Gordon Messmer wrote:
Chuck Ebbert wrote:
What is displayed on consoles 3 and 4?
No errors. Console 3 lists a number of modules loaded, and several
inserted, ending with /tmp/loop.ko. Console 4 has normal looking kernel
messages ending with:
<4>loader used greatest stack depth: 2296 bytes left
<6>loop: module loaded
So... I left the laptop alone for a few minutes, and it eventually moved
on. The anaconda log is confusing. It indicates that several modules
were inserted seconds after loop, but those weren't printed on the
console at that time. The 'dmesg' output indicates:
Clocksource tsc unstable (delta = -139639622012 ns)
...immediately after "loop: module loaded". I have no idea what this
all means, but I'm inclined to think that the times represented in
anaconda.log are incorrect.
19:43:24 INFO : kernel command line:
19:43:24 INFO : 1017164 kB are available
19:43:24 INFO : modules to insert cramfs fat vfat sunrpc lockd nfs_acl nfs loop isofs floppy edd pcspkr squashfs jbd mbcache ext3 ext2
19:43:24 DEBUG : getModuleLocation: 2.6.23-0.214.rc8.git2.fc8/i586
19:43:24 INFO : loaded cramfs from /modules/modules.cgz
19:43:24 INFO : loaded fat from /modules/modules.cgz
19:43:24 INFO : loaded vfat from /modules/modules.cgz
19:43:24 INFO : loaded sunrpc from /modules/modules.cgz
19:43:24 INFO : loaded lockd from /modules/modules.cgz
19:43:24 INFO : loaded nfs_acl from /modules/modules.cgz
19:43:24 INFO : loaded nfs from /modules/modules.cgz
19:43:24 INFO : loaded loop from /modules/modules.cgz
19:43:24 INFO : loaded floppy from /modules/modules.cgz
19:43:24 INFO : loaded edd from /modules/modules.cgz
19:43:24 INFO : loaded pcspkr from /modules/modules.cgz
19:43:24 INFO : loaded squashfs from /modules/modules.cgz
19:43:24 INFO : loaded jbd from /modules/modules.cgz
19:43:24 INFO : loaded mbcache from /modules/modules.cgz
19:43:24 INFO : loaded ext3 from /modules/modules.cgz
19:43:24 INFO : loaded ext2 from /modules/modules.cgz
19:43:24 DEBUG : module(s) isofs not found
19:43:24 INFO : inserted /tmp/cramfs.ko
19:43:24 INFO : inserted /tmp/fat.ko
19:43:24 INFO : inserted /tmp/vfat.ko
19:43:24 INFO : inserted /tmp/sunrpc.ko
19:43:24 INFO : inserted /tmp/lockd.ko
19:43:24 INFO : inserted /tmp/nfs_acl.ko
19:43:25 INFO : inserted /tmp/nfs.ko
19:43:25 INFO : inserted /tmp/loop.ko
19:43:28 WARNING : failed to insert module (19)
19:43:28 ERROR : failed to insert /tmp/floppy.ko
19:43:28 INFO : inserted /tmp/edd.ko
19:43:28 INFO : inserted /tmp/pcspkr.ko
19:43:28 INFO : inserted /tmp/squashfs.ko
19:43:28 INFO : inserted /tmp/jbd.ko
19:43:28 INFO : inserted /tmp/mbcache.ko
19:43:28 INFO : inserted /tmp/ext3.ko
19:43:28 INFO : inserted /tmp/ext2.ko
19:43:28 INFO : load module set done
19:43:28 INFO : modules to insert ipv6
19:43:28 DEBUG : getModuleLocation: 2.6.23-0.214.rc8.git2.fc8/i586
19:43:28 INFO : loaded ipv6 from /modules/modules.cgz
19:43:28 INFO : inserted /tmp/ipv6.ko
19:43:28 INFO : load module set done
19:43:28 INFO : modules to insert cdrom ide-cd
19:43:28 DEBUG : getModuleLocation: 2.6.23-0.214.rc8.git2.fc8/i586
