On 11/25/2009 03:56 PM, Adam Williamson wrote:
dmesg might be interesting. I wonder if it depends on the chipset.
Setting nomodeset on the kernel line was required, but the modules are
co-loaded.
The attached is from my laptop.
I've used nouveau and nvidia with F11 as well, but KMS was not defaulted
on in F11 so "nomodeset" was not required at the time. Now it is.
If KMS is left on, you will see nvidia module messages such as "blah
blah blah in use is nvidiafb loaded?" etc.
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.31.5-127.fc12.x86_64 (mockbuild@xxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.4.2 20091027 (Red Hat 4.4.2-7) (GCC) ) #1 SMP Sat Nov 7 21:11:14 EST 2009
Command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet nomodeset SYSFONT=latarcyrheb-sun16 LANG=en_US.UTF-8 KEYTABLE=us
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e1000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bff80000 (usable)
BIOS-e820: 00000000bff80000 - 00000000bff8f000 (ACPI data)
BIOS-e820: 00000000bff8f000 - 00000000bffe0000 (ACPI NVS)
BIOS-e820: 00000000bffe0000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000fed20000 - 00000000fed40000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
DMI 2.5 present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0x140000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-EFFFF write-through
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F00000000 write-back
1 base 100000000 mask FC0000000 write-back
2 base 0C0000000 mask FC0000000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 4GB, type WB
reg 1, base: 4GB, range: 1GB, type WB
reg 2, base: 3GB, range: 1GB, type UC
total RAM coverred: 4096M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64K num_reg: 3 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 4GB, range: 1GB, type WB
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbff80 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000bff80000
0000000000 - 00bfe00000 page 2M
00bfe00000 - 00bff80000 page 4k
kernel direct mapping tables up to bff80000 @ 10000-15000
init_memory_mapping: 0000000100000000-0000000140000000
0100000000 - 0140000000 page 2M
kernel direct mapping tables up to 140000000 @ 13000-19000
RAMDISK: 374ec000 - 37fef647
ACPI: RSDP 00000000000f9330 00024 (v02 ACPIAM)
ACPI: XSDT 00000000bff80100 00084 (v01 _ASUS_ Notebook 20090901 MSFT 00000097)
ACPI: FACP 00000000bff80290 000F4 (v03 090109 FACP0913 20090901 MSFT 00000097)
ACPI: DSDT 00000000bff80680 0B8A7 (v01 N80Vc N80Vc208 00000208 INTL 20051117)
ACPI: FACS 00000000bff8f000 00040
ACPI: APIC 00000000bff80390 0005C (v01 090109 APIC0913 20090901 MSFT 00000097)
ACPI: MCFG 00000000bff80430 0003C (v01 090109 OEMMCFG 20090901 MSFT 00000097)
ACPI: SLIC 00000000bff80470 00176 (v01 _ASUS_ Notebook 20090901 MSFT 00000097)
ACPI: ECDT 00000000bff80620 00054 (v01 090109 OEMECDT 20090901 MSFT 00000097)
ACPI: DBGP 00000000bff803f0 00034 (v01 090109 DBGP0913 20090901 MSFT 00000097)
ACPI: BOOT 00000000bff805f0 00028 (v01 090109 BOOT0913 20090901 MSFT 00000097)
ACPI: OEMB 00000000bff8f040 00071 (v01 090109 OEMB0913 20090901 MSFT 00000097)
ACPI: HPET 00000000bff8bf30 00038 (v01 090109 OEMHPET 20090901 MSFT 00000097)
ACPI: DMAR 00000000bff8f0c0 00108 (v01 090109 DMAR0913 20090901 MSFT 00000097)
ACPI: ATKG 00000000bff8f3d0 08024 (v01 090109 OEMATKG 20090901 MSFT 00000097)
ACPI: SSDT 00000000bff97f20 004F0 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-0000000140000000
Bootmem setup node 0 0000000000000000-0000000140000000
NODE_DATA [0000000000014000 - 0000000000029fff]
bootmap [000000000002a000 - 0000000000051fff] pages 28
(8 early reservations) ==> bootmem [0000000000 - 0140000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 00019adb00] TEXT DATA BSS ==> [0001000000 - 00019adb00]
