I did a default custom install of FC3 and was able to install everything just fine. I have no problems with installation, but I am unable to access my scsi tape drive (A Sony SDT-11000: Channel 1 ID 6). Under FC1 I was able to access the tape drive via /dev/st0 & /dev/nst0. When I do the following command: Am I missing something? ~]# mt -f /dev/st0 rewind I get No such file or directory. I have looked in /dev and there is no st0 or nst0 Hardware: Supermicro P4DP6/E7500/Adaptec 7899W Ultra 160 Dual Xeon 2.4 4 GB RAM Adaptec 2000S zero-channel RAID controller 32MB (BIOS 1.41 2001/07/13) Matrox G540 Dual Head Video Controller Soundblaster Live 5.1 Sony SDT-11000 DDS-4 68-pin Ultra 2/LVD -Eric -- Eric Hoeve fedora at ehoeve dot com