19:43:28 INFO : loaded cdrom from /modules/modules.cgz
19:43:28 DEBUG : module(s) ide-cd not found
19:43:28 INFO : inserted /tmp/cdrom.ko
19:43:28 INFO : load module set done
19:43:28 INFO : modules to insert scsi_mod sd_mod sr_mod
19:43:28 DEBUG : getModuleLocation: 2.6.23-0.214.rc8.git2.fc8/i586
19:43:28 INFO : loaded scsi_mod from /modules/modules.cgz
19:43:28 INFO : loaded sd_mod from /modules/modules.cgz
19:43:28 INFO : loaded sr_mod from /modules/modules.cgz
19:43:29 INFO : inserted /tmp/scsi_mod.ko
19:43:29 INFO : inserted /tmp/sd_mod.ko
19:43:29 INFO : inserted /tmp/sr_mod.ko
19:43:29 INFO : load module set done
19:43:29 INFO : modules to insert scsi_transport_iscsi libiscsi iscsi_tcp
19:43:29 DEBUG : getModuleLocation: 2.6.23-0.214.rc8.git2.fc8/i586
19:43:29 INFO : loaded scsi_transport_iscsi from /modules/modules.cgz
19:43:29 INFO : loaded libiscsi from /modules/modules.cgz
19:43:29 INFO : loaded iscsi_tcp from /modules/modules.cgz
19:43:29 INFO : inserted /tmp/scsi_transport_iscsi.ko
19:43:29 INFO : inserted /tmp/libiscsi.ko
19:43:29 INFO : inserted /tmp/iscsi_tcp.ko
19:43:29 INFO : load module set done
19:43:29 INFO : looking for usb controllers
19:43:29 INFO : found USB controller ehci-hcd
19:43:29 INFO : modules to insert ehci-hcd
19:43:29 DEBUG : getModuleLocation: 2.6.23-0.214.rc8.git2.fc8/i586
19:43:29 INFO : loaded ehci-hcd from /modules/modules.cgz
19:43:29 INFO : inserted /tmp/ehci-hcd.ko
19:43:29 INFO : load module set done
19:43:29 INFO : found USB controller uhci-hcd
19:43:29 INFO : modules to insert uhci-hcd
19:43:29 DEBUG : getModuleLocation: 2.6.23-0.214.rc8.git2.fc8/i586
19:43:30 INFO : loaded uhci-hcd from /modules/modules.cgz
19:43:30 INFO : inserted /tmp/uhci-hcd.ko
19:43:30 INFO : load module set done
19:43:30 INFO : found USB controller uhci-hcd
19:43:30 INFO : modules to insert
19:43:30 DEBUG : getModuleLocation: 2.6.23-0.214.rc8.git2.fc8/i586
19:43:30 INFO : load module set done
19:43:30 INFO : found USB controller uhci-hcd
19:43:30 INFO : modules to insert
19:43:30 DEBUG : getModuleLocation: 2.6.23-0.214.rc8.git2.fc8/i586
19:43:30 INFO : load module set done
19:43:30 DEBUG : waiting for usb to become stable...
19:43:32 DEBUG : 2 seconds.
19:43:32 INFO : modules to insert hid keybdev
19:43:32 DEBUG : getModuleLocation: 2.6.23-0.214.rc8.git2.fc8/i586
19:43:32 DEBUG : module(s) hid keybdev not found
19:43:32 INFO : load module set done
19:43:33 INFO : no firewire controller found
19:43:33 DEBUG : found pcmcia adapter yenta_socket
19:43:33 INFO : modules to insert pcmcia_core yenta_socket pcmcia
19:43:33 DEBUG : getModuleLocation: 2.6.23-0.214.rc8.git2.fc8/i586
19:43:33 DEBUG : module(s) pcmcia_core yenta_socket pcmcia not found
19:43:33 INFO : load module set done
19:43:33 DEBUG : probing buses
19:43:34 DEBUG : finished bus probing
19:43:34 DEBUG : ignoring driverless device Unknown device 1180:0822
19:43:34 DEBUG : ignoring driverless device Intel Corporation Unknown device 24c6
19:43:34 DEBUG : ignoring driverless device Intel Corporation Unknown device 24c3