#3 [00374ec000 - 0037fef647] RAMDISK ==> [00374ec000 - 0037fef647]
#4 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000]
#5 [00019ae000 - 00019ae240] BRK ==> [00019ae000 - 00019ae240]
#6 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000]
#7 [0000013000 - 0000014000] PGTABLE ==> [0000013000 - 0000014000]
found SMP MP-table at [ffff8800000ff780] ff780
[ffffea0000000000-ffffea00045fffff] PMD -> [ffff880028600000-ffff88002bdfffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00140000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009e
0: 0x00000100 -> 0x000bff80
0: 0x00100000 -> 0x00140000
On node 0 totalpages: 1048334
DMA zone: 56 pages used for memmap
DMA zone: 104 pages reserved
DMA zone: 3822 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 767928 pages, LIFO batch:31
Normal zone: 3584 pages used for memmap
Normal zone: 258560 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e1000
PM: Registered nosave memory: 00000000000e1000 - 0000000000100000
PM: Registered nosave memory: 00000000bff80000 - 00000000bff8f000
PM: Registered nosave memory: 00000000bff8f000 - 00000000bffe0000
PM: Registered nosave memory: 00000000bffe0000 - 00000000c0000000
PM: Registered nosave memory: 00000000c0000000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000fed40000
PM: Registered nosave memory: 00000000fed40000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ffb00000
PM: Registered nosave memory: 00000000ffb00000 - 0000000100000000
Allocating PCI resources starting at c0000000 (gap: c0000000:3ed20000)
NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 29 pages at ffff880028022000, static data 90080 bytes
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1030310
Policy zone: Normal
Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet nomodeset SYSFONT=latarcyrheb-sun16 LANG=en_US.UTF-8 KEYTABLE=us
PID hash table entries: 4096 (order: 12, 32768 bytes)
Initializing CPU#0
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 4114260k/5242880k available (4227k kernel code, 1049544k absent, 79076k reserved, 2926k data, 1324k init)
SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:4352 nr_irqs:424
Extended CMOS year: 2000
Fast TSC calibration using PIT
Detected 2394.027 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 41943040 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.05 BogoMIPS (lpj=2394027)
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU 0/0x0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring handled by SMI
using mwait in idle threads.
Performance Counters: Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic counters: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose counters: 3
... counter mask: 0000000700000003
ACPI: Core revision 20090521
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 20852 entries in 82 pages
DMAR:Host address width 36
DMAR:DRHD base: 0x000000fed90000 flags: 0x0
IOMMU fed90000: ver 1:0 cap c9008020e30260 ecap 1000
DMAR:DRHD base: 0x000000fed93000 flags: 0x1
IOMMU fed93000: ver 1:0 cap c9008020630260 ecap 1000
DMAR:RMRR base: 0x000000000e1000 end: 0x000000000e3fff
DMAR:RMRR base: 0x000000bfff0000 end: 0x000000bfffffff
DMAR:No ATSR found
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz stepping 06
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4787.75 BogoMIPS (lpj=2393875)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU 1/0x1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
mce: CPU supports 6 MCE banks
CPU1: Thermal monitoring enabled (TM2)
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz stepping 06
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (9575.80 BogoMIPS).
