Today, when new updates were proposed, I saw also the ones about fprintd and fprintd-pam that I had already installed on my rawhide. So before applying them, I went to System -> Preferences -> About Me and I noticed I had only the "change Password.." button at the upper right corner of the window. After some seconds I saw two other buttons magically appearing (related to finger print setup). I decided to wait and apply the updates before beginning the setup. So I did and rebooted the system too (with kexec -l before shutdown, for what it could matter...). Now I have fprintd-0.1-9.git04fd09cfa.fc11.x86_64 and fprintd-pam-0.1-9.git04fd09cfa.fc11.x86_64 But in the same window as before, I don't see the finger print buttons coming up.... any hints? Pc is a laptop Dell XPS M1330 that worked almost well with fingerprint in F10 using thinkfinger (apart from random crash when I used finger from unlocking the screen saver...) lsusb gives: Bus 007 Device 002: ID 0483:2016 SGS Thomson Microelectronics Fingerprint Reader reading the page for F11 at http://fedoraproject.org/wiki/Features/Fingerprint it should suffice the gnome-about me page.... lshal gives this for the reader: udi = '/org/freedesktop/Hal/devices/usb_device_483_2016_noserial' info.bus = 'usb_device' (string) info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2' (string) info.product = 'Fingerprint Reader' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_483_2016_noserial' (string) info.vendor = 'SGS Thomson Microelectronics' (string) linux.device_file = '/dev/bus/usb/007/002' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb7/7-1' (string) usb_device.bus_number = 7 (0x7) (int) usb_device.can_wake_up = true (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 0 (0x0) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 1 (0x1) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = false (bool) usb_device.linux.device_number = 2 (0x2) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb7/7-1' (string) usb_device.max_power = 100 (0x64) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 0 (0x0) (int) usb_device.product = 'Fingerprint Reader' (string) usb_device.product_id = 8214 (0x2016) (int) usb_device.speed = 12.0 (12) (double) usb_device.vendor = 'SGS Thomson Microelectronics' (string) usb_device.vendor_id = 1155 (0x483) (int) usb_device.version = 1.0 (1) (double) Thanks in advance, Gianluca -- fedora-test-list mailing list fedora-test-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-test-list