19:43:34 DEBUG : ignoring driverless device Intel Corporation Unknown device 24cc
19:43:34 DEBUG : ignoring driverless device Intel Corporation Unknown device 2448
19:43:34 DEBUG : ignoring driverless device Intel Corporation Unknown device 3585
19:43:34 DEBUG : ignoring driverless device Intel Corporation Unknown device 3584
19:43:34 DEBUG : ignoring driverless device Intel Corporation Unknown device 3580
19:43:34 DEBUG : ignoring driverless device Linux 2.6.23-0.214.rc8.git2.fc8 ehci_hcd EHCI Host Controller
19:43:34 DEBUG : ignoring driverless device Linux 2.6.23-0.214.rc8.git2.fc8 uhci_hcd UHCI Host Controller
19:43:34 DEBUG : ignoring driverless device Linux 2.6.23-0.214.rc8.git2.fc8 uhci_hcd UHCI Host Controller
19:43:34 DEBUG : ignoring driverless device Linux 2.6.23-0.214.rc8.git2.fc8 uhci_hcd UHCI Host Controller
19:43:34 DEBUG : ignoring driverless device Unknown device 168c:0013
19:43:34 DEBUG : ignoring driverless device Intel Corporation Unknown device 24c5
19:43:34 DEBUG : ignoring driverless device Intel Corporation 82852/855GM Integrated Graphics Device
19:43:34 DEBUG : ignoring driverless device Intel Corporation 82852/855GM Integrated Graphics Device
19:43:34 INFO : modules to insert e1000 yenta_socket libata ata_piix
19:43:34 DEBUG : getModuleLocation: 2.6.23-0.214.rc8.git2.fc8/i586
19:43:34 INFO : loaded e1000 from /modules/modules.cgz
19:43:34 INFO : loaded libata from /modules/modules.cgz
19:43:34 INFO : loaded ata_piix from /modules/modules.cgz
19:43:34 DEBUG : module(s) yenta_socket not found
19:43:34 INFO : inserted /tmp/e1000.ko
19:43:35 INFO : inserted /tmp/libata.ko
19:43:37 INFO : inserted /tmp/ata_piix.ko
19:43:37 INFO : load module set done
19:43:37 ERROR : got to setupCdrom without a CD device
19:43:44 DEBUG : going to set language to en_US.UTF-8
19:43:44 INFO : setting language to en_US.UTF-8
19:43:44 INFO : 52 keymaps are available
19:43:48 INFO : need to set up networking
19:43:48 INFO : going to pick interface
19:43:48 INFO : only have one network device: eth0
19:43:48 INFO : going to do getNetConfig
19:43:48 INFO : eth0 is not a wireless adapter
19:43:53 DEBUG : waiting for link eth0...
19:43:53 DEBUG : 0 seconds.
19:43:53 DEBUG : sending anaconda-Linux 2.6.23-0.214.rc8.git2.fc8 i686 as dhcp vendor-class
19:43:53 INFO : Listening on LPF/eth0/00:0a:e4:25:03:8f
19:43:53 INFO : Sending on LPF/eth0/00:0a:e4:25:03:8f
19:43:53 INFO : Sending on Socket/fallback
19:43:53 INFO : DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6
19:43:54 INFO : DHCPOFFER from 128.95.196.1
19:43:54 INFO : DHCPREQUEST on eth0 to 255.255.255.255 port 67
19:43:54 INFO : DHCPACK from 128.95.196.1
19:43:54 INFO : bound to 128.95.196.128 -- renewal in 14297 seconds.
19:43:54 DEBUG : device = eth0
19:43:54 DEBUG : broadcast = 128.95.196.255
19:43:54 DEBUG : netmask = 255.255.255.0
19:43:54 DEBUG : network = 128.95.196.0
19:43:54 DEBUG : gateway = 128.95.196.100
19:43:54 DEBUG : dns[0] = 128.95.196.1
19:43:54 DEBUG : dns[1] = 128.95.42.2
19:43:54 DEBUG : waiting for link eth0...
19:43:54 DEBUG : 0 seconds.
