--- Jim Cornette <fct-cornette@xxxxxxxxxxxxxx> wrote:
> Antonio M wrote:
> >>
> > am I the only one to have these kind of problems,
> or am I the only one
> > to run selinux as enforced??? :-)
> >
>
> No, I needed to run setenforce 0 to allow X to
> start. (Logging in as
> root, starting X from a regular user terminal)
>
> The settings manager for gnome is broken also.
> Jim
> --
> You've always made the mistake of being yourself.
> -- Eugene Ionesco
> >
> X.Org X Server 1.4.99.1
> Release Date: 5 September 2007
> X Protocol Version 11, Revision 0
> Build Operating System: Linux 2.6.20-1.2952.fc6 i686
>
> Current Operating System: Linux HP-JCF7
> 2.6.23.8-63.fc8 #1 SMP Wed Nov 21 18:51:08 EST 2007
> i686
> Build Date: 10 December 2007 05:01:20PM
> Build ID: xorg-x11-server 1.4.99.1-0.13.fc9
> Before reporting problems, check http://wiki.x.org
> to make sure that you have the latest version.
> Module Loader present
> Markers: (--) probed, (**) from config file, (==)
> default setting,
> (++) from command line, (!!) notice, (II)
> informational,
> (WW) warning, (EE) error, (NI) not implemented,
> (??) unknown.
> (==) Log file: "/var/log/Xorg.0.log", Time: Wed Dec
> 12 17:07:24 2007
> (==) Using config file: "/etc/X11/xorg.conf"
> (==) ServerLayout "single head configuration"
> (**) |-->Screen "Screen0" (0)
> (**) | |-->Monitor "Monitor0"
> (**) | |-->Device "Videocard0"
> (**) |-->Input Device "Keyboard0"
> (**) |-->Input Device "Synaptics"
> (==) Automatically adding devices
> (==) Automatically enabling devices
> (==) No FontPath specified. Using compiled-in
> default.
> (==) FontPath set to:
> catalogue:/etc/X11/fontpath.d,
> built-ins
> (==) ModulePath set to "/usr/lib/xorg/modules"
> (II) No default mouse found, adding one
> (**) |-->Input Device "<default pointer>"
> (WW) Open ACPI failed (/var/run/acpid.socket) (No
> such file or directory)
> (II) No APM support in BIOS or kernel
> (II) Loader magic: 0x81e9420
> (II) Module ABI versions:
> X.Org ANSI C Emulation: 0.3
> X.Org Video Driver: 3.0
> X.Org XInput driver : 2.0
> X.Org Server Extension : 0.3
> X.Org Font Renderer : 0.5
> (II) Loader running on linux
> (--) using VT number 7
>
> (WW) xf86OpenConsole: chown /dev/tty7 failed:
> Operation not permitted
> (WW) xf86OpenConsole: chown /dev/tty0 failed:
> Operation not permitted
> (--) PCI:*(0@1:5:0) unknown vendor (0x1002) Radeon
> Mobility U1 rev 0, Mem @ 0xe0000000/0, 0xd0100000/0,
> I/O @ 0x00009000/0, BIOS @ 0x????????/131072
> (II) System resource ranges:
> [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
> [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
> (II) LoadModule: "extmod"
> (II) Loading
> /usr/lib/xorg/modules/extensions//libextmod.so
> (II) Module extmod: vendor="X.Org Foundation"
> compiled for 1.4.99.1, module version = 1.0.0
> Module class: X.Org Server Extension
> ABI class: X.Org Server Extension, version 0.3
> (II) Loading extension SHAPE
> (II) Loading extension MIT-SUNDRY-NONSTANDARD
> (II) Loading extension BIG-REQUESTS
> (II) Loading extension SYNC
> (II) Loading extension MIT-SCREEN-SAVER
> (II) Loading extension XC-MISC