sizeof(vma)=176 bytes
sizeof(page)=56 bytes
sizeof(inode)=584 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=776 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=248 bytes
sizeof(task_struct)=6008 bytes
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
Booting paravirtualized kernel on bare hardware
regulator: core version 0.5
Time: 14:27:09 Date: 11/25/09
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: EC description table is found, configuring boot EC
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG at e0000000 - efffffff
ACPI: EC: GPE = 0x1b, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in poll mode
ACPI Warning: Incorrect checksum in table [ATKG] - 42, should be F5 20090521 tbutils-246
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
DMAR: Forcing write-buffer flush capability
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1a.0: reg 20 io port: [0xbc00-0xbc1f]
pci 0000:00:1a.1: reg 20 io port: [0xb880-0xb89f]
pci 0000:00:1a.2: reg 20 io port: [0xb800-0xb81f]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xf9fffc00-0xf9ffffff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xf9ff8000-0xf9ffbfff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0xb480-0xb49f]
pci 0000:00:1d.1: reg 20 io port: [0xb400-0xb41f]
pci 0000:00:1d.2: reg 20 io port: [0xb080-0xb09f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xf9fff800-0xf9fffbff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.2: reg 10 io port: [0xb000-0xb007]
pci 0000:00:1f.2: reg 14 io port: [0xac00-0xac03]
pci 0000:00:1f.2: reg 18 io port: [0xa880-0xa887]
pci 0000:00:1f.2: reg 1c io port: [0xa800-0xa803]
pci 0000:00:1f.2: reg 20 io port: [0xa480-0xa49f]
pci 0000:00:1f.2: reg 24 32bit mmio: [0xf9fff000-0xf9fff7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:01:00.0: reg 10 32bit mmio: [0xfc000000-0xfcffffff]
pci 0000:01:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
pci 0000:01:00.0: reg 1c 64bit mmio: [0xfa000000-0xfbffffff]
pci 0000:01:00.0: reg 24 io port: [0xcc00-0xcc7f]
pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x07ffff]
pci 0000:00:01.0: bridge io port: [0xc000-0xcfff]
pci 0000:00:01.0: bridge 32bit mmio: [0xfa000000-0xfdefffff]
pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
pci 0000:03:00.0: reg 10 64bit mmio: [0xfdff0000-0xfdffffff]
pci 0000:03:00.0: supports D1
pci 0000:03:00.0: PME# supported from D0 D1 D3hot
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.1: bridge 32bit mmio: [0xfdf00000-0xfdffffff]
pci 0000:00:1c.2: bridge io port: [0xd000-0xdfff]
pci 0000:00:1c.2: bridge 32bit mmio: [0xfe000000-0xfe9fffff]
pci 0000:00:1c.2: bridge 64bit mmio pref: [0xf6000000-0xf8efffff]
pci 0000:06:00.0: reg 10 io port: [0xe800-0xe8ff]
pci 0000:06:00.0: reg 18 64bit mmio: [0xf8fff000-0xf8ffffff]
pci 0000:06:00.0: reg 20 64bit mmio: [0xf8fe0000-0xf8feffff]
pci 0000:06:00.0: reg 30 32bit mmio: [0xfeaf0000-0xfeafffff]
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:06:00.0: PME# disabled
pci 0000:00:1c.5: bridge io port: [0xe000-0xefff]
pci 0000:00:1c.5: bridge 32bit mmio: [0xfea00000-0xfeafffff]
pci 0000:00:1c.5: bridge 64bit mmio pref: [0xf8f00000-0xf8ffffff]
pci 0000:07:03.0: reg 10 32bit mmio: [0xfebff800-0xfebfffff]
pci 0000:07:03.0: PME# supported from D0 D3hot D3cold
pci 0000:07:03.0: PME# disabled
pci 0000:07:03.1: reg 10 32bit mmio: [0xfebff400-0xfebff4ff]
pci 0000:07:03.1: supports D1 D2
pci 0000:07:03.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:07:03.1: PME# disabled
pci 0000:07:03.2: reg 10 32bit mmio: [0xfebff000-0xfebff0ff]
pci 0000:07:03.2: supports D1 D2
pci 0000:07:03.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:07:03.2: PME# disabled
pci 0000:07:03.3: reg 10 32bit mmio: [0xfebfec00-0xfebfecff]