19:43:54 INFO : reverse name lookup worked
19:43:54 INFO : starting to STEP_URL
19:43:54 INFO : going to do nfsGetSetup
19:45:09 INFO : mounting nfs path vagabond:/home/gordon/Fedora-8-Test-3-i386
19:45:10 INFO : going to do nfsGetSetup
19:46:16 INFO : mounting nfs path vagabond:/home/gordon/Fedora-8-Test-3-i386
19:46:18 INFO : going to do nfsGetSetup
19:46:42 INFO : mounting nfs path vagabond:/home/gordon/Fedora-8-Test-3-i386
19:46:42 WARNING : unable to access /mnt/source/images/stage2.img
19:46:42 INFO : mntloop loop7 on /tmp/loopimage as /mnt/source/Fedora-7.92-i386-rescuecd.iso fd is 12
19:46:43 INFO : mntloop loop0 on /mnt/runtime as /tmp/loopimage/images/stage2.img fd is 12
19:46:43 INFO : umounting loopback /mnt/runtime loop0
19:46:43 INFO : umounting loopback /tmp/loopimage loop7
19:46:43 INFO : Path to valid iso is /mnt/source/Fedora-7.92-i386-rescuecd.iso
19:46:43 INFO : mntloop loop1 on /mnt/source2 as /mnt/source/Fedora-7.92-i386-rescuecd.iso fd is 11
19:46:44 ERROR : got to setupCdrom without a CD device
19:46:44 INFO : mntloop loop0 on /mnt/runtime as /mnt/source2/images/stage2.img fd is 11
19:46:44 INFO : got url nfsiso:/mnt/source
19:46:44 INFO : Loading SELinux policy
19:46:45 INFO : getting ready to spawn shell now
19:46:45 INFO : modules to insert ide-cd
19:46:45 DEBUG : getModuleLocation: 2.6.23-0.214.rc8.git2.fc8/i586
19:46:45 DEBUG : module(s) ide-cd not found
19:46:45 INFO : load module set done
19:46:45 INFO : modules to insert
19:46:45 DEBUG : getModuleLocation: 2.6.23-0.214.rc8.git2.fc8/i586
19:46:45 INFO : load module set done
19:46:45 INFO : modules to insert
19:46:45 DEBUG : getModuleLocation: 2.6.23-0.214.rc8.git2.fc8/i586
19:46:45 INFO : load module set done
19:46:45 INFO : modules to insert pcmcia_core yenta_socket pcmcia
19:46:45 DEBUG : getModuleLocation: 2.6.23-0.214.rc8.git2.fc8/i586
19:46:45 DEBUG : module(s) pcmcia_core yenta_socket pcmcia not found
19:46:45 INFO : load module set done
19:46:45 DEBUG : probing buses
19:46:45 DEBUG : finished bus probing
19:46:45 DEBUG : ignoring driverless device Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter
19:46:45 DEBUG : ignoring driverless device Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller
19:46:45 DEBUG : ignoring driverless device Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller
19:46:45 DEBUG : ignoring driverless device Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge
19:46:45 DEBUG : ignoring driverless device Intel Corporation 82801 Mobile PCI Bridge
19:46:45 DEBUG : ignoring driverless device Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller
19:46:45 DEBUG : ignoring driverless device Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller
19:46:45 DEBUG : ignoring driverless device Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller
19:46:45 DEBUG : ignoring driverless device Linux 2.6.23-0.214.rc8.git2.fc8 ehci_hcd EHCI Host Controller
19:46:45 DEBUG : ignoring driverless device Linux 2.6.23-0.214.rc8.git2.fc8 uhci_hcd UHCI Host Controller
19:46:45 DEBUG : ignoring driverless device Linux 2.6.23-0.214.rc8.git2.fc8 uhci_hcd UHCI Host Controller
19:46:45 DEBUG : ignoring driverless device Linux 2.6.23-0.214.rc8.git2.fc8 uhci_hcd UHCI Host Controller
19:46:45 DEBUG : ignoring driverless device Atheros Communications, Inc. AR5212 802.11abg NIC
19:46:45 DEBUG : ignoring driverless device Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller
19:46:45 DEBUG : ignoring driverless device Intel Corporation 82852/855GM Integrated Graphics Device
19:46:45 DEBUG : ignoring driverless device Intel Corporation 82852/855GM Integrated Graphics Device
19:46:45 INFO : modules to insert yenta_socket
19:46:45 DEBUG : getModuleLocation: 2.6.23-0.214.rc8.git2.fc8/i586
19:46:46 DEBUG : module(s) yenta_socket not found
19:46:46 INFO : load module set done
19:46:46 INFO : modules to insert md raid0 raid1 raid5 raid6 async_tx xor async_xor async_memcpy raid456 raid10 msdos gfs2 lock_nolock reiserfs jfs xfs dm-mod dm-zero dm-mirror dm-snapshot dm-multipath dm-round-robin dm-emc
19:46:46 DEBUG : getModuleLocation: 2.6.23-0.214.rc8.git2.fc8/i586
19:46:46 INFO : loaded raid0 from /modules/modules.cgz
19:46:46 INFO : loaded raid1 from /modules/modules.cgz
19:46:46 INFO : loaded async_tx from /modules/modules.cgz
19:46:46 INFO : loaded xor from /modules/modules.cgz
19:46:46 INFO : loaded async_xor from /modules/modules.cgz
19:46:46 INFO : loaded async_memcpy from /modules/modules.cgz
19:46:46 INFO : loaded raid456 from /modules/modules.cgz
19:46:46 INFO : loaded raid10 from /modules/modules.cgz
19:46:46 INFO : loaded msdos from /modules/modules.cgz
19:46:46 INFO : loaded gfs2 from /modules/modules.cgz
19:46:46 INFO : loaded lock_nolock from /modules/modules.cgz
19:46:46 INFO : loaded reiserfs from /modules/modules.cgz
19:46:46 INFO : loaded jfs from /modules/modules.cgz
19:46:46 INFO : loaded xfs from /modules/modules.cgz
19:46:46 INFO : loaded dm-mod from /modules/modules.cgz
19:46:46 INFO : loaded dm-zero from /modules/modules.cgz
19:46:46 INFO : loaded dm-mirror from /modules/modules.cgz
19:46:46 INFO : loaded dm-snapshot from /modules/modules.cgz
19:46:46 INFO : loaded dm-multipath from /modules/modules.cgz
19:46:46 INFO : loaded dm-round-robin from /modules/modules.cgz
19:46:46 INFO : loaded dm-emc from /modules/modules.cgz
19:46:46 DEBUG : module(s) md raid5 raid6 not found
19:46:46 INFO : inserted /tmp/raid0.ko
19:46:46 INFO : inserted /tmp/raid1.ko
19:46:46 INFO : inserted /tmp/async_tx.ko
19:46:46 INFO : inserted /tmp/xor.ko
19:46:46 INFO : inserted /tmp/async_xor.ko
19:46:46 INFO : inserted /tmp/async_memcpy.ko
19:46:46 INFO : inserted /tmp/raid456.ko
19:46:46 INFO : inserted /tmp/raid10.ko
19:46:46 INFO : inserted /tmp/msdos.ko
19:46:46 INFO : inserted /tmp/gfs2.ko
19:46:46 INFO : inserted /tmp/lock_nolock.ko
19:46:46 INFO : inserted /tmp/reiserfs.ko
19:46:46 INFO : inserted /tmp/jfs.ko
19:46:46 INFO : inserted /tmp/xfs.ko
19:46:46 INFO : inserted /tmp/dm-mod.ko
19:46:46 INFO : inserted /tmp/dm-zero.ko
19:46:46 INFO : inserted /tmp/dm-mirror.ko
19:46:46 INFO : inserted /tmp/dm-snapshot.ko
19:46:46 INFO : inserted /tmp/dm-multipath.ko
19:46:46 INFO : inserted /tmp/dm-round-robin.ko
19:46:46 INFO : inserted /tmp/dm-emc.ko
19:46:46 INFO : load module set done
19:46:46 INFO : looking for USB mouse...
19:46:46 INFO : Running anaconda script /usr/bin/anaconda
19:46:53 INFO : using only installclass _Fedora
19:46:53 INFO : anaconda called with cmdline = ['/usr/bin/anaconda', '-m', 'nfsiso:/mnt/source', '--noipv6', '--graphical', '--selinux', '--lang', 'en_US.UTF-8', '--keymap', 'us']
19:46:53 INFO : Display mode = g
19:46:53 INFO : Method = nfsiso:/mnt/source
19:46:54 WARNING : no floppy devices found but we'll try fd0 anyway
19:47:03 INFO : Started mini-wm
19:47:03 INFO : Starting graphical installation...