> (II) Loading extension XFree86-VidModeExtension
> (II) Loading extension XFree86-Misc
> (II) Loading extension XFree86-DGA
> (II) Loading extension DPMS
> (II) Loading extension TOG-CUP
> (II) Loading extension Extended-Visual-Information
> (II) Loading extension XVideo
> (II) Loading extension XVideo-MotionCompensation
> (II) Loading extension X-Resource
> (II) LoadModule: "dbe"
> (II) Loading
> /usr/lib/xorg/modules/extensions//libdbe.so
> (II) Module dbe: vendor="X.Org Foundation"
> compiled for 1.4.99.1, module version = 1.0.0
> Module class: X.Org Server Extension
> ABI class: X.Org Server Extension, version 0.3
> (II) Loading extension DOUBLE-BUFFER
> (II) LoadModule: "glx"
> (II) Loading
> /usr/lib/xorg/modules/extensions//libglx.so
> (II) Module glx: vendor="X.Org Foundation"
> compiled for 1.4.99.1, module version = 1.0.0
> ABI class: X.Org Server Extension, version 0.3
> (==) AIGLX enabled
> (==) Exporting typical set of GLX visuals
> (II) Loading extension GLX
> (II) LoadModule: "freetype"
> (II) Loading
> /usr/lib/xorg/modules/fonts//libfreetype.so
> (II) Module freetype: vendor="X.Org Foundation & the
> After X-TT Project"
> compiled for 1.4.99.1, module version = 2.1.0
> Module class: X.Org Font Renderer
> ABI class: X.Org Font Renderer, version 0.5
> (II) Loading font FreeType
> (II) LoadModule: "record"
> (II) Loading
> /usr/lib/xorg/modules/extensions//librecord.so
> (II) Module record: vendor="X.Org Foundation"
> compiled for 1.4.99.1, module version = 1.13.0
> Module class: X.Org Server Extension
> ABI class: X.Org Server Extension, version 0.3
> (II) Loading extension RECORD
> (II) LoadModule: "dri"
> (II) Loading
> /usr/lib/xorg/modules/extensions//libdri.so
> (II) Module dri: vendor="X.Org Foundation"
> compiled for 1.4.99.1, module version = 1.0.0
> ABI class: X.Org Server Extension, version 0.3
> (II) Loading extension XFree86-DRI
> (II) LoadModule: "radeon"
> (II) Loading
> /usr/lib/xorg/modules/drivers//radeon_drv.so
> (II) Module radeon: vendor="X.Org Foundation"
> compiled for 1.4.0.1, module version = 4.3.0
> Module class: X.Org Video Driver
> ABI class: X.Org Video Driver, version 3.0
> (II) LoadModule: "ati"
> (II) Loading
> /usr/lib/xorg/modules/drivers//ati_drv.so
> (II) Module ati: vendor="X.Org Foundation"
> compiled for 1.4.0.1, module version = 6.7.195
> Module class: X.Org Video Driver
> ABI class: X.Org Video Driver, version 3.0
> (II) LoadModule: "kbd"
> (II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
> (II) Module kbd: vendor="X.Org Foundation"
> compiled for 1.4.0.1, module version = 1.2.2
> Module class: X.Org XInput Driver
> ABI class: X.Org XInput driver, version 2.0
> (II) LoadModule: "synaptics"
> (II) Loading
> /usr/lib/xorg/modules/input//synaptics_drv.so
> (II) Module synaptics: vendor="X.Org Foundation"
> compiled for 4.3.99.902, module version = 1.0.0
> Module class: X.Org XInput Driver
> ABI class: X.Org XInput driver, version 2.0
> (II) LoadModule: "mouse"
> (II) Loading
> /usr/lib/xorg/modules/input//mouse_drv.so
> (II) Module mouse: vendor="X.Org Foundation"
