On Wed, Apr 18, 2012 at 10:32 AM, Tommy Pham <tommyhp2@xxxxxxxxx> wrote: > On Wed, Apr 18, 2012 at 10:00 AM, Felix Miata <mrmazda@xxxxxxxxxxxxx> wrote: >> On 2012/04/18 09:42 (GMT-0700) Tommy Pham composed: >> >>> Tried a i386 F17 Beta on an old Dell Optiplex GX280 machine here at >>> work and works fine. However my new upgraded home machine fails :( >> >> >>> Hardware info: >> >> >>> * Gigabyte GA-990FXA-UD5 AM3+ AMD 990FX SATA 6Gb/s USB 3.0 ATX >>> * 3ware 9650SE-8LPML with 4x HDD on RAID5 >>> * DVD-RW connected to a mobo SATA connection. >> >> >>> All mobo SATAs (including eSATA) are set to AHCI, only the DVD-RW is >>> connected to the mobo SATA. >> >> >> Presumably you mean all SATA on the new machine are set to AHCI? I can't >> find an AHCI setting in my GX280's BIOS, and would like to know where you >> did if you did. cf. https://bugzilla.novell.com/show_bug.cgi?id=757426#c23 >> -- >> "The wise are known for their understanding, and pleasant >> words are persuasive." Proverbs 16:21 (New Living Translation) >> >> Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! >> >> Felix Miata *** http://fm.no-ip.com/ >> -- > > Yes, I'm sorry I wasn't explicit about the problems and the hardware > info with related settings. The AHCI are set on my new Gigabyte mobo. > (I only tested the F17 beta on GX280 just to make sure that the GUI > install process should work.) Side note, I think there's like 3 SATA > chip for that Gigabyte mobo: 1 AMD SB950 (4 SATA ports) and 2 x > Marvell 88SE9172 chips (2 internal + 2 eSATA). I also remembering > seeing that the kernel did detect that Marvell chip. I'll check on > the messages later when I get home to get the details. > > Thanks, > Tommy I did something last night that really broke F17. Unfortunately, I was a bit tired and didn't keep track of the things I did so I couldn't restore it. So I reinstalled F16 and about to do preupgrade to F17 again because the F17 alpha would only give me bare minimal install. Haven't had the chance to burn a F17 beta DVD yet. OK here is the info on new upgraded system (UUID 1e8f3c02-9ccd-45f7-9060-68f4d0aea671 - ID of submitted system profile - of reinstalled F16 from DVD)... [root@fedora /]# yum update Loaded plugins: langpacks, presto, refresh-packagekit No Packages marked for Update [root@fedora /]# uname -a Linux fedora.workgroup.domain 3.3.1-5.fc16.x86_64 #1 SMP Tue Apr 10 19:56:52 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux [root@fedora /]# grep -i 'sata' /var/log/messages Apr 18 18:02:14 fedora kernel: [ 0.939482] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode Apr 18 18:02:14 fedora kernel: [ 0.940336] ata1: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff100 irq 19 Apr 18 18:02:14 fedora kernel: [ 0.940340] ata2: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff180 irq 19 Apr 18 18:02:14 fedora kernel: [ 0.940343] ata3: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff200 irq 19 Apr 18 18:02:14 fedora kernel: [ 0.940346] ata4: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff280 irq 19 Apr 18 18:02:14 fedora kernel: [ 0.940482] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode Apr 18 18:02:14 fedora kernel: [ 0.940864] ata5: SATA max UDMA/133 abar m512@0xfdaff000 port 0xfdaff100 irq 41 Apr 18 18:02:14 fedora kernel: [ 0.940867] ata6: SATA max UDMA/133 abar m512@0xfdaff000 port 0xfdaff180 irq 41 Apr 18 18:02:14 fedora kernel: [ 0.940994] ahci 0000:0a:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode Apr 18 18:02:14 fedora kernel: [ 0.941390] ata7: SATA max UDMA/133 abar m512@0xfd0ff000 port 0xfd0ff100 irq 42 Apr 18 18:02:14 fedora kernel: [ 0.941393] ata8: SATA max UDMA/133 abar m512@0xfd0ff000 port 0xfd0ff180 irq 42 Apr 18 18:02:14 fedora kernel: [ 1.245074] ata5: SATA link down (SStatus 0 SControl 300) Apr 18 18:02:14 fedora kernel: [ 1.245080] ata4: SATA link down (SStatus 0 SControl 300) Apr 18 18:02:14 fedora kernel: [ 1.245109] ata6: SATA link down (SStatus 0 SControl 300) Apr 18 18:02:14 fedora kernel: [ 1.245116] ata2: SATA link down (SStatus 0 SControl 300) Apr 18 18:02:14 fedora kernel: [ 1.245149] ata1: SATA link down (SStatus 0 SControl 300) Apr 18 18:02:14 fedora kernel: [ 1.245172] ata3: SATA link down (SStatus 0 SControl 300) Apr 18 18:02:14 fedora kernel: [ 1.247052] ata7: SATA link down (SStatus 0 SControl 300) Apr 18 18:02:14 fedora kernel: [ 1.401071] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 18 18:02:14 fedora kernel: [ 1.404803] ata8: limiting SATA link speed to 1.5 Gbps Apr 18 18:02:14 fedora kernel: [ 6.861230] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 310) Apr 18 18:02:14 fedora kernel: [ 12.321242] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ** Note that my DVD-RW is installed on ata8 since that's the only port with link up. [root@fedora /]# lspci|egrep -i '(sb9x|marvell)' 00:11.0 SATA controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] (rev 40) << provide 4 ports as seen in messages 00:12.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:12.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:13.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:13.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:14.1 IDE interface: ATI Technologies Inc SB7x0/SB8x0/SB9x0 IDE Controller (rev 40) 00:14.3 ISA bridge: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller (rev 40) 00:14.5 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI2 Controller 00:16.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:16.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 03:00.0 SATA controller: Marvell Technology Group Ltd. Device 9172 (rev 11) << provide 2 ports as seen in messages 0a:00.0 SATA controller: Marvell Technology Group Ltd. Device 9172 (rev 11) << provide 2 ports as seen in messages for total of 8 SATA (including 2 eSATA) ports. [root@fedora /]# ls /dev/s* /dev/sda /dev/sda1 /dev/sda2 /dev/sda3 /dev/sda4 /dev/sda5 /dev/sda6 /dev/sda7 /dev/sg0 /dev/snapshot /dev/stderr /dev/stdin /dev/stdout /dev/systty IIRC, the removable optical drive is usually sr0, sr1, etc... right? And snippet of menuentry from /boot/grub2/grub.cfg ### BEGIN /etc/grub.d/10_linux ### menuentry 'Fedora Linux, with Linux 3.3.1-5.fc16.x86_64' --class fedora --class gnu-linux --class gnu --class os { load_video set gfxpayload=keep insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos2)' search --no-floppy --fs-uuid --set=root e807fecb-ecff-458b-8822-8a743cac1f58 echo 'Loading Linux 3.3.1-5.fc16.x86_64 ...' linux /vmlinuz-3.3.1-5.fc16.x86_64 root=UUID=ddd4e85b-05d5-496b-9c1c-4776efaec55c ro nomodeset rd.md=0 rd.lvm=0 rd.dm=0 acpi=no KEYTABLE=us quiet SYSFONT=latarcyrheb-sun16 rhgb rd.luks=0 LANG=en_US.UTF-8 echo 'Loading initial ramdisk ...' initrd /initramfs-3.3.1-5.fc16.x86_64.img } Thanks, Tommy -- test mailing list test@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe: https://admin.fedoraproject.org/mailman/listinfo/test