pci 0000:07:03.3: supports D1 D2
pci 0000:07:03.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:07:03.3: PME# disabled
pci 0000:07:03.4: reg 10 32bit mmio: [0xfebfe800-0xfebfe8ff]
pci 0000:07:03.4: supports D1 D2
pci 0000:07:03.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:07:03.4: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 10 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs *6)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 10 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 6) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 12)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 12)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 12)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
IOMMU 0xfed90000: using Register based invalidation
IOMMU 0xfed93000: using Register based invalidation
IOMMU: software identity mapping for device 0000:01:00.0
IOMMU: Setting RMRR:
IOMMU: Setting identity map for device 0000:00:1d.0 [0xbfff0000 - 0xc0000000]
IOMMU: Setting identity map for device 0000:00:1d.1 [0xbfff0000 - 0xc0000000]
IOMMU: Setting identity map for device 0000:00:1d.2 [0xbfff0000 - 0xc0000000]
IOMMU: Setting identity map for device 0000:00:1d.7 [0xbfff0000 - 0xc0000000]
IOMMU: Setting identity map for device 0000:00:1a.0 [0xbfff0000 - 0xc0000000]
IOMMU: Setting identity map for device 0000:00:1a.1 [0xbfff0000 - 0xc0000000]
IOMMU: Setting identity map for device 0000:00:1a.2 [0xbfff0000 - 0xc0000000]
IOMMU: Setting identity map for device 0000:00:1a.7 [0xbfff0000 - 0xc0000000]
IOMMU: Setting identity map for device 0000:00:1d.0 [0xe1000 - 0xe4000]
IOMMU: Setting identity map for device 0000:00:1d.1 [0xe1000 - 0xe4000]
IOMMU: Setting identity map for device 0000:00:1d.2 [0xe1000 - 0xe4000]
IOMMU: Setting identity map for device 0000:00:1d.7 [0xe1000 - 0xe4000]
IOMMU: Setting identity map for device 0000:00:1a.0 [0xe1000 - 0xe4000]
IOMMU: Setting identity map for device 0000:00:1a.1 [0xe1000 - 0xe4000]
IOMMU: Setting identity map for device 0000:00:1a.2 [0xe1000 - 0xe4000]
IOMMU: Setting identity map for device 0000:00:1a.7 [0xe1000 - 0xe4000]
IOMMU: Prepare 0-16MiB unity mapping for LPC
IOMMU: Setting identity map for device 0000:00:1f.0 [0x0 - 0x1000000]
alloc irq_desc for 24 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 25 on node 0
alloc kstat_irqs on node 0
PCI-DMA: Intel(R) Virtualization Technology for Directed I/O
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 16 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: iomem range 0xfed10000-0xfed19fff has been reserved
system 00:08: ioport range 0x4d0-0x4d1 has been reserved
system 00:08: ioport range 0x800-0x87f has been reserved
system 00:08: ioport range 0x400-0x41f has been reserved
system 00:08: ioport range 0x500-0x57f has been reserved
system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:08: iomem range 0xfed45000-0xfed89fff has been reserved
system 00:08: iomem range 0xfed90000-0xfed90fff has been reserved
system 00:08: iomem range 0xfed91000-0xfed91fff has been reserved
system 00:08: iomem range 0xfed92000-0xfed92fff has been reserved
system 00:08: iomem range 0xfed93000-0xfed93fff has been reserved
system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved
system 00:08: iomem range 0xfff00000-0xffffffff has been reserved
system 00:0a: iomem range 0xffa00000-0xffbfffff could not be reserved
system 00:0a: iomem range 0xffe00000-0xffffffff could not be reserved
system 00:0b: iomem range 0xffc00000-0xffdfffff has been reserved
system 00:0c: ioport range 0x250-0x253 has been reserved
system 00:0c: ioport range 0x256-0x25f has been reserved
system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0c: iomem range 0xfec10000-0xfec17fff has been reserved