19:47:04 DEBUG : isys.py:mount()- going to mount /dev/loop2 on /mnt/cdimage
19:47:04 DEBUG : isys.py:mount()- going to mount /dev/loop2 on /mnt/cdimage
19:47:05 DEBUG : isys.py:mount()- going to mount /dev/loop3 on /tmp/isomedia
19:47:06 INFO : Detected 1008M of memory
19:47:06 INFO : Swap attempt of 1000M to 2000M
19:47:06 WARNING : step installtype does not exist
19:47:06 WARNING : step complete does not exist
19:47:08 INFO : moving (1) to step welcome
K
CPU: After all inits, caps: a7e9f3bf 00000000 00000000 00002040 00000180 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
ACPI: Core revision 20070126
CPU0: Intel(R) Pentium(R) M processor 1200MHz stepping 05
Total of 1 processors activated (2394.64 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Brought up 1 CPUs
sizeof(vma)=84 bytes
sizeof(page)=56 bytes
sizeof(inode)=604 bytes
sizeof(dentry)=160 bytes
sizeof(ext3inode)=856 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=180 bytes
sizeof(task_struct)=3376 bytes
khelper used greatest stack depth: 3160 bytes left
Booting paravirtualized kernel on bare hardware
khelper used greatest stack depth: 3084 bytes left
Time: 19:43:23 Date: 09/04/107
NET: Registered protocol family 16
ACPI: ACPI Dock Station Driver
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd8c8, last bus=5
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: EC: EC description table is found, configuring boot EC
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
ACPI: PCI Root Bridge [PCI0] (0000:00)
Force enabled HPET at base address 0xfed00000
PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 1180-11bf claimed by ICH4 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
khelper used greatest stack depth: 2876 bytes left
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: Power Resource [PUBS] (on)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet clockevent registered
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
Time: tsc clocksource has been installed.
pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
pnp: 00:00: iomem range 0xc0000-0xc3fff could not be reserved
pnp: 00:00: iomem range 0xc4000-0xc7fff could not be reserved
pnp: 00:00: iomem range 0xc8000-0xcbfff has been reserved
PCI: Bus 3, cardbus bridge: 0000:02:00.0
IO window: 00003000-000030ff
IO window: 00003400-000034ff
PREFETCH window: f0000000-f3ffffff
MEM window: d4000000-d7ffffff
PCI: Bridge: 0000:00:1e.0
IO window: 3000-7fff
MEM window: d0200000-dfffffff
PREFETCH window: f0000000-f7ffffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 65536 (order: 9, 2621440 bytes)
TCP bind hash table entries: 65536 (order: 9, 2359296 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Switched to high resolution mode on CPU 0
Freeing initrd memory: 6160k freed
Simple Boot Flag at 0x35 set to 0x1
IBM machine detected. Enabling interrupts during APM calls.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1191527003.099:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
khelper used greatest stack depth: 2760 bytes left
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key 4C62EC5D9B6F7A87
- User ID: Red Hat, Inc. (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:00:02.0
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU] (supports 8 throttling states)
ACPI: Thermal Zone [THM0] (35 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
khelper used greatest stack depth: 2756 bytes left
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.102
agpgart: Detected an Intel 855GM Chipset.
agpgart: Detected 8060K stolen memory.
agpgart: AGP aperture is 128M @ 0xe0000000
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
ACPI: PCI Interrupt 0000:00:1f.6[B] -> GSI 17 (level, low) -> IRQ 17
ACPI: PCI interrupt for device 0000:00:1f.6 disabled
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
input: Macintosh mouse button emulation as /class/input/input0
Yenta: CardBus bridge found at 0000:02:00.0 [1014:0555]
Yenta: ISA IRQ mask 0x0cb8, PCI irq 16
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x3000 - 0x7fff
cs: IO port probe 0x3000-0x7fff: clean.
pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xdfffffff
pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf7ffffff
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input1
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
Magic number: 11:25:748
Freeing unused kernel memory: 564k freed
Write protecting the kernel read-only data: 844k
modprobe used greatest stack depth: 2560 bytes left
IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /class/input/input2
loader used greatest stack depth: 2296 bytes left
loop: module loaded
Clocksource tsc unstable (delta = -139639622012 ns)
Time: hpet clocksource has been installed.
floppy0: no floppy controllers found
BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
input: PC Speaker as /class/input/input3
squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
SCSI subsystem initialized
Loading iSCSI transport class v2.0-724.
iscsi: registered transport (tcp)
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 18, io mem 0xd0100000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
loader used greatest stack depth: 1820 bytes left
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001820
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 20, io base 0x00001860
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
cs: IO port probe 0x100-0x3af: clean.
