Roger Grosswiler wrote:
My D-Link DWL-G650+ was working on FC4 with 4K-Stacks. But it doesnt
now.
I get this after doing the modprobe (snip from dmesg):
ndiswrapper version 1.5 loaded (preempt=no,smp=no)
ndiswrapper: driver gplus (D-Link,04/09/2004,6.0.0.18) loaded
PCI: Enabling device 0000:06:00.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:06:00.0[A] -> Link [LNKD] -> GSI 11 (level,
low) -> IRQ 11
PCI: Setting latency timer of device 0000:06:00.0 to 64
ndiswrapper (miniport_init:767): couldn't initialize device: C0000001
ndiswrapper (ndiswrapper_start_device:1441): Windows driver couldn't
initialize
the device (C0000001)
ndiswrapper (ndiswrapper_add_pci_device:200): couldn't start device
ACPI: PCI interrupt for device 0000:06:00.0 disabled
ndiswrapper: probe of 0000:06:00.0 failed with error -22
possibly a simple acpi-error??
Roger
Am Dienstag, den 29.11.2005, 22:30 +0000 schrieb Mary Ellen Foster:
On 11/29/05, Don Springall <don_springall@xxxxxxxxxxx> wrote:
Getting ndiswrapper to work is a pig. I am running it right now. You need to
run make xconfig and then go to the kernal hacking area and uncheck the use
4k Stack option, This will give you 8k stacks which might work, If you need
16K stacks for your card you are out of luck with Fedora.
First, I'd try just building the driver and running without rebuilding
the kernel -- there are cards (like mine [*]) for which 4k stacks are
sufficient, which makes life much easier.
MEF
[*] "Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller
(rev 03)", according to /sbin/lspci.
--
__ Mary Ellen Foster __ http://homepages.inf.ed.ac.uk/mef/ __
"One of the main causes of the fall of the Roman Empire was that,
lacking zero, they had no way to indicate successful termination
of their C programs." (Robert Firth)
Did you uninstall the windws driver and reinstall it when you upgraded
to FC5/ndis1.5? There is a new format. If not try so now. -mf
--
fedora-test-list mailing list
fedora-test-list@xxxxxxxxxx
To unsubscribe:
https://www.redhat.com/mailman/listinfo/fedora-test-list