system 00:0c: iomem range 0xfec18000-0xfec1ffff has been reserved
system 00:0c: iomem range 0xfec20000-0xfec27fff has been reserved
system 00:0c: iomem range 0xfec38000-0xfec3ffff has been reserved
system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0f: iomem range 0x0-0x9ffff could not be reserved
system 00:0f: iomem range 0xc0000-0xcffff has been reserved
system 00:0f: iomem range 0xe0000-0xfffff could not be reserved
system 00:0f: iomem range 0x100000-0xbfffffff could not be reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: 0xc000-0xcfff
pci 0000:00:01.0: MEM window: 0xfa000000-0xfdefffff
pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0: IO window: disabled
pci 0000:00:1c.0: MEM window: disabled
pci 0000:00:1c.0: PREFETCH window: disabled
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.1: IO window: disabled
pci 0000:00:1c.1: MEM window: 0xfdf00000-0xfdffffff
pci 0000:00:1c.1: PREFETCH window: disabled
pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.2: IO window: 0xd000-0xdfff
pci 0000:00:1c.2: MEM window: 0xfe000000-0xfe9fffff
pci 0000:00:1c.2: PREFETCH window: 0x000000f6000000-0x000000f8efffff
pci 0000:00:1c.5: PCI bridge, secondary bus 0000:06
pci 0000:00:1c.5: IO window: 0xe000-0xefff
pci 0000:00:1c.5: MEM window: 0xfea00000-0xfeafffff
pci 0000:00:1c.5: PREFETCH window: 0x000000f8f00000-0x000000f8ffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:07
pci 0000:00:1e.0: IO window: disabled
pci 0000:00:1e.0: MEM window: 0xfeb00000-0xfebfffff
pci 0000:00:1e.0: PREFETCH window: disabled
alloc irq_desc for 16 on node 0
alloc kstat_irqs on node 0
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 17 on node 0
alloc kstat_irqs on node 0
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
alloc irq_desc for 18 on node 0
alloc kstat_irqs on node 0
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 io: [0xc000-0xcfff]
pci_bus 0000:01: resource 1 mem: [0xfa000000-0xfdefffff]
pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
pci_bus 0000:03: resource 1 mem: [0xfdf00000-0xfdffffff]
pci_bus 0000:04: resource 0 io: [0xd000-0xdfff]
pci_bus 0000:04: resource 1 mem: [0xfe000000-0xfe9fffff]
pci_bus 0000:04: resource 2 pref mem [0xf6000000-0xf8efffff]
pci_bus 0000:06: resource 0 io: [0xe000-0xefff]
pci_bus 0000:06: resource 1 mem: [0xfea00000-0xfeafffff]
pci_bus 0000:06: resource 2 pref mem [0xf8f00000-0xf8ffffff]
pci_bus 0000:07: resource 1 mem: [0xfeb00000-0xfebfffff]
pci_bus 0000:07: resource 3 io: [0x00-0xffff]
pci_bus 0000:07: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 11277k freed
Simple Boot Flag at 0x51 set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1259159229.436:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 8057
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
alloc irq_desc for 26 on node 0
alloc kstat_irqs on node 0
pcieport-driver 0000:00:01.0: irq 26 for MSI/MSI-X
pcieport-driver 0000:00:01.0: setting latency timer to 64
alloc irq_desc for 27 on node 0
alloc kstat_irqs on node 0
pcieport-driver 0000:00:1c.0: irq 27 for MSI/MSI-X
pcieport-driver 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 28 on node 0
alloc kstat_irqs on node 0
pcieport-driver 0000:00:1c.1: irq 28 for MSI/MSI-X
pcieport-driver 0000:00:1c.1: setting latency timer to 64
alloc irq_desc for 29 on node 0
alloc kstat_irqs on node 0
pcieport-driver 0000:00:1c.2: irq 29 for MSI/MSI-X
pcieport-driver 0000:00:1c.2: setting latency timer to 64
alloc irq_desc for 30 on node 0
alloc kstat_irqs on node 0
pcieport-driver 0000:00:1c.5: irq 30 for MSI/MSI-X
pcieport-driver 0000:00:1c.5: setting latency timer to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: Using ACPI for slot detection.