> compiled for 1.4.0.1, module version = 1.2.3
> Module class: X.Org XInput Driver
> ABI class: X.Org XInput driver, version 2.0
> (II) ATI: ATI driver wrapper (version 6.7.195) for
> chipsets: mach64, rage128, radeon
> (II) Primary Device is: PCI 01@00:05:0
> (WW) Falling back to old probe method for ati
> (II) Loading sub module "radeon"
> (II) LoadModule: "radeon"
> (II) Reloading
> /usr/lib/xorg/modules/drivers//radeon_drv.so
> (II) RADEON: Driver for ATI Radeon chipsets: ATI
> Radeon QD (AGP),
> ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI
> Radeon QG (AGP),
> ATI Radeon VE/7000 QY (AGP/PCI), ATI Radeon VE/7000
> QZ (AGP/PCI),
> ATI ES1000 515E (PCI), ATI ES1000 5969 (PCI),
> ATI Radeon Mobility M7 LW (AGP),
> ATI Mobility FireGL 7800 M7 LX (AGP),
> ATI Radeon Mobility M6 LY (AGP), ATI Radeon
> Mobility M6 LZ (AGP),
> ATI Radeon IGP320 (A3) 4136, ATI Radeon IGP320M
> (U1) 4336,
> ATI Radeon IGP330/340/350 (A4) 4137,
> ATI Radeon IGP330M/340M/350M (U2) 4337,
> ATI Radeon 7000 IGP (A4+) 4237, ATI Radeon Mobility
> 7000 IGP 4437,
> ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL
> (AGP),
> ATI Radeon 9100 QM (AGP), ATI Radeon 8500 AIW BB
> (AGP),
> ATI Radeon 8500 AIW BC (AGP), ATI Radeon 7500 QW
> (AGP/PCI),
> ATI Radeon 7500 QX (AGP/PCI), ATI Radeon 9000/PRO
> If (AGP/PCI),
> ATI Radeon 9000 Ig (AGP/PCI), ATI FireGL Mobility
> 9000 (M9) Ld (AGP),
> ATI Radeon Mobility 9000 (M9) Lf (AGP),
> ATI Radeon Mobility 9000 (M9) Lg (AGP),
> ATI Radeon 9100 IGP (A5) 5834,
>
=== message truncated ===> --
> fedora-test-list mailing list
> fedora-test-list@xxxxxxxxxx
> To unsubscribe:
>
https://www.redhat.com/mailman/listinfo/fedora-test-list
I had the same problem upon rebooting, and good thing
I read the mails from this list and used
a for append, added a 3 and enforcing=0 to the kernel
parameters. Have not gotten to kernel 83 yet, but
will try to do so. If it boots for me, I;ll report
back and hopefully selinux does not get in the way
upon booting with default options for me which is
enforcing.
Here's what I got without using enforcing=0 as a
kernel option:
BTW, without enforcing=0, startx fails when booting
with 83 kernel.
Regards,
Antonio
____________________________________________________________________________________
Never miss a thing. Make Yahoo your home page.
http://www.yahoo.com/r/hsScript started on Wed 12 Dec 2007 06:55:53 PM CST
[olivares@localhost ~]$ startx
xauth: creating new authority file /home/olivares/.serverauth.2940
X.Org X Server 1.4.0.1
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.20-1.3002.fc6xen i686
Current Operating System: Linux localhost 2.6.24-0.81.rc4.git7.fc9 #1 SMP Mon Dec 10 15:31:30 EST 2007 i686
Build Date: 13 November 2007 05:47:17PM
Build ID: xorg-x11-server 1.4.99.1-0.10.fc9
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Dec 12 18:55:55 2007
(==) Using config file: "/etc/X11/xorg.conf"
(II) Module "i2c" already built-in
(II) Module "ddc" already built-in
(II) Module "ramdac" already built-in
Failed to execute message bus daemon /bin/dbus-daemon: Permission denied. Will try again without full path.