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
Copyright (c) 1999-2006 Intel Corporation.
ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 20 (level, low) -> IRQ 21
e1000: 0000:02:01.0: e1000_probe: (PCI:33MHz:32-bit) 00:0a:e4:25:03:8f
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
libata version 2.21 loaded.
ata_piix 0000:00:1f.1: version 2.12
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1f.1 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011810 irq 14
ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011818 irq 15
ata1.00: ATA-5: HITACHI_DK13FA-40B, 00MCA0B4, max UDMA/100
ata1.00: 78140160 sectors, multi 16: LBA
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA HITACHI_DK13FA-4 00MC PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
loader used greatest stack depth: 828 bytes left
e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
eth0: no IPv6 routers present
ISO 9660 Extensions: Microsoft Joliet Level 3
Unable to load NLS charset utf8
Unable to load NLS charset utf8
ISO 9660 Extensions: RRIP_1991A
ISOFS: Unable to identify CD-ROM format.
VFS: Can't find an ext2 filesystem on dev loop0.
ISO 9660 Extensions: Microsoft Joliet Level 3
Unable to load NLS charset utf8
Unable to load NLS charset utf8
ISO 9660 Extensions: RRIP_1991A
ISOFS: Unable to identify CD-ROM format.
VFS: Can't find an ext2 filesystem on dev loop0.
security: 5 users, 11 roles, 2284 types, 107 bools, 1 sens, 1024 cats
security: 67 classes, 227389 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev loop0, type squashfs), not configured for labeling
SELinux: initialized (dev loop1, type iso9660), uses genfs_contexts
SELinux: initialized (dev 0:15, type nfs), uses genfs_contexts
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
audit(1191527205.073:2): policy loaded auid=4294967295
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
async_tx: api initialized (async)
xor: automatically using best checksumming function: pIII_sse
pIII_sse : 3112.000 MB/sec
xor: using function: pIII_sse (3112.000 MB/sec)
raid6: int32x1 359 MB/s
raid6: int32x2 414 MB/s
raid6: int32x4 394 MB/s
raid6: int32x8 394 MB/s
raid6: mmxx1 1199 MB/s
raid6: mmxx2 1406 MB/s
raid6: sse1x1 898 MB/s
raid6: sse1x2 1457 MB/s
raid6: sse2x1 1570 MB/s
raid6: sse2x2 1671 MB/s
raid6: using algorithm sse2x2 (1671 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: raid10 personality registered for level 10
GFS2 (built Sep 28 2007 17:17:24) installed
Lock_Nolock (built Sep 28 2007 17:17:33) installed
JFS: nTxBlock = 7946, nTxLock = 63572
SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@xxxxxxxxxx
device-mapper: multipath: version 1.0.5 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
device-mapper: multipath emc: version 0.0.3 loaded
audit(1191527213.206:3): audit_pid=678 old=0 by auid=4294967295 subj=system_u:system_r:anaconda_t:s0
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
ISO 9660 Extensions: Microsoft Joliet Level 3
Unable to load NLS charset utf8
Unable to load NLS charset utf8
ISO 9660 Extensions: RRIP_1991A
SELinux: initialized (dev loop2, type iso9660), uses genfs_contexts
ISO 9660 Extensions: Microsoft Joliet Level 3
Unable to load NLS charset utf8
Unable to load NLS charset utf8
ISO 9660 Extensions: RRIP_1991A
SELinux: initialized (dev loop2, type iso9660), uses genfs_contexts
ISO 9660 Extensions: Microsoft Joliet Level 3
Unable to load NLS charset utf8
Unable to load NLS charset utf8
ISO 9660 Extensions: RRIP_1991A
SELinux: initialized (dev loop3, type iso9660), uses genfs_contexts
--
fedora-test-list mailing list
fedora-test-list@xxxxxxxxxx
To unsubscribe:
https://www.redhat.com/mailman/listinfo/fedora-test-list