pciehp 0000:00:1c.2:pcie04: HPC vendor_id 8086 device_id 2944 ss_vid 0 ss_did 0
pciehp 0000:00:1c.2:pcie04: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
acpiphp_glue: Slot 1 already registered by another hotplug driver
acpiphp_glue: Slot 1 already registered by another hotplug driver
acpiphp_glue: Slot 1 already registered by another hotplug driver
acpiphp_glue: Slot 1 already registered by another hotplug driver
acpiphp_glue: Slot 1 already registered by another hotplug driver
acpiphp_glue: Slot 1 already registered by another hotplug driver
acpiphp_glue: Slot 1 already registered by another hotplug driver
acpiphp_glue: Slot 1 already registered by another hotplug driver
ACPI: AC Adapter [AC0] (on-line)
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Lid Switch [LID]
ACPI: SSDT 00000000bff974d0 00248 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 00000000bff977b0 00765 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-3 state
Marking TSC unstable due to TSC halts in idle
Switched to high resolution mode on CPU 0
ACPI: CPU0 (power states: C1[C1] C2[C3])
processor LNXCPU:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 00000000bff97400 000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
ACPI: SSDT 00000000bff97720 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
Switched to high resolution mode on CPU 1
ACPI: CPU1 (power states: C1[C1] C2[C3])
processor LNXCPU:01: registered as cooling_device1
ACPI: Processor [CPU1] (supports 8 throttling states)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (32 C)
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input3
ahci 0000:00:1f.2: version 3.0
alloc irq_desc for 19 on node 0
alloc kstat_irqs on node 0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
alloc irq_desc for 31 on node 0
alloc kstat_irqs on node 0
ahci 0000:00:1f.2: irq 31 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x23 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff100 irq 31
ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 31
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff380 irq 31
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9fffc00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.31.5-127.fc12.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
alloc irq_desc for 23 on node 0
alloc kstat_irqs on node 0
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fff800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.31.5-127.fc12.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000bc00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.31.5-127.fc12.x86_64 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
alloc irq_desc for 21 on node 0
alloc kstat_irqs on node 0
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.31.5-127.fc12.x86_64 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000b800
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.31.5-127.fc12.x86_64 uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b480
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.31.5-127.fc12.x86_64 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.31.5-127.fc12.x86_64 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b080
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.31.5-127.fc12.x86_64 uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
PM: Resume from disk failed.
registered taskstats version 1
No TPM chip found, activating TPM-bypass!
Magic number: 1:321:486
rtc_cmos 00:03: setting system clock to 2009-11-25 14:27:09 UTC (1259159229)
Initalizing network drop monitor service
ACPI: Battery Slot [BAT0] (battery present)
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
ata1.00: ACPI cmd ef/10:06:00:00:00:a0 succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
ata1.00: ATA-8: ST9320421AS, SD14, max UDMA/133
ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
ata1.00: ACPI cmd ef/10:06:00:00:00:a0 succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST9320421AS SD14 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:
sd 0:0:0:0: Attached scsi generic sg0 type 0
sda1 sda2 sda3 sda4 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
usb 2-5: new high speed USB device using ehci_hcd and address 2
Clocksource tsc unstable (delta = -254509068 ns)
usb 2-5: New USB device found, idVendor=04f2, idProduct=b071
usb 2-5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
usb 2-5: Product: CNF7129
usb 2-5: Manufacturer: Chicony Electronics Co., Ltd.
usb 2-5: SerialNumber: SN0001
usb 2-5: configuration #1 chosen from 1 choice
usb 5-1: new full speed USB device using uhci_hcd and address 2
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04711/0x200000
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input5
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ACPI cmd ef/10:06:00:00:00:a0 succeeded
ata2.00: ATAPI: MATSHITADVD-RAM UJ870BJ, 1.02, max UDMA/33
ata2.00: ACPI cmd ef/10:06:00:00:00:a0 succeeded
ata2.00: configured for UDMA/33
scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ870BJ 1.02 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
ata6: SATA link down (SStatus 0 SControl 300)
Freeing unused kernel memory: 1324k freed
Write protecting the kernel read-only data: 6344k
dracut: dracut-002-13.4.git8f397a9b.fc12
udev: starting version 145
[drm] Initialized drm 1.1.0 20060810
pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:01:00.0: setting latency timer to 64
[drm] nouveau 0000:01:00.0: failed to evaluate _DSM: 5
[drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x096600c1)
[drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0
usb 5-1: New USB device found, idVendor=0b05, idProduct=1751
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-1: Product: BT-253
usb 5-1: Manufacturer: Broadcom Corp
usb 5-1: SerialNumber: 002243C57941
usb 5-1: configuration #1 chosen from 1 choice
dracut: Starting plymouth daemon
acpi device:1e: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:19/device:1a/input/input6
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
usb 5-2: new full speed USB device using uhci_hcd and address 3
usb 5-2: New USB device found, idVendor=08ff, idProduct=1600
usb 5-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 5-2: Product: Fingerprint Sensor
usb 5-2: configuration #1 chosen from 1 choice
dracut: Scanning devices sda5 for LVM volume groups
dracut: Reading all physical volumes. This may take a while...