Failed to execute message bus daemon: Permission denied
EOF in dbus-launch reading address from bus daemon
waiting for X server to shut down
Backtrace:
0: X(xf86SigHandler+0x79) [0x80cb8c9]
1: [0x110420]
2: /lib/libc.so.6(cfree+0x4c) [0x8d10ac]
3: /usr/lib/xorg/modules/extensions//libGLcore.so(_mesa_free+0x1d) [0x387bfd]
4: /usr/lib/xorg/modules/extensions//libGLcore.so(XMesaDestroyVisual+0x1d) [0x5221dd]
5: /usr/lib/xorg/modules/extensions//libglx.so [0x20439f]
6: /usr/lib/xorg/modules/extensions//libglx.so [0x204569]
7: X(main+0x516) [0x806cff6]
8: /lib/libc.so.6(__libc_start_main+0xe0) [0x87a390]
9: X(FontFileCompleteXLFD+0x245) [0x806c261]
Fatal server error:
Caught signal 11. Server aborting
Couldnt get a file descriptor referring to the console
[olivares@localhost ~]$ dmesg
Initializing cgroup subsys cpuset
Linux version 2.6.24-0.81.rc4.git7.fc9 (kojibuilder@) (gcc version 4.1.2 20071124 (Red Hat 4.1.2-35)) #1 SMP Mon Dec 10 15:31:30 EST 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000002ffd0000 (usable)
BIOS-e820: 000000002ffd0000 - 000000002ffdf000 (ACPI data)
BIOS-e820: 000000002ffdf000 - 0000000030000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
767MB LOWMEM available.
Using x86 segment limits to approximate NX protection
Entering add_active_range(0, 0, 196560) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 196560
HighMem 196560 -> 196560
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 196560
On node 0 totalpages: 196560
DMA zone: 56 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4040 pages, LIFO batch:0
Normal zone: 2631 pages used for memmap
Normal zone: 189833 pages, LIFO batch:31
HighMem zone: 0 pages used for memmap
Movable zone: 0 pages used for memmap
DMI 2.3 present.
Using APIC driver default
ACPI: RSDP 000F97A0, 0014 (r0 ACPIAM)
ACPI: RSDT 2FFD0000, 0030 (r1 A M I OEMRSDT 11000325 MSFT 97)
ACPI: FACP 2FFD0200, 0081 (r2 A M I OEMFACP 11000325 MSFT 97)
ACPI: DSDT 2FFD03F0, 39BF (r1 A0007 A0007000 1 INTL 2002026)
ACPI: FACS 2FFDF000, 0040
ACPI: APIC 2FFD0390, 005E (r1 A M I OEMAPIC 11000325 MSFT 97)
ACPI: OEMB 2FFDF040, 0041 (r1 A M I OEMBIOS 11000325 MSFT 97)
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 6:10 APIC version 16
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 40000000 (gap: 30000000:cec00000)
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 193873
Kernel command line: ro root=/dev/VolGroup00/LogVol00
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c0827000 soft=c0807000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1913.168 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES: 8
... MAX_LOCK_DEPTH: 30
... MAX_LOCKDEP_KEYS: 2048
... CLASSHASH_SIZE: 1024
... MAX_LOCKDEP_ENTRIES: 8192
... MAX_LOCKDEP_CHAINS: 16384
... CHAINHASH_SIZE: 8192
memory used by lock dependency info: 1024 kB
per task-struct memory footprint: 1680 bytes
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 763596k/786240k available (2325k kernel code, 22064k reserved, 1188k data, 576k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xffc53000 - 0xfffff000 (3760 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf0800000 - 0xff7fe000 ( 239 MB)
lowmem : 0xc0000000 - 0xeffd0000 ( 767 MB)
.init : 0xc0774000 - 0xc0804000 ( 576 kB)
.data : 0xc0645697 - 0xc076e924 (1188 kB)
.text : 0xc0400000 - 0xc0645697 (2325 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
Calibrating delay using timer specific routine.. 3829.73 BogoMIPS (lpj=1914866)
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 0383f3ff c1c3fbff 00000000 00000420 00000000 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
ACPI: Core revision 20070126
CPU0: AMD Athlon(tm) XP 2600+ stepping 00
Total of 1 processors activated (3829.73 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
APIC calibration not consistent with PM Timer: 97ms instead of 100ms
APIC delta adjusted to PM-Timer: 2079543 (2037622)
Brought up 1 CPUs
sizeof(vma)=84 bytes
sizeof(page)=56 bytes
sizeof(inode)=604 bytes
sizeof(dentry)=160 bytes
sizeof(ext3inode)=856 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=176 bytes
sizeof(task_struct)=3552 bytes
CPU0 attaching sched-domain:
domain 0: span 00000001
groups: 00000001
khelper used greatest stack depth: 2920 bytes left
net_namespace: 80 bytes
Booting paravirtualized kernel on bare hardware
Time: 0:53:14 Date: 12/13/07
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: nForce2 C1 Halt Disconnect fixup
