpaste.org/FFnR/ anaconda.program http://fpaste.org/jNYH/ anaconda.storage http://fpaste.org/u5mA/ anaconda.syslog http://fpaste.org/AqTK/ anaconda.xlog http://fpaste.org/gWwP/ anaconda.yum http://fpaste.org/CqmZ/ upgrade.log http://fpaste.org/Lzn4/ upgrade.log.syslog http://fpaste.org/2KtM/ That's all I have - I deleted install.log one and a half years ago. > Did the install ever complete? I don't know - this box is not attached to any display - I was not able to verify it. According to this http://fpaste.org/Lzn4/ packages was installed. > Or did you force reboot it before it > ever started/completed? I ran preupgrade - it downloaded all packages, then I reboot system. I waited for almost two hours before I turned off it manually. System at that time did not respond to ping. > When preupgrade reboots into the installer, it > sets up a boot-next grub target which will boot into the installer > *only* for the next reboot. If you reboot multiple times before > starting the installer, it will boot back into your previously defined > default boot target. It seems to me that the system is properly upgraded. > > Thanks, > James > Regards, Michal -- test mailing list test@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe: https://admin.fedoraproject.org/mailman/listinfo/test
