VMware 5 does not install/work

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I tried to install VMware 5 on FC4T2 with all the latest updates
installed as of 20050421(today) and it does not work. Some parts of
the build fail... here is the relevant output.

--- snip ---
Trying to find a suitable vmmon module for your running kernel.

None of the pre-built vmmon modules for VMware Workstation is suitable for your
running kernel.  Do you want this program to try to build the vmmon module for
your system (you need to have a C compiler installed on your system)? [yes]

Using compiler "/usr/bin/gcc". Use environment variable CC to override.

What is the location of the directory of C header files that match your running
kernel? [/lib/modules/2.6.11-1.1253_FC4smp/build/include]

Extracting the sources of the vmmon module.

Building the vmmon module.

Using 2.6.x kernel build system.
make: Entering directory `/tmp/vmware-config0/vmmon-only'
make -C /lib/modules/2.6.11-1.1253_FC4smp/build/include/..
SUBDIRS=$PWD SRCROOT=$PWD/. modules
make[1]: Entering directory `/usr/src/kernels/2.6.11-1.1253_FC4-smp-i686'
  CC [M]  /tmp/vmware-config0/vmmon-only/linux/driver.o
  CC [M]  /tmp/vmware-config0/vmmon-only/linux/hostif.o
  CC [M]  /tmp/vmware-config0/vmmon-only/common/cpuid.o
  CC [M]  /tmp/vmware-config0/vmmon-only/common/hash.o
  CC [M]  /tmp/vmware-config0/vmmon-only/common/memtrack.o
  CC [M]  /tmp/vmware-config0/vmmon-only/common/phystrack.o
  CC [M]  /tmp/vmware-config0/vmmon-only/common/task.o
  CC [M]  /tmp/vmware-config0/vmmon-only/common/vmx86.o
  CC [M]  /tmp/vmware-config0/vmmon-only/vmcore/moduleloop.o
  LD [M]  /tmp/vmware-config0/vmmon-only/vmmon.o
  Building modules, stage 2.
  MODPOST
  CC      /tmp/vmware-config0/vmmon-only/vmmon.mod.o
  LD [M]  /tmp/vmware-config0/vmmon-only/vmmon.ko
make[1]: Leaving directory `/usr/src/kernels/2.6.11-1.1253_FC4-smp-i686'
cp -f vmmon.ko ./../vmmon.o
make: Leaving directory `/tmp/vmware-config0/vmmon-only'
The module loads perfectly in the running kernel.

You have already setup networking.

Would you like to skip networking setup and keep your old settings as they are?
(yes/no) [yes] no

Do you want networking for your virtual machines? (yes/no/help) [yes]

Would you prefer to modify your existing networking configuration using the
wizard or the editor? (wizard/editor/help) [wizard]

The following bridged networks have been defined:

. vmnet0 is bridged to eth0

All your ethernet interfaces are already bridged.

Do you want to be able to use NAT networking in your virtual machines? (yes/no)
[yes]

The following NAT networks have been defined:

. vmnet8 is a NAT network on private subnet 192.168.72.0.

Do you wish to configure another NAT network? (yes/no) [no]

Do you want to be able to use host-only networking in your virtual machines?
[yes] no

Extracting the sources of the vmnet module.

Building the vmnet module.

Using 2.6.x kernel build system.
make: Entering directory `/tmp/vmware-config0/vmnet-only'
make -C /lib/modules/2.6.11-1.1253_FC4smp/build/include/..
SUBDIRS=$PWD SRCROOT=$PWD/. modules
make[1]: Entering directory `/usr/src/kernels/2.6.11-1.1253_FC4-smp-i686'
  CC [M]  /tmp/vmware-config0/vmnet-only/driver.o
  CC [M]  /tmp/vmware-config0/vmnet-only/hub.o
  CC [M]  /tmp/vmware-config0/vmnet-only/userif.o
/tmp/vmware-config0/vmnet-only/userif.c: In function 'VNetUserIfMapUint32Ptr':
/tmp/vmware-config0/vmnet-only/userif.c:152: warning: 'verify_area' is
deprecated (declared at include/asm/uaccess.h:105)
/tmp/vmware-config0/vmnet-only/userif.c:153: warning: 'verify_area' is
deprecated (declared at include/asm/uaccess.h:105)
  CC [M]  /tmp/vmware-config0/vmnet-only/netif.o
  CC [M]  /tmp/vmware-config0/vmnet-only/bridge.o
/tmp/vmware-config0/vmnet-only/bridge.c: In function 'VNetBridgeUp':
/tmp/vmware-config0/vmnet-only/bridge.c:716: warning: passing argument
3 of 'sk_alloc' makes pointer from integer without a cast
/tmp/vmware-config0/vmnet-only/bridge.c:716: warning: passing argument
4 of 'sk_alloc' makes integer from pointer without a cast
  CC [M]  /tmp/vmware-config0/vmnet-only/procfs.o
  LD [M]  /tmp/vmware-config0/vmnet-only/vmnet.o
  Building modules, stage 2.
  MODPOST
Warning: could not open /tmp/vmware-config0/vmnet-only/includeCheck.h:
Invalid argument
  CC      /tmp/vmware-config0/vmnet-only/vmnet.mod.o
  LD [M]  /tmp/vmware-config0/vmnet-only/vmnet.ko
make[1]: Leaving directory `/usr/src/kernels/2.6.11-1.1253_FC4-smp-i686'
cp -f vmnet.ko ./../vmnet.o
make: Leaving directory `/tmp/vmware-config0/vmnet-only'
The module loads perfectly in the running kernel.

Starting VMware services:
   Virtual machine monitor                                 [  OK  ]
   Virtual ethernet                                        [  OK  ]
   Bridged networking on /dev/vmnet0                       [FAILED]
   Host-only networking on /dev/vmnet8 (background)        [  OK  ]
   NAT service on /dev/vmnet8                              [  OK  ]

The configuration of VMware Workstation 5.0.0 build-13124 for Linux for this
running kernel completed successfully.

You can now run VMware Workstation by invoking the following command:
"/usr/bin/vmware".

Enjoy,

--the VMware team

[mgalvin@localhost vmware-distrib]$ vmware
vmware is installed, but it has not been (correctly) configured
for this system. To (re-)configure it, invoke the following command:
/usr/bin/vmware-config.pl.
--- snip ---



vmware-any-any-update90 gives me



--- snip ---
[mgalvin@localhost vmware-any-any-update90]$ sudo ./runme.pl
Password:
Updating /usr/bin/vmware ... No patch needed/available
Updating /usr/bin/vmnet-bridge ... No patch needed/available
Updating /usr/lib/vmware/bin/vmware-vmx ... No patch needed/available
Updating /usr/lib/vmware/bin-debug/vmware-vmx ... No patch needed/available
VMware modules in "/usr/lib/vmware/modules/source" has been updated.

Before running VMware for the first time after update, you need to configure it
for your running kernel by invoking the following command:
"/usr/bin/vmware-config.pl". Do you want this script to invoke the command for
you now? [yes]
--- snip ---


and then it just hangs and does nothing.

Does anyone know of a fix/work-around to get VMware working within fc4t2?

Thanks,

Matt


[Index of Archives]     [Fedora Desktop]     [Fedora SELinux]     [Photo Sharing]     [Yosemite Forum]     [KDE Users]