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 18) *11
ACPI: PCI Interrupt Link [LNKC] (IRQs 18) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22) *10
ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21 22) *7
ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22) *5
ACPI: PCI Interrupt Link [LKLN] (IRQs 20 21 22) *11
ACPI: PCI Interrupt Link [LAPU] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [LAUI] (IRQs 20 21 22) *11
ACPI: PCI Interrupt Link [LKMO] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [LKSM] (IRQs 23) *10
ACPI: PCI Interrupt Link [LFWR] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [LETH] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22) *14
ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 86, should be 7B [20070126]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
ACPI: RTC can wake from S4
Time: tsc clocksource has been installed.
system 00:06: ioport range 0x4d0-0x4d1 has been reserved
system 00:07: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:07: iomem range 0xfee00000-0xfeefffff could not be reserved
system 00:07: iomem range 0xff780000-0xff7bffff has been reserved
system 00:09: ioport range 0x480-0x487 has been reserved
system 00:09: ioport range 0xd00-0xd07 has been reserved
system 00:0c: iomem range 0x0-0x9ffff could not be reserved
system 00:0c: iomem range 0xc0000-0xdffff could not be reserved
system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
system 00:0c: iomem range 0x100000-0x2fffffff could not be reserved
system 00:0c: iomem range 0xff7c0000-0xffffffff could not be reserved
PCI: Bridge: 0000:00:08.0
IO window: d000-dfff
MEM window: fbd00000-fbefffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: disabled.
MEM window: fbf00000-fe0fffff
PREFETCH window: e3c00000-f3bfffff
PCI: Setting latency timer of device 0000:00:08.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 9, 2359296 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 3120k freed
khelper used greatest stack depth: 2784 bytes left
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1197507194.697:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Switched to high resolution mode on CPU 0
0000:00:02.0 OHCI: BIOS handoff failed (BIOS bug ?) 000007b4
Boot video device is 0000:02:00.0
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Non-volatile memory driver v1.2
Linux agpgart interface v0.103
agpgart: Detected NVIDIA nForce2 chipset
agpgart: AGP aperture is 64M @ 0xf4000000
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 18
ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [LNKC] -> GSI 18 (level, high) -> IRQ 16
0000:01:08.0: ttyS2 at I/O 0xd828 (irq = 16) is a 8250
0000:01:08.0: ttyS3 at I/O 0xd840 (irq = 16) is a 8250
Couldn't register serial port 0000:01:08.0: -28
khelper used greatest stack depth: 2672 bytes left
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
input: Macintosh mouse button emulation as /class/input/input0
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input1
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
powernow-k8: Processor cpuid 6a0 not supported
Using IPI No-Shortcut mode
registered taskstats version 1
Magic number: 3:349:860
Freeing unused kernel memory: 576k freed
Write protecting the kernel read-only data: 920k
ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [LUS2] -> GSI 22 (level, high) -> IRQ 17
PCI: Setting latency timer of device 0000:00:02.2 to 64
ehci_hcd 0000:00:02.2: EHCI Host Controller
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.2: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.2
ehci_hcd 0000:00:02.2: irq 17, io mem 0xfeb00000
ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
insmod used greatest stack depth: 1892 bytes left
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 21 (level, high) -> IRQ 18
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 18, io mem 0xfe900000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ACPI: PCI Interrupt Link [LUS1] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS1] -> GSI 20 (level, high) -> IRQ 19
PCI: Setting latency timer of device 0000:00:02.1 to 64
ohci_hcd 0000:00:02.1: OHCI Host Controller
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:02.1: irq 19, io mem 0xfea00000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
insmod used greatest stack depth: 1868 bytes left
USB Universal Host Controller Interface driver v3.0
SCSI subsystem initialized
libata version 3.00 loaded.