dracut: Found volume group "VolGroup00" using metadata type lvm2
dracut: 2 logical volume(s) in volume group "VolGroup00" now active
SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
XFS mounting filesystem dm-0
Ending clean XFS mount for filesystem: dm-0
dracut: Mounted root filesystem /dev/mapper/VolGroup00-LogVol00
dracut: Switching root
udev: starting version 145
asus_laptop: Asus Laptop Support version 0.42
asus_laptop: N80Vn model detected
input: Asus Laptop extra buttons as /devices/virtual/input/input7
asus_laptop: Brightness ignored, must be controlled by ACPI video driver
iTCO_vendor_support: vendor-support=0
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
ricoh-mmc: Ricoh MMC Controller disabling driver
ricoh-mmc: Copyright(c) Philip Langdale
ricoh-mmc: Ricoh MMC controller found at 0000:07:03.2 [1180:0843] (rev 12)
ricoh-mmc: Controller is now disabled.
cfg80211: Calling CRDA to update world regulatory domain
firewire_ohci 0000:07:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
firewire_ohci: Added fw-ohci device 0000:07:03.0, OHCI version 1.0
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
r8169 0000:06:00.0: setting latency timer to 64
alloc irq_desc for 32 on node 0
alloc kstat_irqs on node 0
r8169 0000:06:00.0: irq 32 for MSI/MSI-X
eth0: RTL8168c/8111c at 0xffffc9001112c000, 00:24:8c:0b:cc:4b, XID 3c4000c0 IRQ 32
sdhci-pci 0000:07:03.1: SDHCI controller found [1180:0822] (rev 22)
sdhci-pci 0000:07:03.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
sdhci-pci 0000:07:03.1: Will use DMA mode even though HW doesn't fully claim to support it.
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:07:03.1] using DMA
Linux video capture interface: v2.00
firewire_core: created device fw0: GUID 001e8c00018dd2c7, S400
alloc irq_desc for 22 on node 0
alloc kstat_irqs on node 0
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
alloc irq_desc for 33 on node 0
alloc kstat_irqs on node 0
HDA Intel 0000:00:1b.0: irq 33 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
uvcvideo: Found UVC 1.00 device CNF7129 (04f2:b071)
ath9k 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
ath9k 0000:03:00.0: setting latency timer to 64
input: CNF7129 as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input8
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
cfg80211: World regulatory domain updated:
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
ath: EEPROM regdomain: 0x60
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x60
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
phy0: Selected rate control algorithm 'ath9k_rate_control'
Registered led device: ath9k-phy0::radio
Registered led device: ath9k-phy0::assoc
Registered led device: ath9k-phy0::tx
Registered led device: ath9k-phy0::rx
phy0: Atheros AR9280 MAC/BB Rev:2 AR5133 RF Rev:d0: mem=0xffffc900111a0000, irq=17
nvidia 0000:01:00.0: setting latency timer to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 190.42 Tue Oct 20 20:25:42 PDT 2009
device-mapper: multipath: version 1.1.0 loaded
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 2097144k swap on /dev/mapper/VolGroup00-LogVol01. Priority:-1 extents:1 across:2097144k
--
fedora-test-list mailing list
fedora-test-list@xxxxxxxxxx
To unsubscribe:
https://www.redhat.com/mailman/listinfo/fedora-test-list
