Build problems - any advice

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

anjuta-2.0.1 requires autogen to build (this is a 4th package required
for the build - tsk). I've downloaded the srpm from sourceforge and
installed it to my rpmbuild structure.

Next, I edited the spec file so that it conforms to the FC policies and
then tried to build. It went well until the make install which gave the
following

+ /usr/lib/rpm/check-rpaths /usr/lib/rpm/check-buildroot
*******************************************************************************
*
* WARNING: 'check-rpaths' detected a broken RPATH and will cause
'rpmbuild'
*          to fail. To ignore these errors, you can set the '$QA_RPATHS'
*          environment variable which is a bitmask allowing the values
*          below. The current value of QA_RPATHS is 0x0000.
*
*    0x0001 ... standard RPATHs (e.g. /usr/lib); such RPATHs are a minor
*               issue but are introducing redundant searchpaths without
*               providing a benefit. They can also cause errors in
multilib
*               environments.
*    0x0002 ... invalid RPATHs; these are RPATHs which are neither
absolute
*               nor relative filenames and can therefore be a SECURITY
risk
*    0x0004 ... insecure RPATHs; these are relative RPATHs which are a
*               SECURITY risk
*    0x0008 ... the special '$ORIGIN' RPATHs are appearing after other
*               RPATHs; this is just a minor issue but usually unwanted
*    0x0010 ... the RPATH is empty; there is no reason for such RPATHs
*               and they cause unneeded work while loading libraries
*    0x0020 ... an RPATH references '..' of an absolute path; this will
break
*               the functionality when the path before '..' is a symlink
*          
*
* Examples:
* - to ignore standard and empty RPATHs, execute 'rpmbuild' like
*   $ QA_RPATHS=$[ 0x0001|0x0010 ] rpmbuild my-package.src.rpm
* - to check existing files, set $RPM_BUILD_ROOT and execute
check-rpaths like
*   $ RPM_BUILD_ROOT=<top-dir> /usr/lib/rpm/check-rpaths
*  
* 'check-rpaths' is part of 'fedora-rpmdevtools'.
*
*******************************************************************************
ERROR   0001: file '/usr/bin/xml2ag' contains a standard rpath
'/usr/lib64' in [/usr/lib64]
ERROR   0001: file '/usr/bin/getdefs' contains a standard rpath
'/usr/lib64' in [/usr/lib64]
ERROR   0001: file '/usr/bin/columns' contains a standard rpath
'/usr/lib64' in [/usr/lib64]
ERROR   0001: file '/usr/bin/autogen' contains a standard rpath
'/usr/lib64' in [/usr/lib64]
ERROR   0001: file '/usr/lib64/libguileopts.so.0.0.1' contains a
standard rpath '/usr/lib64' in [/usr/lib64]
error: Bad exit status from /var/tmp/rpm-tmp.65896 (%install)
    Bad exit status from /var/tmp/rpm-tmp.65896 (%install)

Is this a problem in the source or the spec file and if it's the spec
file, how do I fix it?

TTFN

Paul
-- 
"Träum's nicht, Lebe schon" - Dr. Frankenfurter, Rocky Horror Show

Attachment: signature.asc
Description: This is a digitally signed message part

-- 
fedora-extras-list mailing list
fedora-extras-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/fedora-extras-list

[Index of Archives]     [Fedora General Discussion]     [Fedora Art]     [Fedora Docs]     [Fedora Package Review]     [Fedora Desktop]     [Big List of Linux Books]     [Yosemite Backpacking]     [KDE Users]

  Powered by Linux