PCI: Setting latency timer of device 0000:00:09.0 to 64
usb 2-2: new full speed USB device using ohci_hcd and address 2
usb 2-2: configuration #1 chosen from 1 choice
usb 3-1: new low speed USB device using ohci_hcd and address 2
usb 3-1: configuration #1 chosen from 1 choice
input: HID 1241:1177 as /class/input/input2
input,hidraw0: USB HID v1.10 Mouse [HID 1241:1177] on usb-0000:00:02.1-1
pata_amd 0000:00:09.0: version 0.3.10
PCI: Setting latency timer of device 0000:00:09.0 to 64
scsi0 : pata_amd
scsi1 : pata_amd
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
ACPI Exception (exoparg2-0442): AE_AML_PACKAGE_LIMIT, Index (0FFFFFFFF) is beyond end of object [20070126]
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.GTM_] (Node ef83c400), AE_AML_PACKAGE_LIMIT
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN0._GTM] (Node ef83ef80), AE_AML_PACKAGE_LIMIT
ata1: ACPI get timing mode failed (AE 0x300d)
ata1.00: ATA-7: MAXTOR STM3320620A, 3.AAD, max UDMA/100
ata1.00: 625142448 sectors, multi 16: LBA48
ata1.00: configured for UDMA/100
ACPI Exception (exoparg2-0442): AE_AML_PACKAGE_LIMIT, Index (0FFFFFFFF) is beyond end of object [20070126]
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.GTM_] (Node ef83c400), AE_AML_PACKAGE_LIMIT
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN1._GTM] (Node ef83c200), AE_AML_PACKAGE_LIMIT
ata2: ACPI get timing mode failed (AE 0x300d)
ata2.00: ATAPI: TSSTcorpCD/DVDW SH-S182D, SB03, max UDMA/33
ata2.01: ATAPI: SONY CD-RW CRX216E, PD01, max UDMA/33
ata2.00: configured for UDMA/33
ata2.01: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA MAXTOR STM332062 3.AA PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 sda6 > sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 1:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S182D SB03 PQ: 0 ANSI: 5
scsi 1:0:1:0: CD-ROM SONY CD-RW CRX216E PD01 PQ: 0 ANSI: 5
insmod used greatest stack depth: 820 bytes left
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@xxxxxxxxxx
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
audit(1197507221.167:2): enforcing=1 old_enforcing=0 auid=4294967295
SELinux:8192 avtab hash slots allocated.Num of rules:149698
SELinux:8192 avtab hash slots allocated.Num of rules:149698
security: 8 users, 12 roles, 2087 types, 104 bools, 1 sens, 1024 cats
security: 67 classes, 149698 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext3), uses xattr
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: policy loaded with handle_unknown=allow
audit(1197507222.151:3): policy loaded auid=4294967295
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Attached scsi generic sg1 type 5
scsi 1:0:1:0: Attached scsi generic sg2 type 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr1: scsi3-mmc drive: 80x/48x writer cd/rw xa/form2 cdda tray
sr 1:0:1:0: Attached scsi CD-ROM sr1
input: Power Button (FF) as /class/input/input3
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input4
ACPI: Power Button (CM) [PWRB]
i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4300
