On Mon, 2006-06-26 at 13:24 -0400, glenn wrote: > I burnt the DVD for FC6 T1. > > I used the media check of the installer and the DVD passed. > > I use "linux text" as the install mode. This proceeded until as > expected until it went to format the disc. Then the install failed. > > I retried the proceed 3 times with the same result each time. > > I then attempted the default graphical install (UGH). > > I selected all pkgs and 'custom now'. I select everything except the > language options (selected 11 out of 36 possibilities). > > I selected activate eth0 at boot time. I specified the host name and > the host IP/mask. The installer warned I had not specified the gateway, > but did not offer a method to define the gateway. > > When the install completed, I had not network connectivity. > === > I then restarted the install, and tried manual vs DHCP for initializing > the network. Only DHCP would define the gateway. While I would supply > the parms to the MANUAL mode, the install warned I had NO gateway > specified. This is a useless configuration for me as I always specify > the host name and IP/mask manually. Thus I will be waiting for FC6 T2 > to see if there is anything useful in the install version. > BZ number? installer problem. > -- > Glenn Simpson VE3DSP > -- fedora-test-list mailing list fedora-test-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-test-list