On Tue, 2005-19-04 at 14:25 -0400, David Niemi wrote: > Has the X11.conf changed between FC3 and FC4 T2? > > On my FC3 machine I have an ATI 9200 and on the machine I want to try > FC4 T2 it has only a 32M VIA unichrome (S3) on board. The monitor is a > Samsung SyncMaster 192N which was properly recognized by FC4 (not FC3) > through a KVM. The maximum frequency for this LCD is 60Hz. > > The install went fine when I set the resolution=1280x1024 but then > wouldn't boot into X. I modified the some of the settings for the > horizontal and vertical syncing to a) the manual listed settings, and b) > the settings in my FC3 X11.conf > > For the resolution, initially there was only 800x600 and 640x480 in the > FC4_T2 X11.conf, so added a "1024x768" resolution. I haven't tried to > add the 1280x1024 resolution to the conf file yet. Once I added 1280x1024 to the X11.conf things worked. Now to solve the "audit-0.6.10.1i386" scriplet fails during yum update ...