i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4340
usblp0: Disabling reads from problematic bidirectional printer
usblp0: USB Unidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0304
usbcore: registered new interface driver usblp
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
ACPI: PCI Interrupt Link [LKLN] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LKLN] -> GSI 22 (level, high) -> IRQ 17
PCI: Setting latency timer of device 0000:00:04.0 to 64
input: PC Speaker as /class/input/input5
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k
forcedeth 0000:00:04.0: ifname eth0, PHY OUI 0x20 @ 1, addr 00:0e:a6:42:59:af
forcedeth 0000:00:04.0: timirq lnktim desc-v1
ACPI: PCI Interrupt Link [LAUI] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LAUI] -> GSI 21 (level, high) -> IRQ 18
PCI: Setting latency timer of device 0000:00:06.0 to 64
intel8x0_measure_ac97_clock: measured 50875 usecs
intel8x0: clocking to 47418
audit(1197507232.233:4): avc: denied { search } for pid=1130 comm="salsa" name="nscd" dev=dm-0 ino=3309695 scontext=system_u:system_r:alsa_t:s0-s0:c0.c1023 tcontext=system_u:object_r:nscd_var_run_t:s0 tclass=dir
audit(1197507232.233:5): avc: denied { search } for pid=1130 comm="salsa" name="nscd" dev=dm-0 ino=3309695 scontext=system_u:system_r:alsa_t:s0-s0:c0.c1023 tcontext=system_u:object_r:nscd_var_run_t:s0 tclass=dir
audit(1197507232.234:6): avc: denied { search } for pid=1127 comm="salsa" name="nscd" dev=dm-0 ino=3309695 scontext=system_u:system_r:alsa_t:s0-s0:c0.c1023 tcontext=system_u:object_r:nscd_var_run_t:s0 tclass=dir
audit(1197507232.234:7): avc: denied { search } for pid=1127 comm="salsa" name="nscd" dev=dm-0 ino=3309695 scontext=system_u:system_r:alsa_t:s0-s0:c0.c1023 tcontext=system_u:object_r:nscd_var_run_t:s0 tclass=dir
audit(1197507232.235:8): avc: denied { search } for pid=1133 comm="salsa" name="nscd" dev=dm-0 ino=3309695 scontext=system_u:system_r:alsa_t:s0-s0:c0.c1023 tcontext=system_u:object_r:nscd_var_run_t:s0 tclass=dir
audit(1197507232.235:9): avc: denied { search } for pid=1133 comm="salsa" name="nscd" dev=dm-0 ino=3309695 scontext=system_u:system_r:alsa_t:s0-s0:c0.c1023 tcontext=system_u:object_r:nscd_var_run_t:s0 tclass=dir
audit(1197507232.236:10): avc: denied { search } for pid=1135 comm="salsa" name="nscd" dev=dm-0 ino=3309695 scontext=system_u:system_r:alsa_t:s0-s0:c0.c1023 tcontext=system_u:object_r:nscd_var_run_t:s0 tclass=dir
audit(1197507232.236:11): avc: denied { search } for pid=1135 comm="salsa" name="nscd" dev=dm-0 ino=3309695 scontext=system_u:system_r:alsa_t:s0-s0:c0.c1023 tcontext=system_u:object_r:nscd_var_run_t:s0 tclass=dir
audit(1197507232.237:12): avc: denied { search } for pid=1139 comm="salsa" name="nscd" dev=dm-0 ino=3309695 scontext=system_u:system_r:alsa_t:s0-s0:c0.c1023 tcontext=system_u:object_r:nscd_var_run_t:s0 tclass=dir
audit(1197507232.237:13): avc: denied { search } for pid=1139 comm="salsa" name="nscd" dev=dm-0 ino=3309695 scontext=system_u:system_r:alsa_t:s0-s0:c0.c1023 tcontext=system_u:object_r:nscd_var_run_t:s0 tclass=dir
