Sorry, forgot to add this detail:
[root@test ~]# lspci -vt
-+-[0000:01]-+-01.0 3Com Corporation 3c905B 100BaseTX [Cyclone]
| +-03.0 LSI Logic / Symbios Logic 53C896/897
| +-03.1 LSI Logic / Symbios Logic 53C896/897
| +-04.0-[0000:02]--
| \-04.1 Mylex Corporation DAC960PG
\-[0000:00]-+-08.0 LSI Logic / Symbios Logic 53c810
+-0a.0 Cirrus Logic GD 5480
+-0b.0 Intel Corporation 683053 Programmable Interrupt Device
+-0c.0 Intel Corporation 82371AB/EB/MB PIIX4 ISA
+-0c.1 Intel Corporation 82371AB/EB/MB PIIX4 IDE
+-0c.2 Intel Corporation 82371AB/EB/MB PIIX4 USB
+-0c.3 Intel Corporation 82371AB/EB/MB PIIX4 ACPI
+-10.0 Intel Corporation 450NX - 82451NX Memory & I/O
Controller
+-12.0 Intel Corporation 450NX - 82454NX/84460GX PCI
Expander Bridge
\-13.0 Intel Corporation 450NX - 82454NX/84460GX PCI
Expander Bridge
Mike Pepe wrote:
Hi all,
Just wanted to report that I got FC4T3 to install on an Intel SC450NX
server.
During install, the graphic mode wouldn't work. If anyone here has ever
had an Atari 2600 and turned it on with no cartridge installed; well,
that's what the screen looks like.
I installed in text mode, it worked fine.
When it boots and goes into graphics mode, I get the Atari Emulation
Mode again.
It worked fine in FC3, so this seems to be something new.
Anyone else see this happen?