Re: Kernel-Source-Code?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Am Mittwoch, den 30.11.2005, 11:19 -0600 schrieb Michael Favia:
> Roger Grosswiler wrote:
> > My D-Link DWL-G650+ was working on FC4 with 4K-Stacks. But it doesnt
> > now.
> > 
> > I get this after doing the modprobe (snip from dmesg):
> > 
> > ndiswrapper version 1.5 loaded (preempt=no,smp=no)
> > ndiswrapper: driver gplus (D-Link,04/09/2004,6.0.0.18) loaded
> > PCI: Enabling device 0000:06:00.0 (0000 -> 0002)
> > ACPI: PCI Interrupt 0000:06:00.0[A] -> Link [LNKD] -> GSI 11 (level,
> > low) -> IRQ 11
> > PCI: Setting latency timer of device 0000:06:00.0 to 64
> > ndiswrapper (miniport_init:767): couldn't initialize device: C0000001
> > ndiswrapper (ndiswrapper_start_device:1441): Windows driver couldn't
> > initialize
> > the device (C0000001)
> > ndiswrapper (ndiswrapper_add_pci_device:200): couldn't start device
> > ACPI: PCI interrupt for device 0000:06:00.0 disabled
> > ndiswrapper: probe of 0000:06:00.0 failed with error -22
> > 
> > possibly a simple acpi-error??
> > 
> > Roger
> > 
> > Am Dienstag, den 29.11.2005, 22:30 +0000 schrieb Mary Ellen Foster:
> >> On 11/29/05, Don Springall <don_springall@xxxxxxxxxxx> wrote:
> >>> Getting ndiswrapper to work is a pig. I am running it right now. You need to
> >>> run make xconfig and then go to the kernal hacking area and uncheck the use
> >>> 4k Stack option, This will give you 8k stacks which might work, If you need
> >>> 16K stacks for your card you are out of luck with Fedora.
> >> First, I'd try just building the driver and running without rebuilding
> >> the kernel -- there are cards (like mine [*]) for which 4k stacks are
> >> sufficient, which makes life much easier.
> >>
> >> MEF
> >>
> >> [*] "Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller
> >> (rev 03)", according to /sbin/lspci.
> >>
> >> --
> >> __ Mary Ellen Foster __ http://homepages.inf.ed.ac.uk/mef/ __
> >> "One of the main causes of the fall of the Roman Empire was that,
> >> lacking zero, they had no way to indicate successful termination
> >> of their C programs." (Robert Firth)
> >>
> > 
> Did you uninstall the windws driver and reinstall it when you upgraded 
> to FC5/ndis1.5? There is a new format. If not try so now. -mf
> 
it's been a fresh install, but even tough i tried it - without
success...i'm thinking about this :D-Link DWL-G730AP (needs NO driver at
all, but not built-in)

Rog

-- 
fedora-test-list mailing list
fedora-test-list@xxxxxxxxxx
To unsubscribe: 
https://www.redhat.com/mailman/listinfo/fedora-test-list

[Index of Archives]     [Fedora Desktop]     [Fedora SELinux]     [Photo Sharing]     [Yosemite Forum]     [KDE Users]