audit(1197507232.279:14): avc: denied { search } for pid=1127 comm="alsactl" name="nscd" dev=dm-0 ino=3309695 scontext=system_u:system_r:alsa_t:s0-s0:c0.c1023 tcontext=system_u:object_r:nscd_var_run_t:s0 tclass=dir
audit(1197507232.280:15): avc: denied { search } for pid=1127 comm="alsactl" name="nscd" dev=dm-0 ino=3309695 scontext=system_u:system_r:alsa_t:s0-s0:c0.c1023 tcontext=system_u:object_r:nscd_var_run_t:s0 tclass=dir
audit(1197507232.288:16): avc: denied { search } for pid=1130 comm="alsactl" name="nscd" dev=dm-0 ino=3309695 scontext=system_u:system_r:alsa_t:s0-s0:c0.c1023 tcontext=system_u:object_r:nscd_var_run_t:s0 tclass=dir
audit(1197507232.288:17): avc: denied { search } for pid=1130 comm="alsactl" name="nscd" dev=dm-0 ino=3309695 scontext=system_u:system_r:alsa_t:s0-s0:c0.c1023 tcontext=system_u:object_r:nscd_var_run_t:s0 tclass=dir
audit(1197507232.290:18): avc: denied { search } for pid=1133 comm="alsactl" name="nscd" dev=dm-0 ino=3309695 scontext=system_u:system_r:alsa_t:s0-s0:c0.c1023 tcontext=system_u:object_r:nscd_var_run_t:s0 tclass=dir
audit(1197507232.291:19): avc: denied { search } for pid=1133 comm="alsactl" name="nscd" dev=dm-0 ino=3309695 scontext=system_u:system_r:alsa_t:s0-s0:c0.c1023 tcontext=system_u:object_r:nscd_var_run_t:s0 tclass=dir
audit(1197507232.296:20): avc: denied { search } for pid=1135 comm="alsactl" name="nscd" dev=dm-0 ino=3309695 scontext=system_u:system_r:alsa_t:s0-s0:c0.c1023 tcontext=system_u:object_r:nscd_var_run_t:s0 tclass=dir
audit(1197507232.296:21): avc: denied { search } for pid=1135 comm="alsactl" name="nscd" dev=dm-0 ino=3309695 scontext=system_u:system_r:alsa_t:s0-s0:c0.c1023 tcontext=system_u:object_r:nscd_var_run_t:s0 tclass=dir
audit(1197507232.308:22): avc: denied { search } for pid=1139 comm="alsactl" name="nscd" dev=dm-0 ino=3309695 scontext=system_u:system_r:alsa_t:s0-s0:c0.c1023 tcontext=system_u:object_r:nscd_var_run_t:s0 tclass=dir
audit(1197507232.309:23): avc: denied { search } for pid=1139 comm="alsactl" name="nscd" dev=dm-0 ino=3309695 scontext=system_u:system_r:alsa_t:s0-s0:c0.c1023 tcontext=system_u:object_r:nscd_var_run_t:s0 tclass=dir
EXT3 FS on dm-0, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sda3, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Adding 1574328k swap on /dev/sda5. Priority:-1 extents:1 across:1574328k
Adding 1540088k swap on /dev/mapper/VolGroup00-LogVol01. Priority:-2 extents:1 across:1540088k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
warning: process `kudzu' used the deprecated sysctl system call with 1.23.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (12288 buckets, 49152 max)
audit(1197507240.018:24): audit_pid=1700 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
eth0: no IPv6 routers present
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.9
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
[olivares@localhost ~]$ exit
exit
Script done on Wed 12 Dec 2007 06:56:04 PM CST
--
fedora-test-list mailing list
fedora-test-list@xxxxxxxxxx
To unsubscribe:
https://www.redhat.com/mailman/listinfo/fedora-test-list
