On Tue, 2005-12-13 at 11:48 -0500, Peter Jones wrote: > So, without further fanfare: > > To enable this, add "dmraid" to the installer boot command line. Hi Peter. I have tested it with yesterday's rawhide. My system uses a sil3114 chip for raid, I created a mirror of two 250gig disks. Anaconda detected the raid and allowed me to install to it, however grub was not installed to the raid device. I had the boot order set for raid device first, but there is also 2 PATA disks in the system. The rescue mode couldn't / wouldn't create the /dev/mapper/sil_randomweirdstring entries for the raid device, so I booted into the full installer and chvt'd to a shell, then mounted the file systems and ran grub to install it on the raid device. Grub's config is a little confused. grub itself saw the raid device as (hd2,0), but in grub's config file I had to use (hd0,0) for it to find the boot directory right. Either way, upon reboot the root file system mounted was NOT raid, instead it used /dev/sda2. I haven't investigated too far into this, I'm updating to today's rawhide right now. However since the device is being accessed directly, I doubt I'll be able to boot the raid device at any time. Anything else I can provide for this please let me know. -- Jesse Keating RHCE (geek.j2solutions.net) Fedora Legacy Team (www.fedoralegacy.org) GPG Public Key (geek.j2solutions.net/jkeating.j2solutions.pub)
Attachment:
signature.asc
Description: This is a digitally signed message part
-- fedora-test-list mailing list fedora-test-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-test-list