On 3/3/06, Phil Knirsch <pknirsch@xxxxxxxxxx> wrote:
About 3 days ago, my laptop (Dell Latitude D600) stopped coming back from suspend, the hd light flickered but the screen wouldn't come back.
D Canfield wrote:
> Don Springall wrote:
>
>>
>> Is suspend/resume broken in rawhide for Kernel 2.6.16-rc5-git4 ? It
>> last worked for me in 2.6.16-rc5. Not seeing anything breaking in dmesg.
>>
>> I get I/O and then the screen flickers but stays blank. At that point
>> I have to pull the plug on power. ACPI messages look ok.
>
> I haven't had time to do a lot of testing, but suspend stopped working
> on my Thinkpad T43 (ATI Chipset, DRI turned off since this is the only
> way suspend has ever worked for me) sometime in the past week or two as
> well. And mere weeks after it had finally started working... :-(
>
> DC
>
I've done a few changes to the ATI scripts over the last few weeks
because we had at least one report where the old script failed. It looks
like this causes much more problems though than it solves, so i'm
reverting the changes back to what we had previously.
Attached is the original functions-ati from /etc/pm/functions-ati which
i'm putting back in as we speak.
Please give it a try with that one and let me know if it works. If it
doesn't then it's most likely a kernel bug that got introduced over the
last few weeks.
Read ya, Phil
--
Philipp Knirsch | Tel.: +49-711-96437-470
Development | Fax.: +49-711-96437-111
Red Hat GmbH | Email: Phil Knirsch <phil@xxxxxxxxx>
Hauptstaetterstr. 58 | Web: http://www.redhat.de/
D-70178 Stuttgart
Kaa's Law: In any sufficiently large group of people most are idiots.
#!/bin/bash
get_lcd_status()
{
if [ ! -x /usr/sbin/radeontool ]; then
echo "error"
return 2
fi
STATUS=$(/usr/sbin/radeontool light | cut -d\ -f5 2>/dev/null)
RETVAL=0
case "x$STATUS" in
"xon")
echo "on"
RETVAL=0
;;
"xoff")
echo "off"
RETVAL=1
;;
*)
echo "error"
RETVAL=2
;;
esac
return $RETVAL
}
lcd_off()
{
if [ "$(get_lcd_status)" != "on" ]; then
return
fi
[ -x /usr/sbin/radeontool] && /usr/sbin/radeontool light off
}
lcd_on()
{
if [ "$(get_lcd_status)" != "off" ]; then
return
fi
[ -x /usr/sbin/radeontool ] && /usr/sbin/radeontool light on
}
get_crt_status()
{
if [ ! -x /usr/sbin/radeontool ]; then
echo "error"
return 2
fi
STATUS=$(/usr/sbin/radeontool light | cut -d\ -f5 2>/dev/null)
RETVAL=0
case "x$STATUS" in
"xon")
echo "on"
RETVAL=0
;;
"xoff")
echo "off"
RETVAL=1
;;
*)
echo "error"
RETVAL=2
;;
esac
return $RETVAL
}
crt_off()
{
if [ "$(get_lcd_status)" != "on" ]; then
return
fi
[ -x /usr/sbin/radeontool ] && /usr/sbin/radeontool dac off
}
crt_on()
{
if [ "$(get_lcd_status)" != "on" ]; then
return
fi
[ -x /usr/sbin/radeontool ] && /usr/sbin/radeontool dac on
}
[ -x /usr/sbin/vbetool ] || return
suspend_video()
{
(
/usr/sbin/vbetool dpms suspend
) >/dev/null 2>&1
}
resume_video()
{
(
/usr/sbin/vbetool dpms on
) >/dev/null 2>&1
}
--
fedora-test-list mailing list
fedora-test-list@xxxxxxxxxx
To unsubscribe:
https://www.redhat.com/mailman/listinfo/fedora-test-list
I replaced with this, and I got my screen back, howerver my network didn't reconnect and had to run
dhclient eth0
I am at work at the moment and it is on a docking station if that matters./?
lspci -v | grep VGA
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R250 Lf [FireGL 9000] (rev 02) (prog-if 00 [VGA])
# lspci -v | egrep -i 'network|ethernet'
02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5705M Gigabit Ethernet (rev 01)
02:03.0 Network controller: Intel Corporation PRO/Wireless 2200BG (rev 05)
-- fedora-test-list mailing list fedora-test-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-test-list